Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
R145 custom interlink connectors are small white connectors designed for PRO Tape connector cables in lighting runs. Each connector is used to link two Pro branded LED tapes together, which keeps power flowing across tape gaps so a continuous lighting line can be maintained around corners or other breaks in the run. The connectors also are used to create custom lengths of linking wire, giving flexibility to route LED tape around obstacles while still using the same Pro tape system. With dimensions of 0.59 in. wide, 0.551 in. deep, and 0.382 in. high, these connectors stay compact in tight lighting cavities where space around cabinets or cases is limited. The white finish helps the connector blend with typical light-colored mounting surfaces near LED tape, which keeps the finished installation looking cleaner in visible areas.
This connector is identified as a custom interlink component for PRO Tape connector cables, which defines its role as the joining point between Pro branded LED tape sections or between tape and linking wire in a lighting system. The note that it is used to link two Pro branded LED tapes together indicates that both sides of the connector interface with that specific tape style, supporting clean transitions where tape segments need separation. Being used to create custom lengths of linking wire shows that the connector also interfaces with 18 gauge wire, part SZL-PWIRE25-RB-1, so installers can cut and route wire between tape sections while retaining a defined connection standard. The compact size of 0.59 in. by 0.551 in. by 0.382 in. indicates that these connectors sit comfortably in narrow channels or recesses, which matters when fitting LED tape systems into tight woodworking or cabinet spaces.
The product name "R145 custom interlink connectors for PRO Tape connector cables" shows that these connectors sit within the Pro Value Series lighting connectors and connecting cables family, placing them in LED tape lighting assemblies. The description that they are used to link two Pro branded LED tapes together points to applications wherever a continuous Pro LED tape line must cross a gap, such as between cabinets or around a corner in a run. Their use to create custom lengths of linking wire also means they are applied in sections where the installer prefers wire instead of tape, such as inside concealed channels, through structural members, or across transitions in casework. The compact dimensions of 0.59 in. W x 0.551 in. D x 0.382 in. H support use in low-clearance locations like undercabinet recesses or interior cabinet lighting channels.
Being defined as custom interlink connectors for PRO Tape connector cables means this part is purpose-built to work within a Pro branded LED tape system, which supports consistent terminations from one section to the next. The statement that it is used to link two Pro branded LED tapes together indicates that both connection points are tailored to that tape format, which helps maintain alignment and electrical continuity when building multi-segment runs. The ability to be used to create custom lengths of linking wire allows installers to decide how far apart tape segments should be, while still relying on the same connector interface at both ends of the wire. Calling out 18 gauge wire, part SZL-PWIRE25-RB-1, as the required component standardizes wire size and type, which supports predictable fit at each connector and consistent performance across the lighting system. The white connector body mentioned in the product wording integrates visually with common lighting environments, which helps completed installations look finished and professional.
The R145 custom interlink connector is used to link two Pro branded LED tapes together, which allows a continuous Pro LED tape run to cross gaps or transitions in a lighting layout.
The connectors are used to create custom lengths of linking wire, so installers can cut wire to length between Pro LED tape segments while still using the same connector interface.
The connector lists 18 gauge wire, part number SZL-PWIRE25-RB-1, as the required component, which defines the wire size and product that matches the connector design.
The connectors are part of lighting connectors and connecting cables, positioned between Pro branded LED tape segments or between tape and custom linking wire in a run.
The 0.59 in. W x 0.551 in. D x 0.382 in. H size keeps the connector compact, which helps it sit inside shallow recesses or behind trims in cabinet and casework installations.
The white finish described for the connector helps it visually blend near light-colored mounting surfaces, which supports a cleaner appearance in exposed or semi-visible lighting areas.
The R145 custom interlink connectors for PRO Tape connector cables are defined for use with Pro branded LED tapes, which aligns them with existing Pro lighting layouts in cabinets or displays. Their ability to link two Pro branded LED tapes together supports continuous tape runs across gaps or around corners while using known connection geometry. The function of creating custom lengths of linking wire with 18 gauge SZL-PWIRE25-RB-1 wire gives flexibility to route lighting where needed while maintaining a consistent connector standard. Using these compact white connectors where Pro LED tape segments meet can help keep lighting runs organized and visually clean in detailed woodworking and installation work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SZL-PWIRE25-RB-1 Mfr# L-PWIRE25-RB-1 | 300" Roll 18 Gauge Linking Wire, Red/Black |