Berenson Laura Series 8-13/16" (224 mm) Center to Center Brushed Nickel Pull, - 9813-1BPN-P
Description
Berenson Laura Series Brushed Nickel Pull Details
Berenson Laura Series brushed nickel pull describes a cabinet handle from the Laura 2 collection that uses a brushed nickel finish to give cabinetry a specific visual style while keeping the metal surface low-glare for everyday use in busy spaces. The pull is identified as part number 9813-1BPN-P, so installers can match it precisely across multiple doors or future service work. Its center to center dimension is 8-13/16 inches, or 224 mm, which sets the required hole spacing and keeps mounting layouts consistent across wide drawers or cabinet doors. The overall length of 9-3/4 inches defines how much handle spans across the front, which matters when positioning it relative to panel edges or neighboring hardware. The handle sits out with a projection of 1-3/16 inches, giving clearance for fingers during regular opening and closing. A width of 13/16 inch sets the front profile size, affecting both grip feel and visual proportion.
Key Laura 2 Pull Traits For Cabinet Work
- The pull is part of the Laura 2 collection, which lets installers repeat the same design line across a room for consistent cabinet styling and layout planning.
- The handle uses a brushed nickel finish, giving a muted metallic look that helps it coordinate with other brushed hardware and appliances in a project.
- The material is zinc, so the pull provides a solid metal feel while supporting detailed styling typical of decorative cabinet hardware.
- The center to center measurement is 224 mm (8-13/16 inches), allowing accurate drilling or boring based on a clear metric or imperial reference.
- The overall length of 9-3/4 inches covers more of the drawer or door front, which helps visually balance wider faces in kitchen or bath installations.
- The 1-3/16 inch projection and 13/16 inch width together define the hand clearance and grip area, affecting how comfortably the pull can be grasped.
Mounting Layout And Fit For This Cabinet Pull
The 8-13/16 inch center to center dimension defines the exact spacing between mounting points, guiding hole locations when laying out new cabinet fronts or retrofitting existing pieces. This measurement also matches the 224 mm metric reference, giving flexibility for shops that work from either scale without conversions. The overall 9-3/4 inch length means the pull extends slightly beyond the mounting centers at each end, which matters when aligning it near neighboring pulls or frame edges. Its 1-3/16 inch projection sets how far it stands off the door, creating finger clearance without pushing too far into surrounding walkways. The width of 13/16 inch defines the front face, helping installers understand how it will sit on narrow rails or stile edges.
Using The Laura 2 Pull In Cabinet Projects
Where This Laura 2 Zinc Pull Fits Best
This Berenson Laura Series 8-13/16 inch center to center brushed nickel pull is designed for cabinet and drawer fronts where a longer handle is desired, since its 224 mm mounting span suits wider fronts commonly found on base cabinets and large drawers. Being part of the Laura 2 collection means it carries a coordinated design language, which helps when matching handles across doors, drawers, and other fronts in the same room. The brushed nickel finish provides a subdued metallic tone that aligns with many contemporary or transitional cabinet styles, keeping visual continuity with other brushed fixtures. Because the pull material is zinc, it works well in decorative hardware applications where shaped profiles and defined edges are part of the design intent.
Details That Support Consistent Cabinet Installations
The 224 mm center to center dimension of this 9813-1BPN-P pull lets installers repeat the same drilling pattern across multiple cabinets, reducing layout variation from piece to piece. Using the 8-13/16 inch spacing allows templates or jigs to be built around a fixed standard, which simplifies repetitive shop or on-site work. The 9-3/4 inch overall length gives a predictable overhang beyond the mounting holes at both ends, helping with visual alignment when setting handles a certain distance from panel edges or appliance gaps. The 1-3/16 inch projection supports a consistent stand-off from the door surface, so doors and drawers present the same pull clearance throughout the run. With a width of 13/16 inch, the pull maintains a uniform face dimension, which matters when aligning multiple pulls along narrow rails where crowded hardware could interfere visually.
Common Questions About This Berenson Laura Pull
What cabinets suit the 8-13/16 inch center to center?
The 8-13/16 inch center to center on this pull suits wider cabinet doors or drawers, giving a long gripping area that matches larger fronts and keeps the handle visually in scale.
How does the 9-3/4 inch length affect layout?
The 9-3/4 inch overall length means the pull extends past the mounting holes, affecting how close it can be placed to cabinet edges or adjacent pulls in tight layouts.
What does the 1-3/16 inch projection mean in use?
The 1-3/16 inch projection means the pull stands off the cabinet face enough for fingers to wrap behind it, affecting day-to-day grip comfort on doors and drawers.
Why does the 13/16 inch width matter on narrow rails?
The 13/16 inch width defines how much of a narrow rail or stile the pull covers, which helps plan spacing so handles sit centered without crowding edges.
What role does the zinc material play?
The zinc material allows the pull to deliver a solid metal feel and support its shaped Laura 2 styling, which is useful in decorative cabinet hardware applications.
How does the brushed nickel finish affect appearance?
The brushed nickel finish softens reflected light on the pull, giving cabinets a muted metallic look that coordinates with other brushed fixtures and appliances.
Choose This Pull For 224 Mm Cabinet Layouts
The Berenson Laura Series 8-13/16 inch center to center brushed nickel pull gives cabinet projects a defined 224 mm mounting span, simplifying consistent drilling and layout work across multiple doors and drawers. Its 9-3/4 inch overall length and 13/16 inch width allow predictable visual coverage on wider fronts, while the 1-3/16 inch projection supports everyday grip clearance. With zinc construction and a brushed nickel finish from the Laura 2 collection, this pull ties cabinet faces into a unified look. Select this 9813-1BPN-P handle when a longer, metric-based mounting pattern is part of the project plan.