Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Cherry No Sap describes a hardwood plywood panel faced with cherry veneer that is specified as no sapwood, which supports a more consistent cherry appearance where uniform face color is required across visible surfaces. The panel is identified as a veneer core domestic product, so the core is a veneer-based construction sourced as a domestic plywood, which matters when projects call for this core type and origin category. The face veneer is noted as plain sliced, which yields a traditional sliced cherry look that suits projects needing a recognizable cherry grain pattern. The sheet is supplied unfinished, allowing finishing systems to be chosen and applied to match existing work or project standards. The A-1 grade designation ties the cherry faces to an A-grade face with a 1-grade back, which matters for work where one show face is primary and the reverse still needs a quality back. The panel thickness is listed as 3/4 inch, giving a common structural thickness for cabinetry, furniture panels, or casework. The size is specified as 49 x 97, which provides a slightly oversized panel relative to a 4 x 8 layout, useful when full coverage and trim allowances are important in layout.
The 3/4 inch thickness specified for this Rockshield Engineered Wood plywood establishes it as a common carcass and panel thickness, which helps with joinery setups that are already dialed in for three-quarter-inch materials. The 49 x 97 panel size slightly exceeds a nominal 4 x 8 footprint, which provides extra material around the edges for trimming, squaring, or fitting parts that need full-coverage dimensions. As a veneer core domestic cherry plywood, the internal construction uses veneer plies, which affects how blades and bits track through the sheet during ripping, crosscutting, and routing work. The combination of cherry no sap face, A-1 grade, and oversize dimensions supports layouts where show faces, door runs, and case parts are nested from a single sheet while maintaining an A-grade cherry presentation.
This plywood is identified as a hardwood cherry product within the plywood hardwoods category, placing it in applications where a genuine cherry veneer face is required on a plywood core. The A-1 grade status means the primary face is an A-grade cherry veneer, while the back is a 1-grade surface, which is well suited to cabinet exteriors where the front or outside is the show face and the interior still needs a clean, sound back. With the no sap specification on the cherry face, this panel works in jobs where a more uniform cherry tone is planned across multiple cabinet or panel pieces, such as banks of doors or continuous wall runs. The veneer core domestic construction places this panel in work where a veneer-based core is preferred over other core constructions when matching other veneer-core components in a build. The 3/4 inch thickness and 49 x 97 dimensions align with typical cabinet carcasses, end panels, shelves, and furniture parts that are laid out from standard-size sheets in a shop setting.
The plain sliced unfinished A-1 grade cherry face gives a predictable combination of grain style and surface readiness, which helps fabricators plan sanding and finishing steps without accommodating pre-finished surfaces or unusual grain cuts. Because the panel is designated cherry no sap, the face selection is defined to exclude sapwood, which reduces color variation that might otherwise appear when adjacent parts are cut from the same sheet, supporting more uniform face matching. The veneer core domestic notation ties directly to how the panel behaves under machining, since veneer plies present a familiar resistance and edge profile for saws and routers used routinely on veneer-core plywood. The 3/4 inch thickness simplifies integration with other three-quarter-inch components since shelf pins, dados, and joinery systems can be set using an established standard. The 49 x 97 dimensions offer a small amount of extra material beyond 4 x 8, which provides room for trimming cuts that square panels, remove handling edges, or fine-tune dimensions without sacrificing net part sizes. With the CPS75048A1NSVC manufacturer part number, the panel can be identified consistently whenever the same Rockshield Engineered Wood cherry A-1 plain sliced veneer core configuration is required again on follow-up or matching projects.
This plywood uses an A-1 grade, so the face is an A-grade cherry veneer and the back is a 1-grade surface, supporting show-face use with a quality reverse side.
The no sap designation directs that the cherry face is specified without sapwood, which supports a more uniform heartwood tone across visible panel areas.
This panel is identified as veneer core domestic, meaning the core is built from veneer plies in a domestic plywood construction, which affects machining behavior and fastener holding patterns.
The panel is listed at 3/4 inch thickness with overall dimensions of 49 x 97, providing a common structural thickness with slightly oversized sheet dimensions for layout and trimming.
This Rockshield Engineered Wood panel is identified as unfinished, so the cherry faces are supplied without a finish, allowing finishing systems to be applied as needed in the shop or field.
This product carries the Rockshield Engineered Wood brand and manufacturer part number CPS75048A1NSVC, which uniquely identifies this 3/4 inch 49 x 97 A-1 plain sliced cherry veneer core panel.
This Rockshield Engineered Wood plywood brings together a cherry no sap A-1 face, veneer core domestic construction, and 3/4 inch 49 x 97 sizing, which suits cabinet, furniture, and casework projects needing a genuine cherry appearance on a plywood platform. The plain sliced unfinished cherry veneer supports traditional cherry grain and on-site finishing, while the A-1 grade manages the balance between a show face and a solid back for interior exposure. With the CPS75048A1NSVC identifier, this specific cherry panel configuration can be specified whenever the same combination of species, grade, core type, and dimensions is required on current jobs or future matching work.
Sold In: 1 Sheet