Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Red Oak Rift describes a hardwood plywood panel made with a red oak rift face that gives cabinetmakers and millworkers a consistent linear grain surface for visible projects. The 3/4 inch thickness supplies substantial panel strength, which supports structural cabinet sides and shelving in typical woodworking layouts. The 49 x 97 panel size provides slightly oversize coverage beyond a 4 x 8 footprint, allowing trimming to clean factory edges while still yielding full-size components. The particle board core construction pairs the hardwood red oak veneer with a stable core layer, which helps panels sit flat during case assembly and machining. The unfinished surface gives finishers control over stain and topcoat systems, which matters when matching existing red oak work or building coordinated runs. Rockshield Engineered Wood branding identifies the manufacturer, which helps shops align future orders by part number.
The 3/4 inch Plywood Hardwood Red Oak, Rift, Particle Board Unfinished panel cuts and handles like a standard hardwood plywood thickness, which fits common saw setups, machining sequences, and joinery patterns in cabinet shops. The 49 x 97 size allows ripping full-height cabinet sides and tall panels while still leaving trim allowance for precise squaring during layout. The particle board core structure works with edge-banding processes that are designed for composite cores, which supports clean edges on exposed sides and shelves. The unfinished red oak rift face takes finishing steps after fabrication, allowing sanding, staining, and clear coats to be sequenced with other shop work for coordinated color and sheen. The Rockshield Engineered Wood identity and RRO75048A1MVCM part number support repeat fabrication setups by tying future orders to the same core and face configuration.
The Plywood Hardwood Red Oak, Rift, Particle Board Unfinished, 3/4 inch Thickness, 49 x 97 panel fits woodworking projects that call for a hardwood plywood surface with a red oak rift appearance on a composite core. The 3/4 inch thickness pairs well with cabinet carcasses, fixed shelving, and furniture-style panels, where panel rigidity under everyday loads is important. The 49 x 97 dimension lets shops orient parts along the red oak rift grain while still nesting components efficiently on a single sheet. The particle board core under the hardwood veneer suits interior millwork and cabinetry where a flat, balanced panel supports hinge, drawer, and shelf layouts. The A-1 red oak notation in the SAP description and product naming highlights the face orientation within the Rockshield Engineered Wood line, which helps position this panel for visible faces and coordinated matching across a room of work.
The 3/4 inch thickness on this Rockshield Engineered Wood plywood establishes a predictable baseline for joinery depths, groove locations, and hardware mounting zones across multiple projects. The 49 x 97 format gives extra length and width compared with nominal 4 x 8, which helps recover from layout adjustments while still achieving full-sized case parts without panel shortages. The red oak rift face delivers a straight-grain pattern that simplifies aligning grains across doors, drawer fronts, and end panels, which supports visually consistent installations. The particle board core interacts with tools as a composite substrate beneath the hardwood red oak veneer, supporting uniform machining when cutting dados, rabbets, and shelf notches. The RRO75048A1MVCM manufacturer part number links directly to this configuration, which helps production teams call out the same material when repeating jobs or expanding an existing installation.
The Plywood Hardwood Red Oak, Rift panel uses a particle board core under the hardwood veneer, which supports flat panels and consistent machining behavior in cabinet and millwork projects.
This Rockshield Engineered Wood panel has a 3/4 inch thickness, which matches common cabinet carcass and shelving dimensions for many shop layouts and cutting programs.
The panel size is 49 x 97, providing slightly oversize dimensions compared with nominal 4 x 8 sheets, which helps with trimming to square and optimizing part layouts.
The panel is described as Plywood Hardwood Red Oak, Rift with an A-1 red oak reference, indicating a red oak rift face suitable for visible surfaces in cabinetry and millwork.
This panel is manufactured by Rockshield Engineered Wood, which helps buyers align specifications and reorders using the same product line and face configuration.
The manufacturer part number RRO75048A1MVCM identifies this 3/4 inch, 49 x 97 Plywood Hardwood Red Oak, Rift, Particle Board Unfinished panel for ordering and project documentation.
The Plywood Hardwood Red Oak, Rift, Particle Board Unfinished, 3/4 inch Thickness, 49 x 97 panel from Rockshield Engineered Wood offers a defined combination of red oak rift face, particle board core, and oversize 4 x 8 format. Those attributes support cabinetry, millwork, and furniture-style projects that rely on consistent 3/4 inch material, straight-grain red oak faces, and composite-core machining characteristics. When a project calls for this specific configuration and appearance, selecting this RRO75048A1MVCM panel aligns shop material with the documented product identity from Wurth Baer Supply.
Sold In: 1 Sheet