Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
R162 extension cord 72 inch is a Pro Value Series low voltage connector designed to extend the wires on Pro branded LED lights, power supplies, lead cords, and switches. This dedicated extension cord lengthens the reach between LED components, which helps when fixtures or power supplies land farther apart on a job. As part of the Lighting Connectors and Connecting Cables category, it supports clean routing of low voltage wiring in cabinetry or other built-ins. The cord is identified by manufacturer part number L-EXTCON-72IN-1, giving installers a clear reference when matching components on repeat projects. A specified low voltage wire hole size of 13mm (1/2 inch) guides drilling for pass-throughs, so holes line up with the cord diameter for a neater install. This combination of defined length, application, and hole size supports predictable layouts and consistent results.
The extension cord is specified as low voltage, so it is intended for low voltage LED lighting circuits rather than household mains wiring. A defined low voltage wire hole size of 13mm, noted as 1/2 inch, sets a clear drilling dimension when routing the cord through cabinet panels or other surfaces. Using the 13mm (1/2 inch) hole size helps the cord pass through without excess play, which supports tidy cable management around LED lights, power supplies, lead cords, and switches. The 72 inch overall length gives a predictable span for planning distances between components, which supports straightforward layout during installation and later adjustments or changes.
This extension cord is used to extend the wires on Pro branded LED lights, placing it directly between lighting fixtures and the rest of the low voltage system. Because it is also specified for Pro branded power supplies, the cord can connect those supplies to remote LED runs when supplies are mounted away from the visible area. Its use with lead cords lets it sit between main feeds and branch runs, which is common in cabinet lighting where several sections share one power source. The stated role with switches positions the cord between low voltage controls and the lights they operate, supporting flexible switch location in cabinetry, casework, or similar installations.
As a Pro Value Series product in the Lighting Connectors and Connecting Cables class, the cord is part of a matched group of components intended to work within Pro branded LED lighting layouts. The 72 inch length provides enough distance to cross typical cabinet bays or move from an upper cabinet interior down to a lower area, giving designers and installers additional routing options. Since the cord is identified specifically as an extension element within these systems, it helps maintain consistent connection types from power supplies through lead cords and out to the LED lights and switches.
The specified low voltage wire hole size of 13mm, or 1/2 inch, directly supports layout and drilling steps before pulling any wire. When that dimension is applied across a run, each pass-through point is sized to the same standard, so the extension cord seats similar at every cabinet or panel. This consistent fit helps cords sit cleanly without excessive slack around openings, which matters when routing near finished surfaces in visible installations.
Using the manufacturer part number L-EXTCON-72IN-1 during planning or ordering ties the physical cord on site to its documented role of extending wires on Pro branded LED lights, power supplies, lead cords, and switches. Referencing that part number supports accurate reorders on future projects where the same layout needs to be repeated. The defined 72 inch length also makes it easier to count how many segments are needed to cover a given distance, which can simplify estimating cord runs and organizing connection points within a larger low voltage lighting system.
The R162 extension cord 72 inch is used to extend the wires on Pro branded LED lights, power supplies, lead cords, and switches, which lets components be spaced farther apart while staying connected.
The Pro Value Series cord is described as a low voltage extension used with Pro branded LED lights, power supplies, lead cords, and switches, so it is intended for low voltage LED lighting circuits.
The L-EXTCON-72IN-1 extension cord is 72 inches long, which provides a defined span for bridging gaps between Pro branded LED lights, power supplies, lead cords, and switches in an installation.
The extension cord specifies a low voltage wire hole size of 13mm, noted as 1/2 inch, which guides drilling openings for passing the cord through cabinet or panel surfaces.
The cord is used wherever wires need extending between Pro branded LED lights, power supplies, lead cords, and switches, placing it within the low voltage connection path across the system.
This product is in the Lighting Connectors and Connecting Cables class and carries manufacturer part number L-EXTCON-72IN-1, which helps identify it when specifying or reordering.
The R162 extension cord, 72 inch length, is defined for extending wires on Pro branded LED lights, power supplies, lead cords, and switches, so it directly supports low voltage layouts using that family of components. Its classification under Lighting Connectors and Connecting Cables and the stated low voltage wire hole size of 13mm (1/2 inch) provide clear planning details for cabinet or casework lighting runs. When that combination of length, application, and hole size aligns with the layout being built, this cord can be chosen as a matching connection solution within Pro branded LED installations.
Sold In: 1 Each