FlexTape LED Neutral White Tape Light For Runs

FlexTape LED 1.5W Neutral White Tape Light delivers a 20 foot roll of LED tape lighting that fits long cabinet, display, or task runs in one continuous strip, which helps keep light output consistent along the entire length. This Tresco Lighting tape uses 1.5 watts per foot, so power planning is straightforward when laying out 12V LED runs. The tape is stocked in 20 foot rolls, giving installers a predictable length to design around on repetitive projects. A 3500K neutral white color tone comes from the tape, which suits work surfaces where balanced, non-blue light is preferred. The product operates on 12V, matching common low-voltage LED systems used in many shop and cabinet installations. Average rated life of 25,000 hours means the tape is built for long-term installations where access behind cabinets or fixtures is limited once the job is complete.

Key FlexTape LED Details For Working Installers

• The tape is stocked in 20 foot rolls, giving a single long section that reduces mid-run joints, which can streamline layout on extended undercabinet or display applications.
• Power draw of 1.5 watts per foot sets a clear load requirement, helping layout of 12V power supplies and total run capacity on multi-section lighting jobs.
• A 3500K neutral white light color keeps output balanced between warm and cool, which supports use in work areas where color rendering needs to stay consistent across surfaces.
• The tape uses a 3M adhesive peel and stick back, so it adheres directly to a clean mounting surface, saving time versus mechanical mounting during installation.
• Average rated life of 25,000 hours gives the tape a long service window, which matters in built-in locations where later access to the LED strip is limited.
• The tape supports a 20 foot maximum length for a continuous run, so installers can plan segments within that limit to keep output even from end to end.

Installation Details For Tresco FlexTape LED Runs

The tape has a 3M adhesive peel and stick back, so installers press the strip directly to the mounting surface, which keeps install steps simple once the layout is marked. Tape can be cut every 3 inches, allowing sections to be trimmed to match cabinet lengths or shelf bays without large dark gaps. The tape is designed for a 20 foot maximum length for a continuous run, so each powered section is kept within that span to maintain proper electrical performance. The product operates on 12V, aligning with low-voltage LED power systems commonly used in cabinetry, displays, and casework. The tape can be inserted into straight feed, t-connector, or right-angle connectors, which gives options for routing around corners or branching off a main run.

Using FlexTape LED Tape Light In Real Projects

Where This FlexTape LED Tape Light Fits Best

This Tresco Lighting FlexTape LED 1.5W Neutral White Tape Light is stocked in 20 foot rolls, making it suited to long undercabinet, cove, or casework runs where a single continuous strip reduces visible joints. The 20 foot maximum length for a continuous run matches the stocked roll length, so each roll can be treated as one powered section on many layouts. A 3500K neutral white color point makes the tape appropriate for work surfaces and display areas that need balanced white light across materials and finishes. Because the tape operates on 12V, it integrates into low-voltage systems used in many woodworking and cabinet installations. Average rated life of 25,000 hours supports use in integrated millwork where lighting is expected to stay in place for years of regular use. Link cords available in 2, 6, 10, 24, 48, and 72 inch lengths (sold separately) allow the lit tape section to be separated from power or between runs while preserving the 12V layout.

Why Cut Points And Connectors Support Clean Results

The tape can be cut every 3 inches, so installers can finish runs close to actual cabinet or niche dimensions, which helps avoid large unlit gaps or bunched extra tape. This 3 inch cut increment creates predictable segment lengths that coordinate with standard cabinet modules and shelf spans. The tape can be easily inserted into any one of three connectors: straight feed, t-connector, or right-angle connector, which allows feed direction, branching, or turning corners without twisting the tape. Straight feed connectors keep power entry aligned with the tape, helping with clean end-to-end runs. T-connectors allow a branch to a perpendicular run, which suits island cabinets or intersecting shelves off a main line. Right-angle connectors turn the tape 90 degrees, which helps wrap light around cabinet corners while keeping the run electrically continuous. These connector options work with the 20 foot maximum length for a continuous run, letting installers divide projects into powered sections with orderly changes in direction.

Common Questions About FlexTape LED Neutral White

Selecting This FlexTape LED For Your Next Run

FlexTape LED 1.5W Neutral White Tape Light offers a 20 foot roll, 1.5 watts per foot load, and 3500K neutral white output, aligning with many 12V cabinet and casework layouts. With cut points every 3 inches and connector options for straight, T, and right-angle transitions, the tape supports clean layouts around corners and branches. For projects using Tresco fixtures, Tresco recommends pairing them with genuine Tresco transformers, power cables, connecting cables, and switches so the system components match their intended operating design on the job.