Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep 6 inch 2000 grit sanding disc identifies this SurfPrep abrasive disc as a fine 2000 grit option on a 6 inch diameter, so it suits tasks that call for a very smooth, controlled cut on prepared surfaces. The disc is built on a film backing, which supports the abrasive layer in staying flat under pressure, helping the surface track more consistently during sanding passes. A no hole design gives uninterrupted contact across the full disc area, which matters when a uniform scratch pattern is preferred over dust evacuation through holes. The abrasive is silicon carbide, so the cutting minerals are bonded specifically for use as an abrasive disc within the SurfPrep product line. As part of the Abrasive Discs category, this disc fits workflows that depend on repeatable sanding steps rather than heavy stock removal in early stages. The blue color visually identifies this specific SurfPrep film-backed 2000 grit disc.
This SurfPrep 6 inch 2000 grit sanding disc is classified as an Abrasive Disc, so it is intended to operate as the sanding interface within an abrasive disc workflow. The flat film backing supports contact between the abrasive layer and the tool pad, helping the disc lie evenly during use. A no hole configuration means there are no perforations in the abrasive area, so the operator works with a fully covered sanding face sized to 6 inches. Because the disc is defined as 2000 grit, it fits sanding stages where a fine finish is needed instead of aggressive stock removal. The silicon carbide specification identifies the abrasive mineral bonded to the film, so users who standardize on this SurfPrep material can match discs by part number SPSN6-2000-25.
This SurfPrep silicon carbide sanding disc belongs to the Abrasives and Abrasive Discs category, so it serves as a sanding step wherever abrasive discs are specified. The 6 inch diameter defines the pad size it is intended to match, guiding selection for sanders set up around this dimension. A 2000 grit rating positions the disc toward fine surface preparation stages, supporting workflows that progress from coarser abrasives to a refined scratch pattern. The film backing under the abrasive layer provides a stable base, helping the disc maintain contact on flat or gently contoured surfaces. Because the disc uses silicon carbide on film, it aligns with SurfPrep systems that call for this specific abrasive type and backing combination. The blue color further distinguishes this disc in shops that stock multiple SurfPrep abrasive options.
The no hole design on this SurfPrep film sanding disc keeps the abrasive surface unbroken, so every section of the 6 inch face contributes to the sanding pattern. This uninterrupted surface helps operators create a more even scratch field when following a defined sanding sequence. The film backing supports the silicon carbide abrasive in staying flat as pressure is applied, which can reduce tracking inconsistencies across the work area. With a clearly defined 2000 grit, users can repeat finishing steps by ordering the same SPSN6-2000-25 part number, aligning results from project to project. Being part of Wurth Baer Supply's Abrasive Discs class also simplifies integrating this disc into established abrasive assortments that rely on documented grits and sizes. Overall, the combination of film backing, silicon carbide abrasive, 6 inch diameter, and 2000 grit provides a predictable disc choice within the SurfPrep line.
This SurfPrep disc uses silicon carbide as the abrasive material, so it delivers the cutting action defined for silicon carbide within the SurfPrep abrasive disc family.
The SurfPrep SPSN6-2000-25 disc is specified as a 6 inch sanding disc, so it is sized to match 6 inch abrasive disc applications in your sanding process.
The 2000 grit rating defines this disc as a fine abrasive, positioning it for sanding stages where a smooth, refined surface profile is required.
The no hole design keeps the abrasive surface continuous across the disc, supporting even contact when a uniform scratch pattern is a priority in the workflow.
This SurfPrep 6 inch 2000 grit sanding disc is built on a film backing, which supports a flat sanding face for consistent tracking across the workpiece.
The disc is identified by the SurfPrep SPSN6-2000-25 manufacturer part number and 6 inch 2000 grit description, simplifying repeat ordering from Wurth Baer Supply.
The SurfPrep 6 inch 2000 grit sanding disc on film with silicon carbide abrasive is configured for fine abrasive disc work where a controlled scratch pattern matters. Its no hole layout, film backing, and defined 6 inch size give a clear, repeatable choice for workflows that rely on documented grits and standard diameters. When a SurfPrep silicon carbide abrasive disc in 2000 grit is needed within the Abrasive Discs category, this SPSN6-2000-25 part provides a clearly specified option ready to slot into established sanding sequences.
Sold In: 25 Each