Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
R159 extension cord 10 inch is a dedicated low voltage connector used to extend the wires on Pro branded LED lights, power supplies, lead cords, and switches, so components can be positioned where they work best in a cabinet or display run. The Pro Value Series branding identifies this cord as part of the same family as the lighting components it connects, which helps maintain a matched system when laying out LED runs. The manufacturer part number L-EXTCON-10IN-1 ties directly to this 10 inch length, simplifying reorders when repeating a proven layout. A stated low voltage wire hole size of 13mm, or 1/2 inch, defines the opening this cord is intended to pass through, so drilling or boring can be planned around that dimension in woodwork. As part of the Lighting Connectors and Connecting Cables category, this cord serves as the link that bridges fixed distances between Pro branded LED elements.
This Pro Value Series extension cord is specified as 10 inches long, which defines the fixed distance it can bridge between Pro branded LED lights, power supplies, lead cords, and switches, helping lay out components with predictable spacing. The cord is identified as low voltage, so it is suited to the same low voltage LED lighting circuits described in the product data, aligning its use with typical cabinet and display lighting layouts. With a low voltage wire hole size of 13mm, or 1/2 inch, stated for the cord, drill bit and boring tool selection can be matched to that dimension when routing the cord through cabinet sides, backs, or partitions. Being part of the Lighting Connectors and Connecting Cables class, this cord functions as a purpose-made link between Pro branded elements rather than a general household cable.
The product description states that this 10 inch extension cord is used to extend the wires on Pro branded LED lights, which positions it directly between fixtures in Pro lighting runs where a small gap must be spanned. It is also specified for use with Pro branded power supplies, so it can sit on the low voltage side of the supply to carry power from the supply location to the first or next Pro LED component in the chain. The same description confirms use with Pro branded lead cords, placing this extension between the lead and downstream elements to reach around cabinet dividers or structural obstacles. Use with Pro branded switches is also defined, which means the cord can connect to the switch wiring to position controls at user-friendly locations while keeping the rest of the circuit aligned with the Pro layout.
The explicit 10 inch length called out in the product name defines a short, controlled span between components, which is useful when lights, power supplies, lead cords, and switches in the Pro branded system are only slightly separated. By knowing that this extension cord uses a low voltage wire hole size of 13mm, or 1/2 inch, installers can base drilling patterns on that dimension so each cord path is consistent from cabinet to cabinet. The stated use with Pro branded LED lights, power supplies, lead cords, and switches means each of those components can be placed with the expectation that this 10 inch cord can bridge an intermediate distance without altering the wiring style of the Pro system. As part of the Lighting Connectors and Connecting Cables category, the cord is intended to sit in service runs, such as behind cabinet backs or within partitions, where a defined length and known hole size help create repeatable layouts.
The R159 extension cord 10 inch is used to extend the wires on Pro branded LED lights, power supplies, lead cords, and switches, allowing those components to be spaced as required in a low voltage layout.
The Pro Value Series extension cord identified as L-EXTCON-10IN-1 is 10 inches long, which helps bridge short gaps between Pro branded LED lights, power supplies, lead cords, and switches in a controlled way.
This extension cord is used to extend the wires on Pro branded LED lights, power supplies, lead cords, and switches, linking these parts together where added distance is required in the low voltage wiring path.
The extension cord uses a low voltage wire hole size of 13mm, or 1/2 inch, which sets the drilling diameter needed when routing the cord through cabinet or panel surfaces.
The 10 inch length allows this cord to cover short distances between Pro branded components, supporting neat routing where only a small offset between lights, power supplies, or switches is required.
This Pro extension cord is in the Lighting Connectors and Connecting Cables category, indicating it is designed specifically to link low voltage Pro branded lighting components.
The R159 extension cord, 10 inch, from the Pro Value Series is specified to extend wires on Pro branded LED lights, power supplies, lead cords, and switches, so one cord type can handle several roles in a coordinated layout. Its 10 inch length and 13mm, or 1/2 inch, low voltage wire hole size give fixed values to work from when planning cabinet or display routing paths. With manufacturer part number L-EXTCON-10IN-1 and placement in the Lighting Connectors and Connecting Cables class, this cord provides a consistent way to bridge short gaps in Pro low voltage lighting runs.
Sold In: 1 Each