
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Plastic Round Wireless Micro Dimmer gives you single zone control of 12VDC lighting, so one area of cabinets or workspaces can be handled from a dedicated control point. The 0-100% dimming range and On/Off switching let you tune light output precisely, which helps match task lighting to different jobs without rewiring. The wireless design keeps walls and cabinet faces clean, because the dimming control does not rely on a hard-wired switch leg. The nickel finish ties in visually with other modern hardware, helping the control blend into finished millwork. As a Tresco Lighting dimmer, it is designed to work in their low-voltage lighting layouts, which supports consistent performance across a project. The unit operates on 12VDC systems, so it fits into typical low-voltage cabinet and display lighting setups used in woodworking and shop environments.
The mounting case for this Plastic Round Wireless Micro Dimmer can be mounted with screws, which anchors the dimmer firmly to wood or similar substrates so it will not shift when used repeatedly. The same case can also be mounted to a metallic surface, which gives flexibility on steel cabinets or shop fixtures where you want the dimmer accessible without altering the structure. The wireless link delivers a 65 ft range of control from Dimmer to Receiver, so receivers can be located near power supplies and fixtures while controls stay in user-friendly locations. As a single zone wireless dimmer, it pairs with one lighting zone at a time, which simplifies programming and avoids confusion when several zones exist in a project.
This single zone wireless dimmer is designed for 12VDC lighting, so it fits low-voltage cabinet, display, and task lighting runs driven by compatible drivers. Its round plastic form factor works well on cabinet sides, under-shelf faces, or nearby vertical surfaces where a small control is preferred. The nickel finish helps it sit visually alongside hinges, pulls, and other nickel-tone hardware, supporting a coordinated look across the installation. Because a single dimmer can be programmed to up to 10 different Receivers, one control can manage lighting over several cabinet banks or display sections in the same area. Conversely, the ability for a single Receiver to be programmed to up to 8 different Dimmers means this dimmer can support multi-point access to the same lights, such as at both ends of a long run of cabinetry.
The 65 ft range of control from Dimmer to Receiver means the dimmer can be located where it is convenient to reach during normal use, while the Universal Receiver can sit out of sight with the 12VDC wiring. This separation simplifies layouts because you can place receivers for clean wiring paths and locate controls purely for ergonomics. The 0-100% dim capability lets you set exact light levels for tasks or ambient lighting without using multiple devices, so adjustments become quick fine-tuning instead of rewiring or swapping components. The On/Off switching built into the same control keeps the workflow simple: one dimmer handles both power and intensity. The easy-to-replace long life lithium battery (Type CR2025) keeps the wireless function active without direct power wiring, which supports fast placement and later relocation if room layouts change. As part of a system that uses a Universal Receiver, the dimmer slots into Tresco Lighting micro dimmer setups, keeping control logic consistent across different sections of the same project.
The Plastic Round Wireless Micro Dimmer controls 12VDC lighting, so it works in low-voltage cabinet, display, or task lighting runs that operate on a 12VDC system.
The Plastic Round Wireless Micro Dimmer offers a 0-100% dim range with On/Off switching, so the same control handles both shutoff and fine light level adjustments.
The Plastic Round Wireless Micro Dimmer has a 65 ft range of control from Dimmer to Receiver, giving flexibility in placing receivers near power and fixtures.
The Plastic Round Wireless Micro Dimmer mounting case can be mounted with screws or to a metallic surface, supporting both fixed and metal-based installations.
The Plastic Round Wireless Micro Dimmer can be programmed to up to 10 different Receivers, letting one control handle several lighting sections.
The Plastic Round Wireless Micro Dimmer system allows a single Receiver to be programmed to up to 8 different Dimmers, enabling several control points for the same zone.
The Plastic Round Wireless Micro Dimmer from Tresco Lighting gives single zone wireless dimming and On/Off control for 12VDC lighting, so one part handles daily light adjustments. The 65 ft wireless range and 0-100% dim capability support practical control in kitchens, shops, or display runs where access matters. With programming that links multiple Receivers to one dimmer or multiple Dimmers to one Receiver, the unit adapts to straightforward or more complex layouts. For 12VDC installations using a Universal Receiver and needing a nickel-finished round wireless control, this dimmer aligns well with project demands.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSL-WLD-1WAL-WH-1 Mfr# L-WLD-1WAL-WH-1 | FREEDiM Wireless Single Zone Deco Wall Dimmer, 4", White | ||||
Sold in: 1 Each | RSL-WLD-3RMT-BL-1 Mfr# L-WLD-3RMT-BL-1 | 3-Zone Remote Control, 5-15/16", Black | ||||
Sold in: 1 Each | RSL-WLD-1REC-1 Mfr# L-WLD-1REC-1 | 60W Universal Receiver, 3-1/4", White |