Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Solid surface corner rounding router bit is designed by Amana Tool for shaping 1/2 inch thick solid surface material. This router bit is intended for use on 1/2 inch thick material, so it targets standard solid surface countertop stock and similar workpieces in that thickness range. It puts a 3/8 inch radius round over on the countertop, which creates a consistent, smooth edge profile along exposed runs. The tool diameter is 1-7/8 inch, allowing the cutting edges and guide components to work together to form the specified radius on 1/2 inch material. As a solid surface router bit in the Bits, Blades and Cutters - Solid Surface category, it is configured for common fabrication tasks around solid surface counters.
This Amana Tool solid surface router bit uses a 1/2 inch shank, allowing it to seat in routers that are configured for 1/2 inch shank tooling. The overall length is 2-29/32 inch, so the projection from the collet can be set with that length in mind when arranging fences or guides. The cutting height of 1 inch and radius of 3/8 inch define how deep the bit engages along the countertop edge, helping with setup decisions on how much material to leave before final profiling cuts. The two flutes provide the cutting action, giving a paired-edge geometry for balanced material removal.
This router bit is described as a solid surface corner rounding tool with Ultra-Glide radius bearing, aimed at edge shaping on 1/2 inch thick material. It is intended for use on 1/2 inch thick material, so it matches solid surface sheets and built-up edges in that thickness class. The bit will put a 3/8 inch radius round over on the countertop, which suits front edges and similar exposed areas on solid surface counters. Its category listing as Bits, Blades and Cutters - Solid Surface highlights its focus on solid surface fabrication rather than wood-only work. The tool is for use on Vaso Sink Collection by Dupont, linking it directly to routing tasks around that sink line where solid surface tops are profiled to meet the sink geometry.
The diameter of 1-7/8 inch and cutting height of 1 inch work together with the radius of 3/8 inch to create the intended edge form on 1/2 inch solid surface material. The B1 dimension of 25/32 inch and D1 of 3/4 inch are part of the detailed geometry, supporting matched setups where those dimensions affect how the profile meets adjoining faces. With two flutes, the bit presents a balanced cutting pattern around the 1-7/8 inch diameter, which matters when making continuous passes along countertop runs. As a router bit in Amana Tool part number 57170, it carries a specific identity that allows fabricators to select this geometry again when repeating Vaso Sink Collection or similar 3/8 inch radius countertop edge work.
This tool is intended for use on 1/2 inch thick material, so it is suited to solid surface countertops and similar workpieces made from 1/2 inch solid surface sheets.
The Amana Tool 57170 router bit will put a 3/8 inch radius round over on the countertop, producing a consistent eased edge along exposed solid surface edges.
The solid surface corner rounding router bit is furnished with an Ultra-Glide non-marring Delrin-sleeved ball-bearing guide, which follows the edge while helping protect the surface.
The Amana Tool solid surface router bit uses a 1/2 inch shank, so it fits routers that accept 1/2 inch shank router bits for solid mounting.
The solid surface corner rounding router bit has a 1-7/8 inch diameter, positioning the cutting edges and bearing to generate the 3/8 inch radius on 1/2 inch material.
This router bit is for use on Vaso Sink Collection by Dupont, aligning its 3/8 inch radius and geometry with solid surface countertop work around that sink line.
The solid surface corner rounding router bit from Amana Tool, part number 57170, is built for 1/2 inch thick material, giving a defined 3/8 inch radius round over on countertops. Its Ultra-Glide non-marring Delrin-sleeved ball-bearing guide supports clean contact along solid surface edges while shaping the profile. With a 1/2 inch shank, 1-7/8 inch diameter, and 1 inch cutting height, the bit aligns with typical solid surface routing setups. For work on the Vaso Sink Collection by Dupont and similar 1/2 inch solid surface projects, this router bit matches the specified edge geometry.