Edgebanding Stone 1mm Thick x 15/16" Width

Edgebanding Stone 1mm For Clean Panel Edges

Edgebanding Stone 1mm Thick x 15/16" Width provides a dedicated edge finish for panels that need a stone-tone look along exposed sides. The 1mm thickness gives a defined edge profile that covers raw board edges, helping create a consistent surfaced appearance from face to edge on cabinetry and casework. The 15/16 inch width is sized to span typical panel thicknesses in woodworking, so the banding can cover the full edge with enough margin for trimming to a precise flush fit. As a PVC edge banding product, it fits squarely within edgebanding and surfacing workflows where uniform material type across a project simplifies setup. Manufactured by Cleaf S.P.A., the banding follows an established edge banding format, which supports repeatable fabrication steps in shops that already work with PVC edgebanding rolls.

Key Stone PVC Edgebanding Work Advantages

• The 1mm thickness gives the edge banding enough body to form a visible, finished edge profile that hides substrate variations, which helps produce consistent lines after trimming and flushing operations on cabinets and furniture panels.
• The 15/16 inch width is dimensioned to cover common panel edges used in woodworking, providing slight overhang on both sides so installers can trim back to a clean, square edge without exposing the core material.
• The stone description identifies the visual tone of this PVC edge banding, allowing its appearance to coordinate with stone-look surfacing designs so front edges present a continuous finish in the overall project.
• The PVC material classification places this product within standard edge banding and surfacing practices, making it suitable for workflows that rely on PVC banding behavior during bonding, trimming, and finishing steps.
• The 23 mm reference in the SAP description aligns with the 15/16 inch width, so metric-based shops and inch-based shops can reference the same roll size accurately when planning material usage and cut lists.

Stone PVC Edge Banding Fit And Application

This edge banding is defined as 1mm thick, which suits applications where installers want a crisp edge without the bulk of thicker bands, supporting accurate trimming and a refined profile. The 15/16 inch, or 23 mm, width is intended to span the edge of standard panel constructions, giving enough width for slight overhang on both faces so trimming tools can work against a stable margin. As an edge banding and surfacing category product, it fits directly into panel finishing steps where raw core edges must be covered with a matching or coordinating surface material. The PVC classification means it aligns with typical edgebanding handling methods, so fabricators can plan their workflow around familiar trimming and finishing sequences using this roll format.

Using Cleaf Stone Edge Banding In Projects

Where This Stone Edge Banding Works Best

This Cleaf S.P.A. edge banding is positioned in the edgebanding and surfacing category, so it serves projects where exposed panel edges need a coordinated finish with the surrounding surfaces. The stone descriptor identifies a specific design tone, making it suitable when panel faces or design schemes use stone-oriented looks and the edges must visually match that intent. With a 1mm thickness, the banding suits cabinetry, furniture, and casework where a defined but not overly heavy edge is preferred, supporting neat intersections at corners and door fronts. The 15/16 inch, or 23 mm, width is chosen to accommodate standard sheet stock edge dimensions, giving enough coverage for precise trimming after bonding operations on straight or simple contoured edges. Because it is classified as PVC edge banding, it fits into environments where fabricators already rely on PVC materials for other edging tasks, supporting consistent visual and handling characteristics across multiple components.

Details That Support Accurate Edge Finishing

The defined 1mm thickness provides a predictable edge material layer, which helps installers set trimming equipment and finishing techniques to achieve uniform reveals along long runs of cabinets or shelving. The 15/16 inch width allows a modest overhang beyond the panel faces before trimming, so straight-line and handheld trimmers can work without risking exposure of the substrate, improving the final edge quality. The identification as stone edgebanding in the SAP description and web description signals a distinct visual style within PVC options, so planners can specify this roll when drawings or cut lists call for a stone-oriented edge detail. The manufacturer part number UA91PRIMOFIORE23MM uniquely identifies this exact 23 mm, 1mm-thick stone edge banding, which helps shops reorder the same material for repairs, additions, or matching future runs. Positioned under edge banding and PVC within the broader edgebanding and surfacing category, this product fits into standard panel processing sequences, allowing fabricators to integrate it predictably into cutting, bonding, trimming, and finishing stages.

Common Questions About This Stone Edge Banding

Selecting This Edge Banding For Your Panels

This Cleaf S.P.A. Edgebanding Stone 1mm Thick x 15/16" Width from Wurth Baer Supply brings a defined 1mm PVC edge and a stone-oriented look to panel projects where exposed edges must match design intent. The 23 mm width gives working room for accurate trimming while fully covering standard sheet stock edges. With a dedicated manufacturer part number UA91PRIMOFIORE23MM and clear placement in the edgebanding and surfacing category, it fits straightforwardly into cabinet, furniture, and casework workflows that depend on predictable PVC edge banding performance.