undermount bowl router bit is designed specifically for use in undermount installations of Corian bowl #874-S, so it matches that bowl profile and supports consistent results on that exact job. The bit trims and profiles the counter-top edges after the bowl is mounted, turning a rough cutout into a clean, even transition between bowl and solid surface. The 1-3/4 inch diameter cutting head sweeps a wide path, which helps maintain a smooth, flowing edge around the bowl opening. A 1/2 inch shank provides a solid grip in routers that accept this size, which supports stable cutting around the curve. The 3 inch length gives working reach from the collet to the cutting edge, helping the router stay flat on the top while the profile is cut around the undermount bowl.
This Amana Tool router bit is part of a solid surface tooling range, so its dimensions are tuned for that material in undermount bowl work. The 1/2 inch shank fits routers sized for heavier bits, which supports smoother rotation when running around the bowl perimeter. An overall length of 2-1/2 inches keeps the cutting section close to the collet, helping control vibration while still giving access to the countertop edge. The cutting height of 1 inch works with common solid surface build-ups at the sink opening, so the operator can trim and profile in one guided pass around the Corian bowl.
This undermount bowl router bit is designed specifically for use in undermount installations of Corian bowl #874-S, so it fits directly into jobs using that exact bowl number. By trimming and profiling the counter-top edges after the bowl is mounted, it supports a workflow where the fabricator bonds the bowl first, then cleans the opening to final size and shape. The 1-3/4 inch diameter cutting head covers the solid surface around the rim, which helps create a smooth visual transition at the sink. A 1 inch cutting height lets the bit address the full working thickness at the bowl edge in many Corian layouts. The 10 degree angle forms the wall between top and bowl, producing a measurable, repeatable slope from job to job in the same installation style.
The Ultra-Glide ball bearing guides support the bit by tracking along the Corian, which keeps the cutting edge positioned while the router follows the bowl opening. This guidance helps the operator maintain the same reveal and wall shape all the way around the sink. The 1/2 inch shank connects the tool firmly in compatible routers, which supports smoother running around inside curves. An overall length of 2-1/2 inches positions the cutting head close to the router base, improving control when reaching over the countertop to follow the bowl. Cut depth options of 1/2 inch and 3/4 inch provide flexibility to match different edge treatments in solid surface sinks. As part of Amana Tool solid surface router bits, this undermount bowl bit ties its dimensions, angle, and guide system directly to the needs of Corian bowl undermount work.
The undermount bowl router bit is designed specifically for use in undermount installations of Corian bowl #874-S, so it is intended for Corian solid surface work around that bowl.
The Ultra-Glide ball bearing guides run along the Corian surface, keeping the bit aligned to the bowl opening so the cut profile stays consistent around the sink edge.
The Amana Tool undermount bowl bit has a 1/2 inch shank, which supports a solid grip in routers sized for that shank for stable cutting around the bowl.
The bit provides cut depth options of 1/2 inch and 3/4 inch, which allows selection of a lighter trim or a deeper profile on the solid surface around the bowl.
The router bit has a 10 degree angle, which sets the sloped wall between countertop and Corian bowl to create a consistent transition around the sink.
The bit has a 1-3/4 inch diameter, 1 inch cutting height, 1/2 inch shank, and 2-1/2 inch overall length, dimensions suited to profiling the undermount Corian bowl opening.
The Amana Tool undermount bowl router bit is designed specifically for use in undermount installations of Corian bowl #874-S, tying its profile and guidance to that application. With a 1-3/4 inch diameter, 1 inch cutting height, 10 degree angle, and 1/2 inch shank, it supports trimming and profiling the counter-top edges after the bowl is mounted. For solid surface shops and installers working with this Corian bowl number, these matched dimensions help deliver a consistent edge and transition at the sink. Choose this solid surface undermount installation bit when the job calls for an undermount Corian bowl #874-S installation using defined, repeatable router geometry.