Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Granat 5 inch 500 grit sanding discs use a hardened aluminum oxide abrasive on a paper backed disc, giving a fine cutting surface that supports controlled finishing work where a uniform scratch pattern matters. The discs use a hook and loop backing, so they attach to compatible hook and loop sanding pads quickly, which helps with fast changes between grits during multi-step sanding processes. A 9-hole pattern is built into each disc, matching dust-extraction style sanders that use a similar hole layout and helping dust move off the surface as you sand. The Granat abrasive line is described as most long-lasting and highest performing within the Festool range, which supports extended sanding time before discs are changed. These discs are specified at 500 grit, so they fit into fine sanding stages on jobs that move from stock leveling through to pre-finish surface preparation.
The hook and loop backing on these Festool Granat discs lets the disc attach directly to a hook and loop compatible pad, so installation is a press-on step that speeds disc swaps during staged sanding. The 5 inch diameter is specified, which aligns with common 5 inch random-orbit style sanders that rely on this disc size for full pad coverage. A 9-hole pattern is built into each disc, so when matched to a sander with a similar 9-hole pad, the holes sit over the pad ports and help dust extraction pull abrasive dust away from the work area. This layout supports clearer visibility of the surface during sanding and helps the abrasive stay cutting longer because the face is less likely to load with debris.
Festool Granat sanding discs are described as well suited for bare wood, so they fit cabinet, furniture, and millwork operations where wood surfaces move through several sanding stages before finishing. The same abrasive line is noted as suitable for paints and most modern paint systems, which ties the discs to refinishing and finishing workflows where previously coated surfaces need controlled leveling. VOC clear coats are listed among the supported materials, so the discs can be used in systems that rely on low-solvent coatings where surface preparation must stay within a defined scratch profile. The stated suitability for plastic materials and acrylics means these discs also see use on components such as acrylic panels or plastic trim pieces that require careful surface refinement. Solid surface materials and composites are also referenced, connecting the discs to shop tasks like smoothing countertop edges or composite panels where a fine grit is needed for the last passes before polishing or topcoating.
The Granat line is described as Festool's most long-lasting and highest performing abrasive, so the hardened aluminum oxide, synthetic resin bond, and closed coated design are set up to hold cut across extended sanding runs. Hardened aluminum oxide abrasive resists breaking down quickly, which supports a more consistent scratch from the start of the disc's use through its working life, reducing variability between early and late passes on the same surface. Synthetic resin bonding is identified in the construction, giving the grit a secure hold to the paper backing so abrasive grains stay anchored under heat and friction, which matters during continuous sanding on dense coatings or composites. Closed coated coverage means the abrasive surface is densely filled with grit, so more cutting points contact the work at a time, which helps maintain steady material removal and a predictable finish at 500 grit. Together, these construction details support repeatable outcomes across bare wood, paints, VOC clear coats, plastic, solid surface, acrylics, and composites when the discs are used within their fine-grit role.
Festool Granat 5 inch 500 grit sanding discs use hardened aluminum oxide, so the cutting surface is designed to stay sharp longer during extended sanding passes on various materials.
The 5 inch, 9-hole design matches 5 inch, 9-hole sanding pads, so the disc supports dust extraction through the pad ports, helping keep the surface cleaner while you sand.
The P500 grit rating places these discs in the fine sanding range, fitting tasks like final bare wood smoothing or refining between coatings where a tight scratch pattern is needed.
Festool Granat sanding discs are described as well suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic, solid surface materials, acrylics, and composites.
The closed coated construction means the abrasive surface is densely covered with grit, so more cutting points contact the material and support efficient cutting for this fine grit level.
The 497178 part number identifies this specific Festool Granat 5 inch P500, 9-hole, hook and loop sanding disc configuration, which helps match it precisely when reordering for repeat jobs.
Festool Granat 5 inch 500 grit sanding discs combine hardened aluminum oxide, synthetic resin bonding, and a closed coated face to support consistent fine sanding across bare wood, coatings, plastics, solid surface, acrylics, and composites. The hook and loop backing and 9-hole layout work with compatible 5 inch pads to support quick disc changes and dust extraction, which suits production shops and serious DIY users running multi-step finishing systems. For jobs that demand a defined fine-grit scratch pattern with repeatable performance, this Granat configuration offers a focused option within the Festool abrasive system.