Berenson Laura Series Cabinet Pull For Cabinets

Berenson Laura Series cabinet pull is a zinc handle in the Laura 2 collection with a vintage nickel finish, so it delivers a specific style while using a known material that behaves predictably during cabinet or furniture work. The 6-5/16 inch (160 mm) center to center measurement defines the hole spacing, which sets the drilling layout for both new construction and replacements using this pull. The overall 7-1/4 inch length establishes the visual span across a drawer or door, helping align this pull with rail widths and door proportions. The 13/16 inch width describes the grip surface size, affecting how the hand engages the pull when opening heavier cabinet doors. A 1 inch projection sets how far the pull stands off the face, which controls finger clearance and reduces contact with the cabinet surface during regular use.

Key Laura Vintage Nickel Pull Details For Projects

• The 6-5/16 inch (160 mm) center to center dimension fixes the hole spacing, which simplifies layout when drilling or re-drilling fronts to match this pull on cabinets and drawers.
• The overall 7-1/4 inch length provides a defined handle span, which helps you line up the pull with stile or drawer front geometry for consistent visual alignment across a run.
• The 13/16 inch width defines the gripping area, giving a measurable surface that supports a full finger purchase when operating doors or drawers under everyday load.
• The 1 inch projection sets stand-off from the door or drawer face, which creates room for fingers behind the pull and helps keep finished surfaces away from constant hand contact.
• The zinc material described for this pull establishes the base metal, which influences how the vintage nickel finish presents and how the handle responds to normal cabinet-use conditions.
• The vintage nickel finish identifies the surface appearance, which allows this pull to be matched with other vintage nickel decorative hardware in the same job for a unified look.

Installation Layout And Fit For This Cabinet Pull

The 6-5/16 inch (160 mm) center to center specification defines the exact distance between mounting points, so hole drilling or existing hole re-use can be planned directly from this number. Because the length is 7-1/4 inch, the pull extends beyond the hole pattern at each end, which affects where the handle edges land relative to the cabinet door or drawer edges. The 1 inch projection controls the gap between the pull and the front surface, which dictates how fingers approach the handle during use. The 13/16 inch width works together with the projection to define the pull footprint on the face, influencing both clearance around adjacent fronts and how the handle seats on narrow rails.

Using The Laura 160mm Center To Center Pull

Where This Vintage Nickel Cabinet Pull Fits Best

The Laura 160mm center to center pull is described as part of the Laura 2 collection, so it aligns visually with other handles in that family when used across kitchens, baths, or casework sharing that style language. The vintage nickel finish positions the pull for installations calling for a muted metallic appearance that coordinates with other vintage nickel hardware on doors or furniture pieces. The 6-5/16 inch (160 mm) center to center size suits layouts that use this mid-length spacing, giving a proportion that works on many cabinet doors and medium to wider drawers. With a 7-1/4 inch overall length, the handle spans a noticeable section of the front, which can visually anchor larger drawer faces while still staying workable on narrower doors.

Details That Support Consistent Mounting Results

The defined 6-5/16 inch (160 mm) center to center measurement lets drilling jigs or CNC programs be set precisely, which supports repeatable alignment from front to front when this pull is used in quantity. Having the overall length specified at 7-1/4 inch helps position the pull so its ends line up predictably relative to cabinet edges, reducing layout guesswork when balancing margins. The stated 1 inch projection keeps the pull at a known stand-off, which can be factored into clearances in tight spaces where doors open near walls or adjacent cabinets. The 13/16 inch width combines with projection to determine the contact patch on the face, which matters when planning around panel profiles or decorative edge details. The zinc material and vintage nickel finish pairing defines how the visible surface will read against common cabinet finishes, aiding in maintaining consistent appearance across multiple doors and drawers.

Common Questions About This Laura Cabinet Pull

Select This Laura Pull For Matching Layouts

The Berenson Laura Series cabinet pull with 6-5/16 inch (160 mm) center to center spacing, 7-1/4 inch length, and 1 inch projection offers defined dimensions that translate directly into drilling layouts and visual alignment. The zinc construction with vintage nickel finish provides a specific material and appearance combination for coordinating decorative hardware. When a project calls for these exact measurements and a Laura 2 collection look, this pull can be selected to match spacing, proportion, and finish across cabinets and furniture runs.