Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Walnut is a walnut-faced plywood panel that provides a hardwood walnut appearance on a plywood core, which helps installers and shops bring a walnut look to cabinets, furniture, and other interior projects using sheet goods. The panel is manufactured by Rockshield Engineered Wood as a plywood product, so the engineered construction supports stable sheet handling during cutting and machining compared to working solid lumber for large surfaces. The walnut face is supplied unfinished, allowing finishers to apply their preferred stains or clear coats to match existing walnut work. This panel is identified as domestic in the product description, so it aligns with projects that call for domestically described walnut plywood. The plywood construction uses a veneer core, which gives the sheet a wood-veneer inner structure that responds predictably to saws and routers during fabrication. NAUF is specified in the description, meaning the panel is produced with no added urea formaldehyde, which matters wherever material selection policies call for NAUF-listed plywood.
This walnut plywood sheet is listed at 1/4 inch thickness, so it suits applications where a thinner panel is required, such as cabinet backs, door panels, or applied panels that do not need a thicker build. The dimensions are specified as 49 x 97, giving slightly oversize coverage over a nominal 4 x 8 footprint, which allows trimming edges to final size after handling, squaring, or fitting into casework. As a veneer core plywood product, the sheet is intended to be cut, routed, and machined using standard plywood tooling, which keeps shop workflows aligned with other veneer core stock. The unfinished walnut face lets installers and finishers sequence finishing operations after fitting and assembly, reducing touch-up around field cuts and edge details.
This Rockshield Engineered Wood product is categorized as a plywood hardwood walnut panel, so it fits work where a walnut appearance is needed on a panel substrate rather than solid lumber construction. The domestic designation in the description ties it to projects that prioritize domestically described hardwood plywood for consistency with other domestic walnut faces. The 49 x 97 size gives coverage beyond standard 4 x 8 nominal dimensions, which is useful when laying out full-height panels or wide cabinet backs that benefit from trim margins. With its 1/4 inch thickness, the sheet fits lighter-duty panel roles in cabinetry, millwork, or interior architectural elements where reduced thickness saves weight while still presenting a walnut surface. The veneer core supports common interior woodworking environments where panels are stored, cut, and assembled alongside other veneer core plywood products.
The A-4 grade callout gives a defined grading standard for the walnut plywood faces, so drafters and fabricators can match this panel to drawings that specify A-4 grade without guessing at surface expectations. Because the panel is unfinished, finish shops decide when to sand, seal, stain, or clear coat the walnut, which helps coordinate color matching across doors, face frames, and panel assemblies from the same finishing system. The NAUF designation describes production with no added urea formaldehyde, which supports projects where material lists differentiate between NAUF panels and conventional plywood. The veneer core construction means the interior plies are layered wood veneers, offering familiar cutting behavior for saws and CNC equipment in shops already set up for veneer core stock. The 1/4 inch thickness combined with the 49 x 97 format lets layout techs nest parts efficiently on a slightly oversized sheet, reducing waste and allowing tight part tolerances after trimming.
The panel is specified at 1/4 inch thickness, which suits lighter panel applications such as backs, door panels, and interior sections that do not require thicker sheet stock.
The panel dimensions are listed as 49 x 97, providing an oversized format relative to nominal 4 x 8 layouts, which allows trimming to precise final sizes during fabrication.
The product description specifies a veneer core, so the sheet is built from wood veneer plies, giving predictable behavior when cutting, routing, or machining the panel.
The description identifies the plywood as unfinished, so the walnut face is supplied without a factory finish, allowing custom finishing systems to be applied in the shop.
The panel is listed as NAUF, indicating no added urea formaldehyde in its production, which matters when project material lists specify NAUF plywood products.
The description calls this panel A-4 grade, giving a defined grading classification for the walnut plywood faces to match plans or specifications referencing A-4 walnut panels.
This Rockshield Engineered Wood Plywood Hardwood Walnut panel pairs an unfinished walnut face with a veneer core, so it supports walnut-faced interior panels where NAUF material, A-4 grade, and 1/4 inch thickness are specified. The 49 x 97 dimensions give layout flexibility for casework and millwork that benefit from slightly oversized sheets during cutting, trimming, and fitting. For projects calling for domestic walnut plywood with NAUF construction and controlled shop finishing, this panel provides a clearly defined specification to build from.
Sold In: 1 Sheet