Berenson Skyline Series 12-5/8" (320 mm) Center to Center Brushed Nickel Pull, - 9974-1BPN-P

Berenson Skyline Pull 320mm For Cabinets

Berenson Skyline pull 320mm gives you a long, continuous grip for cabinet doors or drawers, which helps on wider fronts where two smaller pulls would break the line. The pull is part of the Skyline 2 collection, so it ties into other Skyline 2 pieces when you are laying out a full room. Its brushed nickel finish softens reflected light on the handle, which reduces visible fingerprints and blends with many brushed nickel hinges and fixtures already on site. The pull is made from zinc, which keeps weight manageable on large cabinet runs while still giving a solid metal feel in the hand. A 13 inch overall length stretches across more of the panel face, which visually anchors tall doors and deep drawers. The 12-5/8 inch center to center drilling dimension matches the stated spec, which supports accurate layout before fronts are installed.

Key Skyline 2 Pull Details For Layout

• The 12-5/8 inch center to center measurement sets consistent hole spacing across multiple doors, which speeds drilling when using a template or stop setup.
• The 13 inch length or diameter spec tells you how far the pull spans on the face, which helps position it clear of panel edges, neighboring pulls, or decorative profiles.
• The 1-1/16 inch projection moves the gripping surface off the cabinet face, which leaves finger clearance behind the pull for comfortable use on thicker fronts.
• The 5/8 inch width keeps the pull visually slim, which works well when you want a modern line without a bulky look on narrow rails or stiles.
• The brushed nickel finish provides a muted metallic surface, which coordinates with other brushed nickel decorative hardware in the same space for a unified appearance.
• The zinc material forms the body of the pull, which provides a metal component that is straightforward to handle during installation and alignment.

Mounting Dimensions And Handle Fit Details

The 320 mm center to center dimension defines the mounting pattern for this handle, which is useful when cabinets are pre-drilled on CNC equipment or jigs. With the center to center set at 12-5/8 inches, the pull fits wide drawer fronts where you want the grip closer to the corners. The 1-1/16 inch projection keeps the hand away from the door face, which reduces knuckle contact on raised panels or applied moldings. A 5/8 inch width keeps the pull narrow enough for tight rail heights, which helps when working near glass frames or narrow top rails. The 13 inch overall length gives enough bar past the screw locations to visually balance the hardware, which matters on tall pantry doors or oversized drawers in a kitchen or shop.

How This Brushed Nickel Cabinet Pull Works Best

Using The 12-5/8 Inch Cabinet Handle On Fronts

This 12-5/8 inch center to center cabinet handle works well on wide kitchen, bath, or shop drawers where a smaller pull would look undersized. The 13 inch overall length follows the line of the drawer or door, which helps align sightlines across a bank of cabinets. With a 5/8 inch width, the handle sits comfortably on mid-size rails, which avoids crowding panel details on Shaker or flat fronts. The brushed nickel finish from the Skyline 2 collection ties into other brushed nickel hardware in the project, which keeps the visual hardware scheme consistent from piece to piece. Zinc construction gives the pull a metal body that installers can grip firmly when tightening the fasteners, which helps keep the handle from twisting during final alignment. The defined 320 mm drilling pattern lets shop staff or installers repeat the same layout across multiple cabinets, which streamlines production runs.

Why The Pulls Dimensions Support Clean Results

The 1-1/16 inch projection creates a working gap between hand and door, which allows users to open heavy drawers without scraping fingers along the face. That same projection keeps the pull far enough out that knobs or other hardware on adjacent fronts are easy to access, which is helpful on tight corner cabinets. The 5/8 inch width limits how much real estate the pull occupies, which leaves room for edge profiles or glass stops near the mounting area. The brushed nickel finish diffuses light along the zinc body, which reduces sharp reflections on long cabinet runs under task lighting. Because the pull belongs to the Skyline 2 collection, it offers a coordinated option when designers want a single style across wall cabinets, base cabinets, and tall units. The 12-5/8 inch center to center detail aligns with the SAP description "SKYLINE PULL 320MM CC BRSH NKL," which gives purchasing and shop teams a clear match between drawings and hardware.

Common Questions About The Skyline 2 Nickel Pull

Select This Skyline Pull For Consistent Runs

The defined 320 mm center to center drilling on this Berenson Skyline zinc pull supports consistent cabinet runs where every handle lines up. Its 13 inch length, 1-1/16 inch projection, and 5/8 inch width give clear dimensions for shop drawings. The brushed nickel finish from the Skyline 2 collection offers a coordinated option across multiple cabinet types. For projects calling for a 12-5/8 inch center to center, this 9974-1BPN-P pull provides a straightforward match for layout and installation planning.