Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Touch Dimmer 60 Watts Square defines this Pro Value Series dimmer as a compact 60 watt control unit built for 12VDC systems. It is used to dim Pro branded LED lights, so it ties directly into that low-voltage lighting line for consistent control. The square form factor keeps the footprint tight, which helps when integrating the dimmer into tight cabinet or furniture cavities. The nickel finish gives the visible surface a neutral look that blends with common modern hardware tones. Touch On/Off activation means the user only needs a light touch to switch the circuit, which simplifies operation in finished installations. The same touch interface provides 0-100% dimming control, so the installed Pro branded LED lights can be set for task brightness or softer accent levels as needed.
This touch dimmer measures 1-9/16 inches long by 1-1/4 inches wide by 3/8 inch high, giving it a shallow, compact profile that fits into slim cavities behind panels or within cabinet structures. The 96 inch input wire length provides reach from the dimmer back to the 12VDC source, which can simplify routing when the power supply is located away from the touch point. The 6 inch output wire length sets the connection distance between the dimmer and the Pro branded LED lights, concentrating the control close to the lighting run. Operating at 12VDC and rated for 60 watts, the dimmer aligns with common low-voltage LED power setups, which supports straightforward electrical integration.
This Pro Value Series touch dimmer is used to dim Pro branded LED lights, so it fits naturally into projects already built around that specific LED product family. The 12VDC rating matches typical low-voltage LED drivers, letting the dimmer sit in-line on the low-voltage side of the system. With a 60 watt capacity, it suits lighting layouts where the combined load of Pro branded LED lights stays within that range, concentrating control on medium-size runs often found in cabinetry or casework. The compact 1-9/16 inch by 1-1/4 inch by 3/8 inch square body helps when the design calls for a discreet control component that can live behind a touch surface without demanding much cavity depth. The nickel finish lets the dimmer present a neutral, hardware-like appearance when a part of it remains visible in a design.
The Touch On/Off function delivers a simple user action for switching the 12VDC circuit, which helps keep operation consistent across multiple installed locations using this same dimmer. Because the same touch surface also provides 0-100% dimming control, the installer can deliver full-range brightness adjustment on Pro branded LED lights from one compact point, reducing the need for separate control modules. The ETL Listed status indicates the dimmer has been evaluated to a recognized safety benchmark, which supports the use of this component in woodworking and architectural projects that rely on documented electrical parts. Its 96 inch input wire length creates flexibility in power routing, while the 6 inch output wire leads focus the connection near the light run, making cable management more predictable from job to job. With the 12VDC 60 watt specification clearly defined, lighting layouts can be repeated knowing how this dimmer behaves within that load window.
The Touch Dimmer 60 Watts, Square is used to dim Pro branded LED lights, so it is intended to control that specific LED lighting family in 12VDC applications.
The Touch Dimmer 60 Watts, Square is rated for 60 watts at 12VDC, which defines the low-voltage load it can handle in an LED lighting layout.
The dimmer uses a Touch On/Off function, so a touch on the control point turns the Pro branded LED lights on or off and also accesses 0-100% dimming control.
The Touch Dimmer 60 Watts, Square measures 1-9/16 inches long by 1-1/4 inches wide by 3/8 inch high, allowing use in shallow or tight mounting spaces.
The dimmer provides an input wire length of 96 inches and an output wire length of 6 inches, which defines how far it can sit from the power source and the LED lights.
The Touch Dimmer 60 Watts, Square is ETL Listed, meaning the dimmer has been evaluated to a recognized standard for electrical products.
The Touch Dimmer 60 Watts, Square from the Pro Value Series provides 12VDC, 60 watt control tailored to Pro branded LED lights, so it aligns with that lighting family from the start. Its Touch On/Off and 0-100% dimming control simplify how users interact with the lighting once installed, while the compact square size and defined wire lengths support tidy placement in cabinets, furniture, or millwork. For projects calling for an ETL Listed, low-voltage dimmer that matches Pro branded LED systems, this model delivers a clear, job-focused control solution.
Sold In: 1 Each