Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quadro V6 with Silent System is a right-hand ball-bearing undermount drawer slide for 320mm drawer boxes, bringing damped, controlled closing to concealed undermount installations in kitchen, bath, and furniture cabinetry.
Undermount slides are handed, and this unit is the right-hand cabinet member. That means it mounts to the right side of the cabinet interior and pairs with the left-hand Quadro V6 member to form a working set for one drawer. Ordering two of this unit will not produce a functional pair — handedness is the first spec to confirm before adding to cart. The Quadro V6 family covers a wide range of lengths and configurations, so match both the length and the hand to your project before ordering.
The Silent System is Hettich's designation for integrated soft-close damping built into the Quadro runner. Rather than a separate add-on mechanism, the damping is part of the slide itself: as the drawer approaches the closed position, the damper takes over and draws it home without a slam or a snap. The result is the quiet, controlled close that residential kitchens and furniture projects expect from a premium undermount. This is damped soft-close action — not a self-closing ramp — so the distinction matters when matching the motion spec to a project requirement.
The 320mm nominal length positions this slide for medium-depth drawers — utility drawers, bedroom case goods, bath vanity drawers, and kitchen accessory drawers where a shallower box suits the cabinet depth. Because the drawer box must be built to the Hettich Quadro specification for length, side thickness, bottom groove, and rear notch, this slide is the strongest fit for shops and installers working from Hettich's published drawings. Face-frame cabinet installations require the appropriate rear mounting brackets, sold separately, to support the back of the slide where the face frame sets it away from the cabinet side. Frameless cabinets take direct side-panel mounting on the system hole grid.
This listing is the right-hand cabinet member only. You need one right-hand and one left-hand member to complete a single drawer installation — they are separate line items in the Quadro V6 family.
The Quadro V6 series is engineered for a specific drawer side thickness. Confirm the required side thickness against Hettich's published drawer box specification before building or ordering; the wrong thickness will prevent the locking device from seating correctly.
Yes. Face-frame construction sets the cabinet side back from the frame opening, so the rear of the slide needs a bracket to reach the cabinet interior. Quadro rear brackets are Quadro-specific and must be ordered separately.
No. A self-close ramp pulls the drawer shut with spring force and no damping. The Silent System adds a damper that controls the final travel, so the close is slow and quiet rather than a snap. These are two different motion behaviors.
Quadro components, including locking devices, rear brackets, and adjustment clips, are engineered for the Quadro series. Do not mix Quadro hardware with other Hettich or third-party runner families.
Confirm the hand, confirm the drawer box spec, and this Quadro V6 right-hand member slots into a clean, quiet undermount installation that stays hidden every time the drawer opens.
Sold In: 20 Each