Door Sensor Switch 60 Watts is an LED lighting accessory from the Pro Value Series that controls Pro branded LED lights based on door movement, so lighting responds automatically when the door opens or closes. This round door sensor operates on 12VDC with a 60 watt rating, so it handles typical low-voltage LED loads used in cabinets or casework. The sensor turns Pro branded LED lights on when the door is opened and off when the door is closed, so light usage follows the door position without separate switches in the layout. A 2 inch range lets the sensor read the door position without direct contact, which supports consistent switching as the door moves through a normal swing. The unit has a nickel finish, which integrates visually with common nickel-toned cabinet components in many woodworking projects. ETL listing provides documented testing against recognized safety standards for this type of low-voltage lighting control.
The door sensor requires a 17/32 inch bore hole diameter, so installations are planned around that hole size in cabinet panels or similar substrates. The sensor body length is 2-3/8 inches, which affects how deep the hole extends into the material and how the sensor sits relative to the door edge. This round configuration supports a centered mounting point, so the sensing area can be positioned to work within the specified 2 inch range as the door moves. As an LED Lighting Accessories component, it is intended to work within Pro branded LED layouts, so planning centers on locating the sensor along the same runs that serve those fixtures. ETL listing applies to the device, which reflects laboratory evaluation of this low-voltage sensor switch for lighting use.
This 12VDC 60W round door sensor switch is specified for use with Pro branded LED lights, so it fits projects built around that lighting family in cabinets, closets, or similar enclosures. The 2 inch range allows the sensor to read door position in areas where the door face approaches the cabinet interior within that distance, so designers can place it near side panels or tops where the door passes closely. The 17/32 inch bore hole diameter establishes how it mounts into wood or board materials, so layouts can use standard boring operations suited to that diameter. With a length of 2-3/8 inches, the sensor occupies a defined space inside the panel, which matters when routing wiring paths or coordinating with adjacent hardware. Its nickel finish coordinates with other nickel-tone elements commonly used in woodworking projects, so the visible sensor edge can integrate with surrounding components.
The defined 60 watt rating at 12VDC gives a clear electrical limit for the loads this sensor switch controls, which helps keep Pro branded LED runs within a range suited to this component. The designed behavior of turning Pro branded LED lights on when the door is opened and off when the door is closed gives predictable performance every time the door moves, so the lighting pattern remains consistent over repeated use. The 2 inch sensing range allows some dimensional tolerance in door clearances, helping projects accommodate normal variations in hinges and reveals while still triggering the sensor. The 17/32 inch bore requirement makes the installation geometry repeatable, since using the same diameter and the 2-3/8 inch length positions the sensor consistently across multiple cabinets. As an ETL listed LED Lighting Accessories product, this door sensor has been evaluated to recognized safety criteria, which supports long-term use in low-voltage lighting applications.
The door sensor switch is used to turn Pro branded LED lights on and off, so it functions specifically within Pro branded LED lighting setups.
The door sensor switch turns Pro branded LED lights on when the door is opened and turns them off when the door is closed, so light operation follows door position.
The door sensor switch is specified at 60 watts and operates on 12VDC, which matches low-voltage Pro branded LED lighting runs within that wattage limit.
The round door sensor switch requires a 17/32 inch bore hole diameter and has a 2-3/8 inch length, which sets the drilling depth and diameter for mounting.
The door sensor switch operates with a 2 inch range, so it detects door position within that distance as the door moves through its swing.
The device is an LED Lighting Accessories product in the Pro Value Series and is ETL listed, so it is suited to low-voltage Pro branded LED applications.
This 12VDC 60W round door sensor switch from the Pro Value Series combines defined electrical capacity, a 2 inch sensing range, and a 17/32 inch bore requirement to support consistent mounting and control of Pro branded LED lights. The 2-3/8 inch length and nickel finish help it integrate into typical cabinet or enclosure layouts where Pro branded LEDs are used. For projects that need automatic on/off response based on door movement within a low-voltage Pro lighting system, this ETL listed LED Lighting Accessories component provides a focused solution.
Sold In: 1 Each