Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Carolyne satin nickel pull gives cabinets a defined 5-1/16 inch (128 mm) center-to-center grip, which sets consistent spacing for drilling and layout on doors or drawers. The zinc die-cast construction creates a solid-feeling handle, which supports confident use on frequently opened cabinets. A satin nickel finish provides a muted metallic surface, which helps the pull sit cleanly alongside many hinge and fixture finishes in the same tone. The Carolyne collection beaded accents add detailed edging, which brings a finished look to face frames without relying on extra trim pieces. At 6-13/16 inches (173 mm) overall length, this pull spans wider rail sections, which helps visually balance medium-width drawers and doors. The Amerock Corporation BP36585G10 part number ties this pull to its specific size and finish, which simplifies reorders or matching across a project.
The 128 mm center-to-center mounting on the Amerock BP36585G10 defines the exact distance between screw holes, which aligns with standard metric drilling patterns for many cabinet layouts. A 1-1/4 inch (32 mm) projection sets the pull off the face, which keeps fingers away from door and drawer edges as they operate. The 11/16 inch (17 mm) width and matching 11/16 inch base width keep the pull narrow across the rail, which is useful on slimmer stiles where wider hardware could crowd edges. Each 1-1/8 inch (29 mm) base length at the feet covers a modest area around the screws, which helps visually finish the installation on painted or stained faces.
The Amerock Carolyne series 5-1/16 inch (128 mm) center-to-center satin nickel pull fits projects that follow the Carolyne collection aesthetic, which keeps decorative hardware styling consistent across a job. The beaded accents along the pull body reference 1920s-inspired detailing, which adds visual interest on flat and shaker cabinet fronts without additional profiling. With 6-13/16 inches (173 mm) overall length, this pull suits many base cabinet doors and medium-width drawers, which helps keep scale proportional across common kitchen and bath layouts. The satin nickel finish matches the specified finish name for this product, which supports use alongside satin nickel hinges, latches, and other decorative hardware in the same space. As a member of the Decorative Hardware & Moldings handles and pulls category at Wurth Baer Supply, this piece occupies the role of primary operational hardware, which positions it for everyday opening and closing tasks on residential or commercial cabinetry.
The 128 mm center-to-center rating on the BP36585G10 pull standardizes drilling distances, which helps installers run a single jig setting along a bank of doors or drawers. The 1-1/4 inch (32 mm) projection defines how far the grip stands off the face, which supports consistent shadow lines when multiple pulls are viewed across a cabinet wall. Width at 11/16 inch (17 mm) and base dimensions of 1-1/8 inch (29 mm) by 11/16 inch (17 mm) keep the footprint predictable, which aids in aligning the pulls with stile edges and panel reveals. The zinc die-cast material forms a uniform casting, which supports even contours around the Carolyne collection beaded details from pull to pull. The Amerock Corporation BP36585G10 designation identifies this exact combination of size, material, and satin nickel finish, which helps installers and shops match replacements or additional units to existing layouts without dimension changes.
The Amerock Carolyne satin nickel pull has a 5-1/16 inch (128 mm) center-to-center dimension, which sets the screw hole spacing for drilling cabinet doors and drawers.
The BP36585G10 pull measures 6-13/16 inches (173 mm) in overall length, which helps it visually suit medium-width cabinet doors and drawers.
The Amerock Carolyne pull projects 1-1/4 inches (32 mm) from the cabinet surface, which provides finger clearance for gripping and operation.
The Amerock Carolyne satin nickel pull is made from zinc die-cast material, which creates a solid, rigid handle body for repeated cabinet use.
Each base on the BP36585G10 pull measures 1-1/8 inches (29 mm) long by 11/16 inch (17 mm) wide, which defines the contact area on the cabinet surface.
The BP36585G10 Amerock pull uses a satin nickel finish, which coordinates with other satin nickel decorative cabinet hardware.
The Amerock Carolyne satin nickel pull with 5-1/16 inch (128 mm) center-to-center spacing, 6-13/16 inch (173 mm) overall length, and 1-1/4 inch (32 mm) projection gives cabinet projects a defined, repeatable layout dimension. The zinc die-cast construction and Carolyne collection detailing provide a consistent look across multiple doors and drawers using the same BP36585G10 part. When a job calls for satin nickel decorative hardware in the handles and pulls class, this pull from Wurth Baer Supply aligns sizing, finish, and styling into one specified component ready for cabinet and drawer fronts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AMTMP-MULTI Mfr# TMPMULTI | Door/Drawer Hardware Installation Template |