
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Stainless steel knob from Sugatsune America gives you a compact, metal pull point wherever a small, positive grip is needed. The knob uses stainless steel, providing a solid feel in the hand that supports repeat use on cabinets or similar fronts. Its 20 mm, or 25/32 inch, diameter creates a defined contact area that is easy to grab without taking up much face space on the workpiece. This scale suits tight layouts where larger pulls would conflict. The satin stainless steel finish visually softens the metal surface, which helps the knob sit quietly on wood, laminate, or other door and drawer faces. Because the finish is satin, fingerprints and handling marks tend to be less visually distracting compared with glossier surfaces. The part is identified as EY-326/20, which lets shops and installers reference the exact knob again when matching or expanding an existing run.
The 20 mm, or 25/32 inch, diameter on this stainless steel knob helps determine drilling layout, because the face size guides how far from door or drawer edges you position the mounting hole. Its compact diameter makes it practical near narrow stiles or close to adjacent fronts where space is tight. The stainless steel construction gives a stable anchor point once fastened from the rear of a cabinet front or similar panel. The satin stainless steel finish provides a neutral look around the mounting location, so the knob reads as a simple functional point instead of a dominant visual element on the surface.
The Sugatsune EY-326/20 stainless steel knob, at 20 mm or 25/32 inch diameter, suits cabinet and furniture fronts that call for a small, round handhold. This scale fits doors or drawers that do not need a full-length pull yet benefit from a defined grip area. In tight banks of cabinets, the compact diameter helps avoid knob-to-knob interference when fronts are closely spaced. The satin stainless steel finish lets this decorative hardware and moldings category knob sit comfortably alongside other stainless details in a shop or built-in environment. Because it is a stainless steel knob, it can visually coordinate with stainless hinges, slides, or other visible metal components in a woodworking installation.
The defined 20 mm, or 25/32 inch, diameter gives installers a consistent reference when laying out hardware, which supports even sightlines across multiple fronts. That repeatable size also helps jigs and drilling patterns stay uniform from cabinet to cabinet. The satin stainless steel finish provides a middle-ground sheen that works in both contemporary and more traditional millwork, limiting the need to change hardware styles between adjoining areas. Stainless steel material contributes to a solid tactile feel as the knob is pulled, which matters on frequently used doors and drawers. The specific EY-326/20 part number ties those physical traits to a single identifier, allowing shops to specify the same knob across drawings, cut lists, and future service work without confusion about diameter or finish.
The Sugatsune EY-326/20 stainless steel knob has a 20 mm, or 25/32 inch, diameter, giving a compact round grip that positions well on smaller cabinet doors or drawers.
This Sugatsune America EY-326/20 knob uses stainless steel, providing a solid metal handhold suited to frequent operation on cabinet and furniture fronts.
The EY-326/20 knob has a satin stainless steel finish, giving a muted look that helps it blend with surrounding decorative hardware and reduce visible handling marks.
The 20 mm, or 25/32 inch, diameter keeps the knob compact, so it can be set near narrow stiles or closely spaced fronts without crowding adjacent hardware.
The EY-326/20 part number uniquely identifies this 20 mm satin stainless steel knob, helping shops reorder the exact size and finish for future work.
This knob sits in the decorative hardware and moldings knobs category, making it a small round pull option for cabinets and related woodworking projects.
The Sugatsune America EY-326/20 stainless steel knob gives you a defined 20 mm, or 25/32 inch, diameter pull point with a satin stainless steel finish that supports consistent layout across cabinets. For projects built around stainless decorative hardware, this knob adds a compact, repeatable grip that aligns with that material choice and part identification. Use the specific EY-326/20 designation when planning runs, so the same diameter and satin stainless finish can be carried through future phases or matching work.