Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vario Corner Clip is a variable angle corner clamping clip designed for projects that do not suit a simple clamp, so it helps on chair legs, odd angles, and long glue-ups where corners all need even pressure. This clip works with a strap clamp that surrounds the assembly and applies pressure to most corners, which matters when keeping miters and angled joints tight during curing. The Vario clip corners use twin-tilting pressure pads that auto-adjust from 60 degrees to 180 degrees, so one setup handles a wide range of common multi-angle assemblies without resetting jigs. The product is part of the Bessey Tools clamp line, which keeps it in the same system family many shops already rely on for woodworking glue-ups. The VAC-6 identification ties it to this specific configuration, which helps match the correct clip style when planning corner clamping on complex frames.
The strap is drawn in on both sides through the clamp body, which pulls each run of the band at the same rate so every attached Vario Corner Clip sees similar tension. This equal draw helps hold multi-corner assemblies without one side creeping. The integrated coiling mechanism is operated by a crank handle on the strap clamp housing, which allows quick recovery of the polyester band after clamping and prepares the strap for the next assembly. The special woven polyester band offers a 23 ft clamping range, which lets shops position Vario corner clips where they are needed along longer parts instead of splicing shorter clamping setups. The steel wire loop opens quickly as part of the band system, which provides a simple way to adjust or release a glue-up when shifting from dry-fit to final clamp.
The web description notes that some projects defy a simple clamping solution, and in those situations the Vario Corner Clip works with the strap clamp to surround the project so corners receive balanced pressure. This arrangement is useful on chair legs and similar assemblies because the corners often meet at angles that do not match standard parallel clamps. When the strap clamp applies pressure evenly to most corners with the help of the Vario Corner Clip, the load follows the frame perimeter, which helps keep joints aligned along their full length. The Vario clip corners are described as practical, and their twin-tilting pressure pads auto-adjust from 60 degrees to 180 degrees so the same clip adapts to acute and obtuse angles on multi-angle projects. That auto-adjust action means the contact surfaces stay flat against the work, which supports cleaner glue lines and consistent squeeze-out across each miter.
The strap is drawn in on both sides so pressure is applied equally on all corners without distortion, which supports repeatable setups because each tightening stroke affects the frame symmetrically. When the band tension travels through the Vario clip corners, the twin-tilting pressure pads convert that pull into face pressure at angles between 60 degrees and 180 degrees, so operators can rely on the clip to seat parts instead of shimming. The integrated rewind mechanism with crank handle manages the same woven polyester band every time, which keeps the 23 ft clamping range ready for both small frames and long glue-ups without cutting or re-threading. The special woven polyester band provides high resistance to tearing, which matters during repeated tensioning across different projects. The steel wire loop opens quickly for band adjustment or release of a glue-up, so moving from dry-run test assemblies to final adhesive work becomes a straightforward step with the same clamping path.
The Vario Corner Clip uses twin-tilting pressure pads that auto-adjust from 60 degrees to 180 degrees, so it handles a broad set of angles on multi-angle woodworking projects.
The strap is drawn in on both sides, so tension reaches all corners equally, which reduces frame distortion while tightening multi-corner glue-ups.
The special woven polyester band has a clamping range of 23 ft, so it spans small frames and longer assemblies using the same strap clamp and corner clips.
The band is a special woven polyester that provides high resistance to tearing, so it holds up under repeated tensioning on woodworking glue-ups.
The integrated rewind mechanism uses a crank handle to coil the strap, so setup and breakdown between glue-ups are faster and the band stays manageable.
The steel wire loop opens quickly and is a simple way to adjust or release a glue-up, so tension changes follow the same controlled path every time.
This Bessey Tools Vario Corner Clip setup works with a strap clamp that surrounds projects, so it suits chair legs, odd angles, and long glue-ups needing even pressure at corners. The twin-tilting pressure pads auto-adjust from 60 degrees to 180 degrees, so one corner solution supports many frame geometries across the shop. With a special woven polyester band delivering a 23 ft clamping range and high resistance to tearing, the system supports repeated clamping cycles on different assemblies. Choosing the VAC-6 Vario Corner Clip configuration connects these variable angle clips to a proven strap clamp approach for controlled multi-angle woodworking joints.
Sold In: 1 Package
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BEVAS-23PLUS2K Mfr# VAS-23+2K-CB | 23' Variable Angle Strap Clamp with 2K Handle |
