#6 x 1/4 flat head euro screw describes a compact countersunk fastener that sits flush in a euro-style hinge hole, which helps keep hinge plates aligned on cabinet doors where low-profile hardware is required. The flat head design creates a countersunk bearing surface, so the screw pulls the hinge snug to the door without leaving hardware proud of the surface. The nickel finish on this screw provides a clean metallic look that visually matches typical hinge hardware, which helps maintain a consistent appearance on exposed installations. The Phillips drive head, specified as PH2, matches common #2 Phillips bits, allowing installers to drive these screws with standard drivers used on most hinge work. The screw size noted as M5 x 1/4 gives a metric shank diameter with a short length, which supports fastening into thin door materials while limiting breakthrough.
The web description states that this countersunk screw is "for a minimum door thickness of 1/4", which means the 1/4 length is sized to sit within thin doors without excessive breakthrough on the back face. The specification "for aluminum, HPL, mineral composite" defines the intended door materials, so installers can apply this screw in those substrates where hinge mounting requires appropriate threads and point style. The blunt point works with these material types by reducing aggressive drilling action at the tip, which matters when seating into pre-bored or carefully machined holes. The flat head euro design interfaces with hardware cups or plates designed for this style, supporting a consistent seat and clamp force across the hinge.
The SAP description identifies this part explicitly as a "NICKEL SCREW FOR TIOMOS M0 HINGE", so its dimensions and head style are aligned with Tiomos M0 hinge applications on cabinet doors. The category "Hinges|Hinge Accessories" and product class "Hinge Screws and Accessories" place this screw in the hinge hardware family, which positions it for use wherever hinges from this system are being mounted to suitable doors. The product name calls out "by Grass" and the brand is "Grass America", so it is intended to support Grass hinge installations as part of that hardware line. The material note "for aluminum, HPL, mineral composite" shows that this screw is aimed at doors or fronts produced from those non-wood substrates, which are common in contemporary cabinetry and fixture work.
The screw dimensions listed as "M5 x 1/4" and "#6 x 1/4" indicate a relatively short screw designed for thinner door constructions, which supports hinge mounting without projecting through the opposite face on 1/4 minimum thickness doors. The flat head euro configuration interfaces with countersunk hinge or plate holes found in these systems, so the screw head nests cleanly for consistent clamping. The classification under hinge screws emphasizes its role as a dedicated fastener within a hinge assembly, helping maintain predictable positioning of Tiomos M0 hinges on compatible doors made from the named materials.
The specification "countersunk screw PH2, M5 x 1/4" provides a combination of a Phillips PH2 drive and a short M5 shank, which allows installers to use standard drivers while controlling penetration depth on thin doors. The product name notes "Flat Head Euro Screw, Phillips Drive Coarse Thread and Blunt Point", meaning the head geometry, drive style, and thread form are tuned for euro hinge mounting where fast engagement in prepared holes is important. The coarse thread engages quickly in appropriate substrates, while the blunt point helps manage entry in materials like aluminum, HPL, and mineral composite named in the web description. The defined minimum door thickness of 1/4 sets a clear thickness threshold, so the length works within that door profile during hinge installation tasks.
The nickel finish, called out both in the product name and SAP description, coordinates with nickel-tone hinge systems such as Grass Tiomos M0, helping maintain hardware color consistency across the interior of casework. The alignment with the Tiomos M0 hinge line implied by the SAP description and supported by the Grass America branding positions this screw as part of a system approach to hinge installation. The classification as hinge screws and accessories clarifies its purpose in the workflow, letting installers assign it to hinge mounting steps on suitable aluminum, HPL, or mineral composite doors where euro-style flat head screws are required.
The screw is identified as a "NICKEL SCREW FOR TIOMOS M0 HINGE", so it is intended for use with Tiomos M0 hinge applications within the Grass hinge system.
The web description specifies use "for aluminum, HPL, mineral composite", so it targets hinge mounting on doors made from those materials in cabinet or fixture work.
The description notes "for a minimum door thickness of 1/4", meaning the 1/4 inch length is sized to work with doors at or above that thickness.
The web description calls it a "countersunk screw PH2", so it uses a Phillips PH2 drive that matches common #2 Phillips bits used in hinge installation.
The flat head euro design provides a countersunk head that nests into matching hinge holes, pulling the hinge plate tight and keeping the head flush with the hardware surface.
The product name states a "coarse thread and blunt point", which promotes fast engagement in suitable holes while moderating tip penetration in thin aluminum, HPL, or mineral composite doors.
The combination of "#6 x 1/4 Flat Head Euro Screw" sizing, "countersunk screw PH2, M5 x 1/4" geometry, and the SAP note "NICKEL SCREW FOR TIOMOS M0 HINGE" positions this part as a focused choice for Tiomos M0 hinge installations. The stated suitability "for aluminum, HPL, mineral composite" and the minimum 1/4 door thickness detail support planning hinge fastening on those specific door constructions. For projects built around Grass America hinge systems, this Grass-branded screw aligns with the hinge hardware family, helping standardize fastening across similar openings.
Sold In: 1 Each