Kreg bench clamp delivers a 3 inch reach that lets you grip material well away from the edge, so you can clamp workpieces in a more useful location on jigs or benchtops. The same clamp also provides a 6 inch reach option, which extends how far you can secure wider panels during building or assembly. This clamp handles materials up to 3-3/4 inches thick at the 3 inch reach and up to 5 inches thick at the 6 inch reach, so one tool can secure a wide range of stock thicknesses in the shop. Automatic adjustment to material thickness keeps setups consistent from part to part, which supports repeatable clamping without dialing in settings for every new piece.
This bench clamp uses an automatic thickness adjustment feature that sets the jaw position as you clamp down, so each squeeze adapts to the actual material rather than relying on preset stops. The thumbscrew on the clamp body fine tunes pressure, which lets you dial in lighter or heavier grip depending on the operation and the material. With a 3 inch reach and capacity up to 3-3/4 inches thick, it supports clamping of common framing, panel, and jig components near the front of a station. The 6 inch reach setting extends that capacity to materials up to 5 inches thick, which helps when you need to secure deeper assemblies or larger panels further from a bench edge.
The KBC3 bench clamp is designed for woodworking setups that use the Kreg Clamp Table, Clamp Trak, Clamp Plate, or Universal Clamp Trak Kits, so it fits naturally into Kreg style clamping stations. When used in these systems, the 3 inch reach allows you to position the clamp close to edges or joints for tasks like drilling or fastening, while still keeping your hands clear of the tool path. The 6 inch reach increases flexibility when working on larger cabinet sides or wide shelves, so you can secure the work closer to the middle of the panel. Capacity up to 3-3/4 inches thick at the shorter reach and up to 5 inches thick at the longer reach means it can hold everything from thinner fixture parts to thicker assembly components in the same setup.
The automatic adjustment to material thickness on this clamp means clamping multiple parts of different thickness in sequence does not require manual refitting, which can reduce the time lost fine tuning between cuts or holes. The thumbscrew control over clamping pressure helps you balance holding power against surface protection, which is important when working on finished or pre-sanded pieces. Large clamp faces distribute force across a broader area, which supports flatter, more stable workpieces during routing, drilling, or sanding operations. Ergonomic padded grips on the handles reduce strain during repeated use, which helps maintain consistent clamping force from the first part of the day to the last. Compatibility with Kreg Clamp Table, Clamp Trak, Clamp Plate, and Universal Clamp Trak Kits lets the same clamp move between stations as needed, which simplifies workholding across different jigs and benches.
The KBC3 bench clamp holds materials up to 3-3/4 inches thick at the 3 inch reach and up to 5 inches thick at the 6 inch reach, so it covers many common woodworking stock sizes.
The automatic thickness adjustment on this bench clamp sets jaw position to the actual workpiece, which lets you move between different material thicknesses without resetting the clamp each time.
The bench clamp uses a simple thumbscrew to regulate clamping pressure, so you can set a lighter or stronger grip to match the material and the operation being done.
Large clamp faces spread pressure more evenly across the workpiece, which supports flat, stable clamping and helps reduce surface marking during woodworking tasks.
The KBC3 bench clamp is compatible with the Kreg Clamp Table, Clamp Trak, Clamp Plate, and Universal Clamp Trak Kits, so it integrates into Kreg based clamping stations.
Ergonomic padded grips on the handles make repeated clamping more comfortable, which supports consistent clamping effort across longer woodworking or assembly sessions.
This Kreg bench clamp combines automatic material thickness adjustment with a 3 inch and 6 inch reach range, so it supports varied clamping positions on benches and jigs. Capacity up to 3-3/4 inches and 5 inches thick lets it secure common stock sizes in woodworking, while the thumbscrew pressure control and large clamp faces support stable, surface friendly holding. Compatibility with the Kreg Clamp Table, Clamp Trak, Clamp Plate, and Universal Clamp Trak Kits means it fits directly into existing Kreg clamping layouts, so you can apply the clamp where steady, repeatable workholding is needed.
Sold In: 1 Each