Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
R152 60W round touch dimmer is a Pro Value Series dimmer designed for use with Pro branded LED lights, so it gives a matched control solution for that lighting line. The dimmer is rated at 60W, which handles typical small to medium LED lighting runs in cabinet or furniture projects without overloading this control point. Its round touch interface switches lights On/Off by touch, which removes the need for a separate mechanical switch in many layouts. The same touch control also manages 0-100% dimming, so light levels can be set anywhere from full brightness to very low output for task or accent applications. The unit operates on 12VDC, aligning with common low-voltage LED systems used in shop-built installations. A 2-3/8 inch overall length allows this dimmer to fit into compact spaces where control still needs to be close to the fixture.
The dimmer body uses a 17/32 inch bore hole diameter, so a hole of that size is needed in the mounting surface for proper fit and retention. With an overall length of 2-3/8 inches, the unit extends behind the face material, which affects how deep the cavity or space behind the panel must be when planning placement. This dimmer works with 12VDC Pro branded LED lights, so it belongs in low-voltage sections of a lighting layout that follow that product line. The round nickel touch surface presents the active control point at the face of the hole, which lets the installer align the visible area with other hardware or design elements on the cabinet or fixture.
The R152 60W round touch dimmer is specified for Pro branded LED lights, so it is suited for projects built around that lighting family. Its 12VDC rating aligns with low-voltage LED runs often used in cabinetry, display cases, or furniture lighting where compact controls are needed. The 2-3/8 inch length and 17/32 inch bore hole requirement let the dimmer sit within panel thicknesses commonly found in wood components while leaving room behind for wiring space. Because it uses touch On/Off operation, the control point can be located where a traditional toggle or rocker might be visually distracting, such as on a finished cabinet side, toe-kick, or shelf underside. The nickel finish on the touch area coordinates with many metal hardware tones, so it can be placed in sight lines without clashing with pulls or hinges.
The 0-100% dimming control range allows precise adjustment from full output down to very low levels, so one dimmer can support different lighting scenes without changing the LED fixtures themselves. Because the dimmer is purpose-built to be used with Pro branded LED lights, it keeps the control and light source within a single product family, which simplifies selection when aiming for predictable performance from job to job. The 60W rating on a 12VDC system provides a fixed maximum load, giving a clear boundary when grouping fixtures so brightness changes respond uniformly across the connected lights. Round touch activation means there is a single defined touch zone, reducing ambiguity about where to operate the control for occupants using the space. The ETL Listing indicates the dimmer has been evaluated against established safety criteria, which supports long-term confidence when this component is installed inside cabinets, displays, or other enclosed wood structures that may see frequent use.
The R152 60W round touch dimmer is used to dim Pro branded LED lights, so it fits directly into lighting layouts based on that specific LED product family.
The dimmer is rated for 60W at 12VDC, so LED runs should be planned so the connected load remains within that wattage on a low-voltage circuit.
The dimmer uses Touch On/Off operation, so the user taps the round nickel control surface to switch compatible Pro branded LED lights on or off.
The dimmer offers 0-100% dimming control, which allows continuous adjustment from full brightness down to very low light levels on the connected Pro branded LED lights.
The dimmer requires a 17/32 inch bore hole diameter, so drilling that size provides the opening for the round body and touch surface to seat properly.
The dimmer is ETL Listed, meaning it has been evaluated to a recognized safety standard, which supports confidence when integrating it into 12VDC LED lighting projects.
The R152 60W round touch dimmer brings Touch On/Off and 0-100% dimming control to Pro branded LED lights, which keeps control and light source within one coordinated system. Its 12VDC, 60W rating, 2-3/8 inch length, and 17/32 inch bore hole diameter define clear installation parameters for cabinetry, displays, or furniture projects. The nickel round touch surface and ETL Listing support both appearance and safety expectations in finished work. When a low-voltage Pro LED layout calls for compact, touch-based dimming with defined load and mounting dimensions, this Pro Value Series dimmer aligns with those project requirements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SZL-PKSMR-NI-1 Mfr# L-PKSMR-NI-1 | R110 Surface Mount Ring for Puck LED Light, Nickel |