Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
AUTOMAXX bar clamp 8 uses Auto-Adjust Clamping Technology to match material thickness as it tightens, so workpieces are held without manual re-setting between boards during repetitive woodworking or assembly work. The bar-clamp versatility lets this Kreg Tool KSC8 handle a range of wood clamping setups along the bar length, which supports tasks from edge-gluing to holding parts during drilling or fastening. Easy-to-regulate clamping force using a simple thumbscrew lets you dial in pressure on the Kreg bar clamp for delicate panels or heavier stock, which helps control squeeze-out and surface marking on finished pieces. Extra-large clamp faces spread clamping pressure evenly along the contact area, which stabilizes workpieces and helps keep joints aligned while glue cures. Highly durable, all-metal construction keeps this bar clamp working under shop conditions, which supports repeated use in woodworking environments. Ergonomic padded grips prevent hand-fatigue during clamp adjustment, which helps when many clamps are cycled through in a workday.
The Kreg Tool KSC8 uses Auto-Adjust Clamping Technology to automatically match material thickness during tightening, which streamlines initial setup compared to clamps that require manual jaw adjustment for every board. Easy-to-regulate clamping force using a simple thumbscrew provides a single control point for adjustment, so installers can establish a working pressure once and then maintain that setting through multiple glue-ups or assemblies. Extra-large clamp faces spread clamping pressure evenly across contact points, so fewer clamp repositioning steps are needed to cover a joint length. Ergonomic padded grips contribute to a smoother tightening and release action by hand, which is useful when clamps are repeatedly moved during layout, dry-fitting, and final clamping passes.
The AUTOMAXX bar clamp, 8 length, belongs to the Kreg Tools class of woodworking hand clamps, so it fits naturally into wood assembly, repair, and fabrication workflows. Auto-Adjust Clamping Technology that automatically adjusts to material thickness helps when moving between different board widths or panel thicknesses during a single project, because the clamp follows the material without reconfiguring jaw spacing. Extra-large clamp faces on the Kreg bar clamp spread clamping pressure evenly along the surface, which supports edge-gluing boards into wider panels, holding face frames, or stabilizing parts during drilling or fastening. The 550 lb clamping pressure rating gives the clamp the strength to secure joints under significant load, which is valuable when drawing tight fitting parts together during glue-up or when resisting movement on workpieces under drilling forces. Highly durable, all-metal construction supports this role in busy shops, where clamps see frequent cycling and are critical to holding alignment until adhesives cure.
Auto-Adjust Clamping Technology on the Kreg Tool KSC8 automatically tracks material thickness as you close the jaws, which removes a manual adjustment step and gives more consistent engagement on different workpieces along a job run. Easy-to-regulate clamping force using a simple thumbscrew lets you set how firmly the clamp applies its 550 lb clamping pressure capability, so the same setting can be carried across multiple clamps to keep pressure levels uniform on a glue joint. Extra-large clamp faces distribute this pressure over a larger area, which helps limit denting on softer woods and keeps joint lines straight, especially on long edges or panel seams. Ergonomic padded grips reduce strain while applying and releasing pressure, so repeated adjustments stay controlled, which supports precise alignment when fine-tuning fit. The highly durable, all-metal construction keeps these performance characteristics stable over time, which supports predictable clamping behavior from project to project.
The AUTOMAXX bar clamp, 8 length, is used to hold woodworking pieces together along a bar, supporting tasks such as assembly, edge-gluing, and holding parts stable during drilling or fastening.
Auto-Adjust Clamping Technology automatically adjusts to material thickness as the clamp tightens, so it can move between different stock sizes without resetting jaw positions during a workflow.
The Kreg Tool KSC8 uses a simple thumbscrew to regulate clamping force, allowing the user to establish a desired pressure level that can be repeated across similar assemblies.
The AUTOMAXX bar clamp, 8 length, is rated for 550 lb clamping pressure, giving it the strength to draw joints together firmly and resist movement during woodworking operations.
Extra-large clamp faces spread clamping pressure evenly, which helps maintain alignment on joints and reduces concentrated marks on the wood surface during clamping.
The bar clamp has highly durable, all-metal construction for repeated shop use, and ergonomic padded grips that reduce hand-fatigue during frequent tightening and release.
The AUTOMAXX bar clamp, 8 length, from Kreg Tool combines Auto-Adjust Clamping Technology with bar-clamp versatility, which suits woodworking tasks that demand repeated setups on varying material thicknesses. Extra-large clamp faces and a 550 lb clamping pressure rating give this Kreg bar clamp the ability to distribute force while holding joints tight, which is important when assembling panels or frames. Highly durable, all-metal construction and ergonomic padded grips support frequent use in woodworking environments, helping this Kreg Tool KSC8 integrate into everyday clamping workflows. Choose this bar clamp when automatic thickness adjustment and controlled clamping force through a simple thumbscrew are important to keeping jobs moving smoothly.
Sold In: 1 Each