Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro LED tape linking wire is used to link two Pro branded LED Tapes together, so two tape runs function as one continuous lighting line without a gap in the system. This product belongs to the Connectors and Connecting Cables category, meaning it is designed specifically as part of the low-voltage lighting connection path. The Pro Value Series branding identifies it as part of a coordinated family of Pro LED tape components, which simplifies choosing matching parts on a project. The SAP description "TXT 72' PRO TAPE LINKING WIRE" and the part number L-PTCON-72IN-1 identify this exact 72-inch linking wire, helping you match documentation, drawings, or reorders. By using a dedicated linking wire between two Pro branded LED Tapes, the connection point is shifted away from the lighted surface, supporting cleaner layouts where tape segments need to bridge across breaks, corners, or transitions.
This linking wire is used with Pro branded LED Tapes, so its purpose is to serve as the connection between two tape sections in a Pro LED tape installation. Being part of the Connectors and Connecting Cables category, it is intended to handle the segment-to-segment link rather than power feed or control wiring, which clarifies where it belongs in the wiring layout. The product name describes it as Linking Wires Used with Pro LED Tape, aligning it directly with Pro LED tape lighting runs. When two Pro branded LED Tapes need to be joined while passing around an obstacle or transitioning between surfaces, this linking wire keeps them electrically connected as a single run while allowing a physical gap between the lit segments. The 72-inch reference in the SAP description points to a defined length that can span common distances between separated tape segments on a project.
The Web Description specifies that this wire is used to link two Pro branded LED Tapes together, so its primary location in the system is between separate tape sections that must remain on the same circuit. Because the product is categorized under Lighting and further in the Connectors and Connecting Cables class, it is intended to sit in the low-voltage side of a Pro LED tape installation rather than in unrelated wiring. The product name clearly states Linking Wires Used with Pro LED Tape, which ties the part directly to Pro LED tape strips wherever a gap, corner, cabinet break, or structural interruption exists. By placing this linking wire at those transition points between tape sections, the installer can keep light where it is needed while routing the connection through hidden spaces, helping maintain a clean visual result along the visible surfaces.
The SAP description TXT 72' PRO TAPE LINKING WIRE labels this product as a 72-inch linking wire, giving a straightforward indication of its reach between Pro branded LED Tapes on a run. That defined length helps plan tape layout on drawings, because tape segments can be separated by up to that span while remaining on the same connection path. The manufacturer part number L-PTCON-72IN-1 uniquely identifies this specific Pro Value Series linking wire, which simplifies specifying the part in job documents and reordering the exact same link for future work or service. With the product residing in the Connectors and Connecting Cables class, the part number also signals to purchasing or warehouse staff that it is a system connection component rather than tape or a power unit, reducing picking errors on larger lighting projects.
The Pro LED tape linking wire is used to link two Pro branded LED Tapes together, so separate tape sections act as one continuous lighting run across gaps or transitions.
This linking wire is used with Pro branded LED Tapes, so it is intended for tape sections within the Pro LED tape family rather than unrelated lighting products.
The TXT 72' PRO TAPE LINKING WIRE description indicates a 72-inch span, allowing up to that distance between two Pro branded LED Tapes while keeping them on the same run.
The product sits in the Lighting Connectors and Connecting Cables class, so it is typically used between Pro LED tape segments as part of the low-voltage connection path.
The L-PTCON-72IN-1 manufacturer part number uniquely identifies this Pro Value Series linking wire, simplifying specification, ordering, and reordering for consistent LED tape installations.
This product is listed under Lighting and the Connectors and Connecting Cables product class, marking it as a dedicated connection component for LED tape lighting systems.
The Linking Wires Used with Pro LED Tape - Pro Value Series L-PTCON-72IN-1 are defined as TXT 72' PRO TAPE LINKING WIRE and are used to link two Pro branded LED Tapes together. As a Lighting product in the Connectors and Connecting Cables class, it serves a focused role between Pro LED tape sections instead of general wiring tasks. When a layout calls for separated Pro branded LED Tapes that still operate as one run, this specific 72-inch Pro Value Series linking wire gives a clearly identified way to bridge that distance while staying within the same part family and documentation trail.
Sold In: 1 Each