Strikes for disc and pin tumbler locks describes these CompX National mounting plates that provide the fixed surface for the lock bolt to engage, so the lock can secure a door or panel at the designed position. The 2-3/16 x 1-1/4 plate size gives a defined footprint for layout, helping align the strike with the lock body in cabinetry or casework where space is tight. Zinc construction provides a consistent, stable surface for repeated lock engagement, which supports predictable performance over the life of the installation. As part of the Locks and Latches / Lock Accessories category, this strike works as a dedicated mating part in a lock system, separating the locking function between the lock body and the receiving plate for straightforward planning on shop drawings.
The 2-3/16 x 1-1/4 mounting plate dimension defines how much face area is available, which helps installers position the strike so the lock bolt enters cleanly without binding. The rectangular format works well at cabinet edges or case openings where a predictable straight reference is preferred. As a mounting plate specifically described for disc and pin tumbler locks, it supports alignment of those lock types so the latch action is centered in the opening prepared in the cabinet or frame.
This CompX National strike sits in the Locks and Latches / Lock Accessories class, which places it naturally in cabinet, casework, and similar woodworking assemblies that rely on small-format locks. The 2-3/16 x 1-1/4 footprint lines up well with typical stile or rail widths, so it can be laid out along a frame member without crowding neighboring hardware. Because it is described as an optional strike for both disc and pin tumbler locks, the same plate style can be used wherever those lock types are specified within a project, supporting a consistent appearance across multiple doors or panels. Its zinc construction integrates readily with other common cabinet hardware finishes in workshop or millwork settings, giving a neutral metal surface at the strike point.
The stated 2-3/16 x 1-1/4 size gives installers a fixed reference for drilling patterns and edge distances, which helps repeat the same lock-to-strike relationship from opening to opening. Having a plate that serves both disc and pin tumbler locks allows planners to standardize on one strike geometry, simplifying shop templates and reducing layout variation. The zinc material offers a stable interface for the lock bolt, so the contact point remains consistent as doors are operated over time in normal woodworking environments. The manufacturer part number C2016-2C provides a precise identifier for this specific mounting plate, which helps keep reorders aligned to the same strike style when expanding or matching existing installations.
This strike plate is described as optional strikes for both disc and pin tumbler locks, so it is intended to work within those lock families where that option is specified.
The C2016-2C mounting plate is listed as 2-3/16 x 1-1/4, providing a defined rectangular strike area for aligning the lock bolt on cabinet or casework openings.
The zinc construction gives a uniform metal surface for the lock bolt to meet, supporting consistent engagement depth and smooth locking action in typical woodworking environments.
This product is classified under Locks and Latches as a lock accessory strike, and identified by manufacturer part number C2016-2C for precise ordering.
The 2-3/16 x 1-1/4 dimensions define the face area available for mounting, helping installers plan screw placement and lock alignment within standard cabinet frame widths.
Being an optional strike for both disc and pin tumbler locks allows one plate design to serve multiple lock types, supporting consistent layouts across similar openings.
Choosing this CompX National C2016-2C strike gives you a defined 2-3/16 x 1-1/4 zinc mounting plate that matches optional strikes for both disc and pin tumbler locks, so lock and strike alignment can be planned around a single, consistent plate size.
Sold In: 1 Each