Berenson Laura Series 6-5/16" (160 mm) Center to Center Polished Chrome Pull, - 9819-1026-P
Description
Berenson Laura Series 160mm Pull For Cabinets
Berenson Laura Series 160mm pull identifies this handle as part of Berenson Corporation's Laura 1 collection, so it brings a consistent design language across matching cabinet hardware runs. The pull is made from zinc, which provides a solid metal feel that suits everyday cabinet use in kitchens, baths, or shop projects. Its polished chrome finish gives a bright, reflective surface that visually ties in with chrome hinges or faucets on the same installation. A 6-5/16 inch, or 160 mm, center to center dimension sets precise hole spacing, which matters when laying out new drill patterns or aligning with existing holes. Overall length of 7-1/4 inches gives generous hand clearance across the front of the cabinet, supporting comfortable gripping on wider drawer fronts. A projection of 1-1/16 inches establishes how far the pull stands off the door or drawer face, which affects sweep clearance past adjacent faces.
Key Details That Support Cabinet Hardware Layout
- The 6-5/16 inch center to center measurement defines exact mounting-hole spacing, helping keep multiple pulls aligned in straight runs across drawers or doors.
- The 7-1/4 inch overall length extends beyond the fastener points, which gives a balanced look on medium to large fronts and aids visual alignment with door or drawer proportions.
- The 1-1/16 inch projection sets a consistent hand clearance from the front surface, which helps fingers wrap the pull without rubbing against the cabinet face.
- The 13/16 inch width establishes the front profile, affecting how the pull reads visually on the door and how it distributes pulling force across the mounting area.
- The polished chrome finish provides a bright metallic surface that coordinates with other polished chrome decorative hardware and trim in the same room.
Mounting Size And Fit For This Cabinet Pull
This pull's 6-5/16 inch center to center dimension controls where mounting holes are drilled, which is important when setting up jigs for repetitive cabinet work. With its 7-1/4 inch length, the pull slightly overhangs the hole spacing on each side, framing the fasteners and giving a finished edge-to-edge appearance on face frames or slab fronts. The 1-1/16 inch projection defines how far it stands off the door, which influences whether doors can swing past adjacent surfaces without contact. A 13/16 inch width determines how much of the rail or stile face the pull covers, which matters when working near narrow frame members or tight reveal details. These measurements together support consistent fitting across a full bank of doors and drawers.
Using This Laura Series Pull In Real Projects
Applications For Berenson Laura Zinc Cabinet Pull
This pull belongs to the Laura 1 collection from Berenson Corporation, placing it in a decorative hardware family used for handles and pulls on cabinets. Its placement within the Decorative Hardware & Moldings and Handles and Pulls category indicates its role as a working cabinet handle rather than a purely ornamental part, so it suits doors and drawers that see regular opening and closing. The zinc material supports use in typical residential or light commercial cabinetry where metal pulls are standard, fitting into woodworking projects supplied by distributors such as Wurth Baer Supply. Because the finish is polished chrome, the pull visually ties into chrome plumbing trim or appliance details, which helps designers and installers maintain one consistent metal tone across a room. The 160 mm center to center spacing aligns with metric-based layouts common in many cabinet lines, which can streamline planning when cabinets follow modular metric dimensions.
Dimensions That Help Maintain Consistent Results
The 6-5/16 inch center to center measurement sets a repeatable mounting standard, so drilling jigs or CNC programs can be used across a whole job without changing hole spacing. Its 7-1/4 inch overall length gives a predictable overhang past each hole, which helps installers line the pull up relative to panel edges or frame intersections. A 1-1/16 inch projection controls how far the hand grip sits off the surface, contributing to consistent ergonomics from cabinet to cabinet on the same wall. The 13/16 inch width defines the visual footprint on the face, which matters when aligning pulls across rails of different heights. The Laura 1 collection designation connects this pull to matching Berenson pieces, so hardware across doors, drawers, and other fronts can share the same profile for uniform appearance. The manufacturer part number 9819-1026-P uniquely identifies this model, simplifying reorders or matching during future renovation work.
Common Questions About This Berenson Cabinet Pull
What is the center to center size on this pull?
The Berenson Laura Series 160mm pull has a 6-5/16 inch, or 160 mm, center to center measurement, which defines the exact spacing for drilling the two mounting holes.
How long is the Berenson 9819-1026-P pull overall?
The 9819-1026-P pull has a 7-1/4 inch overall length, which affects how much of the cabinet front it spans and how it visually fits wider doors or drawers.
What material and finish does this Laura 1 pull use?
This Laura 1 collection pull is made from zinc with a polished chrome finish, giving a solid metal body with a bright reflective surface that coordinates with chrome hardware.
How far does the polished chrome pull project from the cabinet?
The polished chrome pull projects 1-1/16 inches from the cabinet face, which sets hand clearance and influences door swing past adjacent surfaces.
What is the face width of this polished chrome cabinet handle?
The handle has a 13/16 inch width, shaping its front profile and determining how much of the rail or stile surface it visually covers.
How is this pull identified for reordering?
This pull is identified by Berenson Corporation as manufacturer part number 9819-1026-P, which uniquely matches this Laura Series 160mm polished chrome model.
Selecting This Pull For Your Next Cabinet Run
The Berenson Laura Series 160mm pull combines a 6-5/16 inch center to center layout with a 7-1/4 inch overall length, giving clear mounting and proportion guidelines for cabinet projects. Its zinc construction and polished chrome finish provide a defined material and surface choice that matches other chrome elements. With a 1-1/16 inch projection and 13/16 inch width, the pull establishes consistent hand clearance and visual footprint across doors and drawers. When a project calls for a Laura 1 collection profile tied to part number 9819-1026-P, this pull offers a repeatable spec to build into cabinet layouts.