Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Sapele is a Rockshield Engineered Wood panel built as a hardwood plywood in a 1/4 inch thickness, so it works where you need a stable, thin sheet for cabinet backs, drawer bottoms, or light millwork applications. The panel uses a veneer core construction, which supports typical woodworking operations such as cutting and machining that benefit from a core designed for panel use. The face and back are Sapele, giving you the look of this hardwood species on a plywood platform for projects that call for Sapele appearance on a sheet good. The sheet measures 49 x 97 inches, which gives a bit of extra size beyond nominal 4 x 8 to help with full-size layouts and trimming during installation or fabrication. This is a domestic unfinished A-4 grade panel, so the surface is supplied without finish, ready for your sanding and finishing system that matches the rest of the job.
This Rockshield Engineered Wood Sapele veneer core plywood in 1/4 inch thickness behaves like a thin hardwood panel during layout and installation, so it suits applications where you cut, size, and fasten a light sheet into cabinets or other assemblies. The 49 x 97 inch dimensions give flexibility during cutting, so you can route parts from the sheet while holding workable offcuts for smaller components. Because the panel is unfinished A-4 grade, surface preparation and finishing steps slot into your normal workflow, allowing you to sand, stain, or topcoat according to the finish schedule already in place on the job. The veneer core construction supports typical panel handling and machining that shops expect from hardwood plywood, so it fits into existing equipment setups for saws and other processing stations.
This Sapele veneer core plywood panel from Rockshield Engineered Wood sits in the plywood hardwoods category, so it aligns naturally with cabinet, fixture, and woodworking environments that use sheet goods in combination with solid wood. At 1/4 inch thickness, it fits roles where a full-thickness structural sheet is not required, such as cabinet backs, drawer bottoms, or light partitions inside casework. The 49 x 97 inch size supports layouts for tall cabinet sections or continuous backs within standard project footprints, letting you nest parts into a single sheet when planning cut lists. Because the panel is domestic unfinished A-4 grade, it slots into jobs that specify an unfinished plywood in this grade range, letting you handle finishing tasks in-house alongside other unfinished wood components.
The veneer core construction of this plywood establishes a predictable panel core, which supports repeatable machining when running multiple sheets through the same saw or processing line. Sapele on the face and back gives both sides of the sheet a consistent species appearance, which matters when visible faces and interior surfaces share the same panel in cabinets or millwork. The 1/4 inch thickness defines how the sheet fits into grooves, dados, or rabbets sized for quarter-inch material, which helps with joint sizing and stable fit once assembled. The 49 x 97 inch footprint keeps dimensions within typical panel handling limits while allowing slightly oversized cuts that you can bring to final size on the bench. The specific manufacturer part number MSRQ25048A4VC ties all of these characteristics together under one identifier, which supports consistent material selection across phases of the same project or across repeat projects that rely on the same Sapele plywood solution.
The MSRQ25048A4VC designation refers to a Rockshield Engineered Wood hardwood plywood panel, so it functions as a sheet good for woodworking and cabinet projects that call for plywood construction.
The panel measures 49 x 97 inches, which gives slightly more coverage than nominal 4 x 8 sizing and helps with layouts that benefit from extra trimming room or taller parts.
The Rockshield Engineered Wood Sapele plywood has a 1/4 inch thickness, which suits lighter panel roles such as cabinet backs or similar applications where a thinner sheet is required.
The veneer core description indicates a plywood-style core built from wood veneers, supporting typical panel machining and handling expected in woodworking shops using hardwood plywood products.
The panel is described as domestic unfinished A-4 grade, so it arrives without finish on the Sapele surfaces, ready for your own sanding and finishing processes on the project.
The Sapele hardwood face and back give the plywood sheet a Sapele appearance on both sides, allowing visible and interior cabinet surfaces to match other Sapele elements in the build.
This Rockshield Engineered Wood Sapele veneer core plywood combines a 1/4 inch thickness, 49 x 97 inch sheet size, and domestic unfinished A-4 grade in one MSRQ25048A4VC panel, giving you a defined material choice for Sapele-faced plywood work. When a project calls for Sapele appearance on a hardwood plywood platform with a veneer core and quarter-inch construction, this panel offers a consistent specification you can reference by part number on drawings and material lists. For cabinet, fixture, or general woodworking jobs that match these details, this sheet provides a straightforward way to align species, thickness, and grade in your panel selection.
Sold In: 1 Sheet
