Berenson Laura Series 3-3/4" (95 mm) Center to Center Vintage Nickel Pull, - 9821-1VTN-P

Berenson Laura Series Cabinet Pull For Cabinets

Berenson Laura Series cabinet pull is a zinc handle from the Laura 2 collection in a vintage nickel finish, so it brings a specific style and a consistent line to cabinet and furniture projects. The pull has a 3-3/4 inch (95 mm, 96mm) center to center dimension, which sets the drilling pattern for new work and guides layout when swapping existing handles on doors or drawers. Overall length of 4-7/16 inch gives this pull a balanced footprint across typical cabinet rail widths, which helps align with both narrow and standard face frames. Projection of 1 inch sets how far the pull stands off the front, creating finger clearance while keeping hands close to the work surface. Width of 7/8 inch defines the grasp area, giving a defined edge for opening doors and drawers with a controlled feel.

Key Laura Vintage Nickel Pull Details

• The Laura 2 collection designation ties this pull to a defined Berenson design family, which helps maintain a unified look across multiple cabinet banks in the same room or project run.
• Zinc material construction creates a solid metal pull body, which supports everyday cabinet and drawer use in residential or light commercial woodworking environments.
• Vintage nickel finish on the pull surface establishes the color tone and sheen, helping this handle coordinate with hinges, faucets, and other visible hardware on the same installation.
• Center to center measurement of 3-3/4 inch (95 mm, 96mm) dictates hole spacing, which simplifies layout for new drilling and aligns with many existing cabinet patterns during replacements.
• Overall length of 4-7/16 inch, plus 7/8 inch width, defines the handle footprint, helping installers read how it will sit on narrow drawer fronts versus wider cabinet rails visually and physically.
• Projection of 1 inch determines stand-off from the cabinet face, which affects finger room while keeping the pull close enough to reduce snagging in tight walkways or work areas.

Installation Fit Based On Center To Center

This Berenson Laura Series 9821-1VTN-P pull uses a 3-3/4 inch (95 mm, 96mm) center to center pattern, so hole locations are fixed on both new and replacement work. That measurement syncs with many common cabinet and drawer layouts, which helps when changing hardware without altering the face. Screw size is specified as 8-32 x 1 inch, so the handle threads match standard cabinet hardware tap, supporting straightforward fastening into typical door and drawer thicknesses. With an overall length of 4-7/16 inch, the handle extends modestly beyond the mounting centers, which affects where it lands on narrow frames and how far it reaches across wider fronts. A 1 inch projection pulls the gripping surface out from the cabinet plane, which shapes hand clearance and how the pull feels under load when opening heavier drawers.

How This Berenson Pull Works In Use

Where The Vintage Nickel Pull Fits Best

The 3-3/4 inch (95 mm, 96mm) center to center spacing on this Laura 2 collection zinc pull aligns with a widely used drilling pattern, so it fits many cabinet doors and drawers that already follow that dimension. On new installations, that same measurement provides a predictable layout line across a run of fronts, which helps keep hardware visually level from cabinet to cabinet. The 4-7/16 inch overall length means the pull covers a reasonable span on typical door rails, which can visually balance surrounding stile and panel details. Width of 7/8 inch defines the band of metal that shows against the wood or laminate, which influences how boldly the handle reads against lighter or darker finishes. Vintage nickel finish governs the color of the pull, so it suits projects calling for a nickel tone rather than brass, chrome, or darker finishes.

Details That Support Repeatable Handle Results

The center to center value of 3-3/4 inch (95 mm, 96mm) on the Berenson 9821-1VTN-P pull establishes a single, consistent measurement, which streamlines jig setup for repetitive drilling along large cabinet runs. Using that fixed spacing, installers can layout rows of pulls with reduced measuring variation, which supports cleaner visual alignment across banks of doors and drawers. The specified 8-32 x 1 inch screw size ties the handle to a known machine thread and length, which aligns with common cabinet construction and helps standardize hardware bins on shop carts. With 1 inch projection, the pull stands out enough to grip while staying relatively close to the face, which can aid clearances when doors swing near walls, appliances, or adjacent casework. Zinc construction and the Laura 2 collection design give the handle a defined profile and mass, which sets the tactile feel when users operate doors and drawers throughout the life of the installation.

Common Questions About This Laura 2 Pull

Choose This Pull For Matching Cabinet Runs

The Berenson Laura Series cabinet pull in vintage nickel pairs a 3-3/4 inch (95 mm, 96mm) center to center pattern with zinc construction and Laura 2 styling, so it suits projects needing consistent hardware across multiple fronts. With 4-7/16 inch length, 7/8 inch width, and 1 inch projection, it defines a clear, repeatable footprint on doors and drawers. For cabinet work that calls for this exact spacing, finish, and feel, this 9821-1VTN-P pull from Wurth Baer Supply is ready to slot into layout plans.