Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune ESR-3813-20 is a 20 inch, full-extension, side-mount ball-bearing drawer slide made from 304 stainless steel, designed for food-service kitchens, marine cabinetry, labs, healthcare carts, and any application where moisture or cleaning chemicals would corrode a standard plated slide. Sold per pair.
Standard zinc-plated ball-bearing slides work fine in dry cabinet interiors, but they are not built for environments that see regular moisture, steam, cleaning chemicals, or salt air. The ESR-3813-20 is the right choice when the drawer is inside a commercial kitchen prep station, a marine galley, a laboratory bench, a hospital or clinic cart, or any outdoor or coastal cabinet where plated steel would rust in short order. The hold-in anti-rebound detent adds a practical benefit in these same environments: drawers in mobile equipment, workcarts, and galley cabinets need to stay closed when the unit is in motion or subject to vibration, without requiring a locking mechanism.
The slide members are made from 304 stainless steel, the alloy chosen for food-service and light-marine applications for its corrosion resistance against water, cleaning agents, and mild chemical exposure. The stainless finish is the material itself, not a plating over a steel base, so there is no coating to chip, flake, or undercut over time. For continuous saltwater immersion or aggressive marine environments, confirm whether 304 or 316 stainless is the appropriate grade for your specific application; this slide is sourced and specified as 304.
This slide suits fabricators, installers, and designers specifying cabinetry for commercial kitchens, healthcare facilities, marine interiors, labs, or any industrial setting that combines heavy washdown requirements with the need for reliable drawer movement. At 73 lb per pair and 20 inches in length, it handles the kind of loaded utility drawer found in prep stations and equipment carts without hesitation. Shops building or retrofitting cabinets in dry indoor settings will find that standard zinc-finished slides serve those applications at a lower price point; specify the ESR-3813-20 where corrosion resistance is the deciding factor.
No. The hold-in anti-rebound detent is a mechanical catch that keeps the drawer in the closed position and stops it from rebounding after being pushed shut. It does not damp the closing motion. There is no soft-close mechanism on this slide.
Standard side-mount ball-bearing slides typically require 1/2 inch of clearance per side. Confirm the exact clearance requirement for the ESR-3813 series against Sugatsune's published installation specifications before building the drawer box.
The 73 lb weight capacity is the rating for the pair as listed. Do not double it by counting each slide separately.
Side-mount slides in face-frame cabinets typically need rear mounting brackets or sockets to support the back end of the slide, since the cabinet side is set back from the face frame. Rear brackets for this series are sold separately; confirm compatibility with Sugatsune's ESR-3813 accessory range.
Yes. This slide is sold per pair, as noted in the SAP specification, so one order gives you both the left and right members needed for one drawer.
When the cabinet is going somewhere moisture, chemicals, or coastal air will find it, the ESR-3813-20 keeps the drawer running long after a plated slide would have given out — full extension, smooth action, and a hold-in detent that keeps things where they belong.