Plywood Hardwood White Maple, Veneer Core Unfinished 1/8" Thickness, 48.5 x 96.5

Plywood Hardwood White Maple Panel For Projects

Plywood Hardwood White Maple identifies this sheet as a hardwood plywood panel with a white maple face, so it suits jobs where a maple look is needed on a stable base. The product is classified as plywood, so it is designed as a layered wood panel for structural and decorative applications. The 1/8 inch thickness means the sheet is relatively thin, which helps when a lighter panel is needed or where material build-up must stay minimal in an assembly. The 48.5 x 96.5 panel size indicates a large, sheet-good format that covers wider cabinet, fixture, or wall sections with fewer seams. The panel is described as domestic unfinished, so the maple surface is supplied without a factory-applied topcoat and can be processed according to project finish systems. The veneer core construction provides a core built from wood veneers, giving a wood-based substrate for further machining.

Key White Maple Veneer Panel Details For Work

• The white maple hardwood face identifies the visible species, so it matches projects where a maple appearance is specified or coordinated with other maple components in an installation.
• The veneer core construction creates a core built from stacked wood veneers, helping the panel machine like wood while supporting stable surfaces for bonding or finishing in shop workflows.
• The domestic unfinished description indicates the surface has no factory-applied finish, so shops can sand, stain, or topcoat according to their own finishing systems and job standards.
• The 48.5 inch width gives slightly more than nominal 4 foot coverage, allowing trimming to square edges while still spanning standard cabinet or built-in widths.
• The 96.5 inch length provides slightly more than nominal 8 foot coverage, supporting full-height or long-run layouts with allowance for clean end trimming during layout.

Veneer Core Maple Plywood Handling And Fit

The 1/8 inch thickness gives a relatively thin profile, so this maple plywood suits applications requiring low build height or lighter weight sheets. The large 48.5 x 96.5 dimensions give layout flexibility, so panels can be broken down into smaller parts for cabinet or fixture components while leaving trim allowance. The veneer core structure uses wood veneers through the thickness, which supports typical woodworking operations such as cutting and edge preparation in standard panel-processing setups. The classification in plywood hardwoods, domestic and import, indicates it belongs to a group of hardwood-faced plywood products used in woodworking, helping it line up with similar sheet goods in planning. The noted potential for higher shipping costs reflects the full-size panel format, which affects how material is transported to the shop environment.

Using This Garnica Maple Panel In Projects

Where This White Maple Plywood Fits Best

The white maple hardwood face makes this panel suitable wherever a maple appearance is part of the design, such as maple-faced casework or other maple-detailed assemblies. Its 48.5 inch width and 96.5 inch length cover broad surfaces, which helps when planning large panels that later get cut down into doors, sides, or partitions. Being part of the plywood hardwoods category, this sheet fits into workflows that already use hardwood-faced plywood as a primary material. The veneer core domestic unfinished description points to a panel ready for shop finishing steps, allowing it to move from cutting to sanding and then into the chosen finish schedule within the same material family.

Details That Support Repeatable Layout And Cutting

The 1/8 inch thickness gives installers and fabricators a consistent, known panel thickness to design around, which helps when calculating reveals, offsets, or lamination build-ups in assemblies. The oversize 48.5 x 96.5 dimensions offer extra material beyond nominal 4x8 sizing, giving margin for squaring, trimming, and optimizing parts without sacrificing required net dimensions. The veneer core build means the inner plies are wood veneers rather than non-wood substrates, supporting predictable behavior when ripping or crosscutting multiple sheets to identical sizes. The clearly defined product name and manufacturer part number GAWM25048WPFVC give a unique identifier, which helps repeat orders match the same maple-faced, veneer core, domestic unfinished specification from Garnica Plywood across multiple jobs.

Common Questions About This Maple Veneer Core Panel

Select This White Maple Panel For Sized Maple Work

This Garnica Plywood hardwood white maple sheet combines a maple face, veneer core construction, 1/8 inch thickness, and 48.5 x 96.5 dimensions, so it aligns with projects needing thin, maple-faced panels in a full-size sheet-good format. The domestic unfinished description means it is ready for shop-controlled finishing systems once cut and prepared. With a defined manufacturer part number GAWM25048WPFVC, this panel can be specified consistently across drawings and purchase lists. Use this plywood when a white maple hardwood face and veneer core construction match the material requirements for your next cabinet, fixture, or panel-based build.