Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PolyBak PB69 veneer backer sets up a stable backing surface for laminated substrates by using a Poly br Bak backer that balances the face material, which matters when you want flat panels that stay true after lamination. This backer from Richwood Industries is described as having just the right mix of performance and economy, so it is suited to everyday shop jobs where cost and consistency both affect project planning. As the top Poly br Bak backer in the PB69 line, it is positioned for standard performance needs instead of specialty extremes, which keeps selection straightforward for common panel builds. Being 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness, it resists tearing and damage during handling, trimming, and machining, which supports cleaner edges and fewer callbacks. The PB69 construction is most commonly used as a backer for laminated substrates, so it fits directly into laminate press workflows for casework, fixtures, and similar assemblies.
The nominal thickness of .020 inch on PolyBak PB69 veneer backer establishes a predictable layer within panel builds, which matters when you are matching panel thickness across a project or tying into hardware clearances. The 61 inch width on this PB69 61 x 1800 backer roll fits many full-size panel layouts, so you can cover large sheet goods with a single pass rather than seaming narrower backers. Being available in 1,800 lineal foot rolls means this Richwood PB69 backer roll can run through repeated layups before a changeover, which helps streamline handling around the press or lamination station. Because PB69 is most commonly used as a backer for laminated substrates, its dimensions are tailored to common sheet and component sizes, which supports straightforward cutting patterns and panel nesting. When PB69 is used as a paintable overlay for substrates and columns, the same .020 inch thickness keeps added build minimal while still delivering a consistent facing layer for paint systems.
PB69 Poly br Bak backer is most commonly used as a backer for laminated substrates, so it fits directly into workflows that build panels with decorative laminate on the face and a balancing layer on the back. In that role, the PB69 veneer backer helps balance stresses between the face laminate and the rear surface, which supports panels that stay flatter as environmental conditions change in normal service. Because the same PB69 material is also used as a paintable overlay for substrates and columns, it extends beyond flat panels into column wraps and similar architectural elements, giving fabricators one material that can address multiple surfaces. Using PB69 as a paintable overlay for substrates and columns means a shop can prepare a consistent base surface for paint, which matters when aiming for even color and texture across joined or curved elements. Across these uses, the brown color of the PB69 backer gives a neutral starting tone behind coatings or adjacent materials, which can help visual consistency when backs or interior faces remain visible.
Being 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness, PolyBak PB69 veneer backer offers significantly greater strength in a .020 inch profile, which matters when panels are handled repeatedly from press to saw to edge processing. That higher strength means the PB69 Poly br Bak backer is better able to resist tearing and surface damage than a typical saturated Kraft paper backer of the same thickness, supporting cleaner cuts and a more durable rear surface in service. The nominal thickness of .020 inch limits added bulk, so laminated substrates and paintable overlay assemblies built with PB69 remain close to standard panel thicknesses, which is important when fitting into casework systems or matching existing fixtures. With standard widths available at 49 and 61 inches, shops can match PolyBak PB69 veneer backer width to common sheet sizes, which reduces trimming effort and offcuts at the press and during saw optimization. The availability in 1,800 lineal foot rolls means a single Richwood PB69 backer roll can feed many panel cycles, which reduces roll changes and supports smoother production flow on larger projects. Seeing PB69 described as having just the right mix of performance and economy highlights its role as a standard performance level material, which helps align it to everyday laminated substrates and paintable overlay work rather than niche specialty tasks.
PolyBak PB69 veneer backer is most commonly used as a backer for laminated substrates and is also used as a paintable overlay for substrates and columns, supporting both laminate layups and paint-grade surfaces.
PolyBak PB69 veneer backer is 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness, which improves resistance to tearing and handling damage during lamination and machining.
The PB69 Poly br Bak backer has a nominal thickness of .020 inch, creating a thin balancing or overlay layer that supports panel stability while limiting changes to overall panel thickness.
PolyBak PB69 veneer backer is available in standard widths of 49 inches and 61 inches, aligning with common panel sizes to simplify layout and reduce trimming during lamination.
The PB69 61 x 1800 backer configuration uses a 61 inch width with availability in 1,800 lineal foot rolls, supporting extended production runs from a single roll setup.
PB69 Poly br Bak backer is described with a performance level of Standard and as having just the right mix of performance and economy, aligning it to routine laminated substrate and overlay applications.
The PolyBak PB69 veneer backer in this 61 inch by 1,800 foot configuration gives shops a long-running brown backer matched to common laminated substrates, which supports efficient panel production. With a nominal thickness of .020 inch, this PB69 Poly br Bak backer contributes strength and balance without significantly changing panel dimensions, which is important when working inside established cabinet or fixture systems. Being 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness, it stands up well during forming, trimming, and installation use, which supports durable backs and paintable overlay surfaces. For laminated substrates, substrates and columns where a paintable overlay or balanced backer is needed, aligning projects around the PB69 PolyBak specification from Richwood Industries keeps material selection consistent across runs.
