Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Natural Maple describes this 48 x 96 inch sheet built as a hardwood plywood panel for woodworking projects where a maple face is required. The natural maple surface provides a familiar species look, which helps keep cabinet and furniture runs visually consistent from sheet to sheet. The panel uses a veneer core construction, giving it a plywood structure rather than a composite core, which supports standard cutting and handling techniques used in many woodworking shops. The 3/4 inch thickness creates a substantial panel profile that works well where a typical three-quarter build is part of the design. This sheet is supplied unfinished, so the surface arrives ready for your preferred sanding sequence and finishing system. The grade is described as Domestic A-1, which identifies a face grade and back grade combination used for woodworking where an A face and 1 back are appropriate.
This plywood hardwood panel arrives at a 3/4 inch thickness, allowing it to slot directly into builds designed around that material size without altering joinery dimensions. The 48 x 96 inch format supports ripping standard cabinet sides, shelves, and tops from a full sheet, which helps maintain repeatable part sizes. Because the panel uses a veneer core, cutting and machining proceed on a layered plywood structure, which fits well with typical cabinet saw and routing setups in woodworking shops. The natural maple face and A-1 grade description support use in areas where this face is exposed, while the unfinished status leaves surface preparation and coating steps within your existing finishing process.
This product is categorized as plywood hardwood in the board panel products group, placing it in the class of sheet goods used for woodworking and cabinet-related work. The natural maple face pairs with projects where visible surfaces follow a maple theme, helping jobs that rely on species continuity across doors, frames, and panels. The Domestic A-1 description signals a face and back grading approach used in applications that call for an A face, aligning the sheet with visible casework and similar workpieces. The 48 x 96 inch size gives you a typical 4 x 8 format for breaking down cabinet sides, stretchers, and dividers while keeping parts oriented with the grain direction you prefer on the maple face.
The 3/4 inch thickness of this plywood hardwood natural maple panel means layout and joinery can follow common three-quarter material assumptions, such as shelf pin placement and dado depths, without reworking measurements from other 3/4 inch stock. The veneer core construction establishes a layered plywood structure, which responds predictably when ripping, crosscutting, or routing parts for cabinets, furniture, and other woodworking assemblies. The unfinished surface lets the shop perform sanding, staining if desired, and topcoating in sequence with other maple components, supporting a single finishing schedule across the build. The use of Rockshield Engineered Wood as the brand identifies the manufacturer responsible for this NMRC75048A1WPFVC panel, which helps keep future reorders tied to the same identified product when matching previous projects.
The plywood hardwood natural maple panel measures 48 x 96 inches and has a 3/4 inch thickness, so layouts can follow standard 4 x 8 sheet sizing and three-quarter build assumptions in woodworking projects.
The panel uses a veneer core construction, so machining and cutting are performed on cross-laminated wood plies typical of plywood, supporting familiar shop workflows for casework and cabinetry.
The plywood hardwood natural maple sheet is supplied unfinished, leaving sanding and finishing steps to be completed within the shop so coatings match other project components.
The Domestic A-1 description identifies a grading approach with an A face and 1 back, positioning this plywood for woodworking where the face side is used as a visible surface.
This panel is produced under the Rockshield Engineered Wood brand, and the manufacturer part number NMRC75048A1WPFVC identifies this specific 3/4 inch, 48 x 96 inch maple plywood sheet.
The sheet is categorized as plywood hardwood within board panel products, aligning it with other hardwood-faced plywood options used in cabinetry and general woodworking.
This plywood hardwood natural maple sheet combines a 3/4 inch thickness, 48 x 96 inch size, veneer core build, and an unfinished Domestic A-1 maple face for woodworking applications. For projects organized around three-quarter maple casework using plywood construction, this Rockshield Engineered Wood NMRC75048A1WPFVC panel offers a defined species face, core type, and grading description that align with cabinet, furniture, and similar shop-built assemblies where maple surfaces are part of the design.
Sold In: 1 Sheet