Description
Amerock Oberon Satin Nickel Knob For Cabinets
Amerock Oberon satin nickel knob is a 1-3/4 in (44 mm) diameter decorative knob designed for cabinet and furniture doors or drawers, so it serves as both a pull point and a visible style element on finished work. The knob is part of the Oberon Collection, whose solid circular design and graphic cut out edges add depth and dimension in both modern and traditional settings, giving installers a single design that works across mixed interiors. An intriguing frosted insert subtly catches light and reflects the base metallic finish, which helps the knob read consistently with other satin nickel components on the same run. The satin nickel finish presents a muted metallic look that coordinates with common hinges and slides, supporting visually unified hardware layouts on jobs using Amerock Corporation products.
Practical Details Of The Oberon Cabinet Knob
- The Oberon Collection's solid circular design with graphic cut out edges adds depth and dimension in both modern and traditional settings, so one knob style can be specified across varied cabinet lines on the same project.
- The intriguing frosted insert subtly catches light and reflects the base metallic finish, creating a consistent visual tie-in with satin nickel fixtures when doors are opened or viewed under changing light.
- The knob is made from zinc, providing a solid-feeling cabinet contact point that supports repeated daily use on doors and drawers in typical woodworking installations.
- The satin nickel finish coordinates with other satin nickel decorative hardware, allowing this Amerock knob to fit into existing satin nickel hardware schemes without drawing unwanted contrast.
- The base diameter of 3/4 in keeps the footprint compact at the mounting point, which helps the knob sit cleanly on narrower rails or stiles without crowding nearby edges.
Installation Dimensions And Mounting Considerations
This Amerock Corporation knob has a 1-3/4 in (44 mm) diameter, giving installers a clear target size when laying out drilling locations on doors and drawer fronts. A projection of 1-5/16 in sets how far the knob stands off the surface, which affects finger clearance and interaction with adjacent doors on tight reveals. The knob width is also 1-3/4 in, matching its diameter for a true circular profile that simplifies layout in grid or centered installations. A base diameter of 3/4 in defines the contact area against the cabinet face, guiding decisions about placement on narrow frames or shaker-style rails. The specified 8-32 x 1 in screw size identifies the thread and length standard this knob is designed around during mounting.
Using The Oberon Knob In Real-World Projects
Where The Oberon Satin Nickel Knob Works Best
The Amerock Oberon Series satin nickel 1-3/4 in diameter knob is positioned for use on cabinetry and furniture where a solid circular pull is desired, because its form factor matches common residential and light commercial cabinet layouts. Being part of the Oberon Collection, it carries a coordinated design language, so installers can repeat this knob across multiple rooms while keeping the same profile and detailing. The solid circular design with graphic cut out edges adds depth and dimension in both modern and traditional settings, supporting projects that blend flat-front panels with more detailed doors. The intriguing frosted insert, which subtly catches light and reflects the base metallic finish, helps the knob stand out visually on both painted and woodgrain surfaces. The satin nickel finish ties into typical satin nickel hinges and slides, helping create a consistent hardware appearance across a bank of cabinets or a full kitchen installation.
Details That Support Consistent Results On Installs
The 1-3/4 in (44 mm) diameter provides a repeatable reference when marking center points on doors and drawers, which helps maintain even sight lines over long runs of cabinets. Matching diameter and width make the knob truly round in plan, so there is no orientation dependence during installation; this simplifies alignment work and reduces layout time on repetitive jobs. A projection of 1-5/16 in defines stand-off from the door or drawer front, which influences how fingers engage the knob, especially when cabinets are installed near walls or adjacent tall units. The 3/4 in base diameter sets a defined bearing surface against the face, supporting stable seating on the mounting hole without overhanging narrow framing. The specified 8-32 x 1 in screw size gives the thread standard and nominal length the knob is built around, which informs drilling and preparation steps when working with typical door and drawer thicknesses in woodworking projects.
Common Questions About The Oberon Satin Nickel Knob
What is the overall diameter of this Oberon knob?
The Amerock Oberon satin nickel knob has a 1-3/4 in (44 mm) diameter, giving a generous gripping surface and a clear dimension for layout on cabinet doors and drawer fronts.
How far does the Oberon cabinet knob project from the door?
The Oberon knob projects 1-5/16 in from the mounting surface, setting the stand-off distance that affects finger clearance and how it interacts with adjacent doors or walls.
What material is the Amerock Oberon satin nickel knob made from?
The Oberon satin nickel 1-3/4 in diameter knob is made from zinc, providing a solid-feeling pull point suitable for repeated opening and closing of cabinet doors and drawers.
Which screw size matches the Oberon BP36604G10 knob?
The Amerock BP36604G10 knob is specified with an 8-32 x 1 in screw size, indicating the thread and nominal length standard used for mounting into cabinet fronts.
What is the base diameter where the knob meets the cabinet?
This Oberon satin nickel knob has a 3/4 in base diameter, defining the contact area against the door or drawer face and helping determine placement on narrow rails.
How does the frosted insert affect the knob appearance?
The Oberon Collection knob uses an intriguing frosted insert that subtly catches light and reflects the satin nickel base finish, adding visual depth on installed cabinets.
Selecting This Oberon Knob For Your Next Project
The Amerock Oberon satin nickel 1-3/4 in diameter knob combines a solid circular design, graphic cut out edges, and a frosted insert that reflects the base metallic finish, so it supports coordinated cabinet hardware layouts. With defined dimensions, a 3/4 in base diameter, a projection of 1-5/16 in, and an 8-32 x 1 in screw size, it offers clear mounting and layout parameters for woodworking professionals and serious DIY installers planning their next cabinet or furniture project.
