3 Way Clamp describes a spring clamp designed to press edge trim from three directions at once, so edgebanding and similar materials seat firmly along the edge and face during bonding. The clamp combines a usual spring clamp with an additional spring that adds the third direction of pressure, so the trim is held against both the edge and the surface instead of just pinched from the sides. This model is a 2-1/2 inch 3-way spring clamp with a 1-1/2 inch throat depth, so it reaches slightly back from the edge while still focusing force right where edging needs pressure. Approximately 30 lbs of edge pressure are applied by the springs, so the clamp delivers more force than tape for many edging jobs where a solid bond is critical.
The Fastcap 3 Way Clamp is built around a spring clamp and an additional spring that directs force into the edge, so edging is pressed snugly against the substrate along the glue line. With approximately 30 lbs of edge pressure available, a row of these clamps can be placed along a length of trim to keep the material seated where tape alone might not maintain enough force. The 1-1/2 inch throat depth allows the clamp to engage material slightly back from the edge, so both the edge and outer face of typical trim or edgebanding strips receive working pressure during bonding.
The 3 Way Spring Clamp is described as great for all types of edgebanding and general clamping purposes, so it fits routine shop work where edging, small parts, or narrow stock need held while adhesive sets. The integrated spring clamp and edge clamp arrangement applies pressure both across the workpiece and into the edge, so edging and similar trims are pressed firmly into place along corners and edges. The 2-1/2 inch size and 1-1/2 inch throat depth help the clamp sit comfortably over common panel and trim thicknesses, so it can be positioned along cabinet carcasses, shelves, and similar components without taking up excessive space. Non-marring rubber tips support this work by gripping surfaces while helping protect typical edging materials and finished faces from jaw marks during repetitive clamping.
The Fastcap 3 Way Clamp delivers approximately 30 lbs of edge pressure, so each clamp contributes meaningful force toward holding edging tightly against the substrate while adhesive cures. Because the clamp uses a usual spring clamp combined with an additional spring for the third direction of pressure, the user gains a consistent, repeatable clamping force each time the jaws are applied. Acting as both a spring clamp and edge clamp in one, the tool lets the installer stay with a single clamping motion rather than juggling separate devices for face and edge pressure. The simple to use and remove design helps these clamps shift quickly along a run of edging, so multiple sections of trim can be bonded in succession using the same group of clamps without changing tools.
The Fastcap 3 Way Clamp combines a spring clamp with an additional spring that adds third-direction pressure, so edge trim is pressed both inward and downward for improved bonding.
The 3 Way Clamp provides approximately 30 lbs of edge pressure, so it maintains firm contact between edging and substrate while adhesive cures during typical woodworking tasks.
The 3 Way Clamp uses non-marring rubber tips, so the jaws grip workpieces while helping protect edging and finished surfaces from marks during clamping.
The 3 Way Spring Clamp has a 1-1/2 inch throat depth, so it reaches slightly back from the edge to apply pressure where edging and trims are positioned.
The 3 Way Clamp is described as great for all types of edgebanding and general clamping purposes, so it serves multiple roles in typical woodworking shops.
The 3 Way Clamp uses a usual spring clamp combined with an additional spring that adds a third direction of pressure, so it delivers edge-focused force standard clamps do not provide.
The Fastcap 3 Way Clamp brings spring clamp convenience together with added edge-directed pressure, so edging and trims gain approximately 30 lbs of force along the bond line. With a 2-1/2 inch size, 1-1/2 inch throat depth, and non-marring rubber tips, it supports edgebanding and general clamping purposes in woodworking environments where firm, controlled pressure on edges matters.
Sold In: 1 Each