Berenson Skyline Series 8-13/16" (224 mm) Center to Center Slate Pull, - 1123-1SLT-P

Berenson Skyline Slate Pull For Cabinet Projects

Berenson Skyline slate pull 224mm gives you a cabinet handle sized for 8-13/16 inch center to center drilling, so it lines up with that hole spacing on doors or drawers and keeps layout straightforward on new or replacement work. The pull belongs to the Skyline collection from Berenson Corporation, which keeps styling consistent across a run of cabinetry when you repeat the same series. Its zinc construction provides a solid metal handle body, giving a firm grip point for regular everyday use. The slate finish defines the surface color and look, which helps coordinate with other slate-toned decorative hardware in the same space. Overall length is 9-1/4 inch, so the handle visually covers more of the drawer or door front, which affects proportion on wider fronts. A projection of 1-1/16 inch sets how far the pull stands off the surface, shaping finger clearance and how easily it can be grasped.

Key Skyline Cabinet Pull Details That Matter

• The 8-13/16 inch center to center dimension sets your drilling pattern, so once holes are laid out to that spacing, the pull fits consistently across multiple fronts.
• The 9-1/4 inch overall length lets the handle span a wider area, which helps visually anchor larger doors or drawers in a run of cabinets.
• The 1-1/16 inch projection defines how far the pull extends from the face, which affects ergonomics when reaching from above or below.
• The 5/8 inch width describes the front-to-back grip surface, giving a predictable feel in hand along the full length of the pull.
• The slate finish sets the color tone of the pull, helping it coordinate with other slate-finished decorative hardware and nearby surfaces.
• The zinc material provides a metal base, supporting a sturdy feel at mounting points when opening and closing cabinetry.

Cabinet Pull Mounting And Fit Details

This Skyline pull is specified at 8-13/16 inch center to center, so hole placement follows that exact spacing when laying out a cabinet door or drawer front. That dimension also matters when swapping from another handle with the same drilling pattern, because the existing holes can be used without altering the front. With an overall length of 9-1/4 inch, the pull extends slightly beyond the hole spread, so its ends cover the area around each mounting point. Projection of 1-1/16 inch determines stand-off from the cabinet face, which affects how fingers slide behind the pull from different approach angles. The 5/8 inch width defines the bar profile that the hand contacts, which influences grip sensation during regular operation.

Using The Berenson Skyline Pull In Work

Where This Skyline Slate Pull Fits Best

The Berenson Skyline Series pull with 8-13/16 inch center to center sizing fits cabinet layouts that are drilled to that pattern on face frames or frameless fronts, so it works in both new installs and straightforward replacements using that spacing. Its 9-1/4 inch length suits medium to wider cabinet doors or larger drawers where more handle span helps balance the front visually. The slate finish ties into other slate-finished decorative hardware and moldings, supporting a coordinated look across a kitchen, bath, or shop cabinet run when the same finish is repeated. Zinc construction provides a metal pull body, which is well suited to everyday opening and closing cycles in residential or light commercial cabinetry. Within the Skyline collection, this pull functions as the longer handle option, giving a designer or installer a defined size choice when planning handle layouts.

Details That Support Consistent Cabinet Results

The precise 8-13/16 inch center to center measurement allows repeatable drilling from cabinet to cabinet, helping maintain straight handle lines along banks of doors and drawers. By matching another pull with the same center to center, this 1123-1SLT-P model maintains alignment on retrofits without reworking the front surface. The projection of 1-1/16 inch creates predictable clearance, so the hand engages the pull the same way across all fronts, supporting consistent user experience. The 5/8 inch width keeps the grip profile uniform, which helps installers and designers anticipate how the pull feels regardless of cabinet location. The slate finish offers a fixed appearance specification, so when multiple pulls are used, their look stays uniform throughout the project. Identifying this handle by manufacturer part number 1123-1SLT-P provides a clear reference point when reordering or matching hardware on future phases.

Common Questions About The Skyline 224mm Pull

Selecting This Skyline Pull For Your Project

The Berenson Skyline slate pull 224mm combines an 8-13/16 inch center to center layout, 9-1/4 inch overall length, and 1-1/16 inch projection, giving you defined drilling and handling geometry for cabinetry. Its zinc construction and 5/8 inch width supply a steady metal grip surface that feels consistent from door to door. The slate finish ties this handle into other slate decorative hardware, supporting a unified look across the installation. With manufacturer part number 1123-1SLT-P identifying this exact model, it is straightforward to specify the same pull across new work and later additions.