Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Spektra up-cut plastic cutting CNC bit is a 1/4 inch x 2 inch x 3/4 inch spiral router bit designed for CNC machining of MDF, laminate, and plastic, so one tool handles these common sheet materials in a production workflow. The bit uses a single O flute with an up-cut geometry, which pulls chips up and away from the cut, helping maintain a cleaner edge and reducing recutting of chips in deeper passes. A 1/4 inch shank matches many CNC collet setups, so the bit integrates easily into existing toolholding without special adaptors. As part of Amana Tool's Spektra Extreme Tool Life coated series, the cutting edge is engineered for extended use, which supports longer runs between tool changes on CNC jobs. The router bit sits within the Bits, Blades and Cutters category under spiral and plastic cutting, reinforcing its role as a dedicated choice for these materials.
This Amana Tool router bit uses a 1/4 inch shank, so it fits collets designed for that diameter and allows straightforward mounting in CNC spindles that accept 1/4 inch tooling. The up-cut spiral geometry works with CNC feed directions that rely on upward chip evacuation, aligning with common toolpath strategies for through cuts and grooves in MDF, laminate, and plastic. The O flute design pairs with CNC speed and feed settings aimed at efficient chip removal in these materials, supporting smooth routing when the machine is programmed within typical parameters for single-flute plastic cutting bits. As part of Spektra Extreme Tool Life coated tooling, the bit is intended for industrial CNC cutting, so its design supports repeated installation and removal in a production environment where tool changes are part of regular setup routines.
This 51404-K Spektra Extreme Tool Life coated router bit is identified as the ultimate choice for MDF, laminate, and plastic industrial CNC cutting, so it is well suited to nested-based and component machining in these substrates. The bit's position in the spiral and plastic cutting class means its geometry is tailored for routing plastics and related sheet goods rather than general-purpose cutting, which supports cleaner edges and more predictable chip behavior on those materials. Its single O flute focuses the cutting action along one sharp edge, which works effectively in plastic cutting where controlled chip flow helps avoid melting and buildup along the cut path. The up-cut design directs chips upward out of the kerf, which is valuable in through-cutting applications on CNC tables where debris needs to clear quickly to keep the tool engaged in fresh material.
The ACo micro thin ceramic coating on the cutting areas retains crucial sharpness and lubricity, so the bit keeps a keen edge that slides through MDF, laminate, and plastic with less friction, supporting consistent cut quality over extended runs. By preventing high heat and oxidation at the cutting zone, the coating reduces thermal stress and surface degradation on the tool, which matters when CNC programs run long cycles where heat buildup could otherwise shorten tool life. The coating's approximately 4,500 Vickers hardness on the cutting areas provides solid hardness on the edge, so it resists wear better than uncoated bits and supports up to 2.5 times longer use compared to similar uncoated tooling. As the multi-colored hues on the bit dissipate upon use while the coating remains fully effective, visual changes during routing do not alter the bit's protective properties, allowing the tool to continue delivering the same edge performance. These characteristics combine to support repeatable results, because a stable, sharp cutting edge helps maintain programmed cut quality from the first sheet through extended production.
This router bit is identified as the ultimate choice for MDF, laminate, and plastic industrial CNC cutting, so it is intended for consistent work in those specific materials.
The ACo coating keeps the cutting edge sharp and lubricious, prevents high heat and oxidation, and provides about 4,500 Vickers hardness for longer edge life in CNC use.
The single O flute with up-cut geometry pulls chips upward from the cut, helping clear debris and support smoother routing in MDF, laminate, and plastic on CNC machines.
This Spektra Extreme Tool Life coated CNC spiral router bit uses a 1/4 inch shank, fitting collets sized for 1/4 inch tooling in many CNC spindles.
This ACo coated bit offers an increase of up to 2.5 times tool life compared to uncoated bits, so it can stay in service longer in similar CNC cutting conditions.
The multi-colored hues on the bit will dissipate upon use, but the ACo coating remains fully effective, so the color change does not reduce cutting performance.
This 1/4 inch x 2 inch x 3/4 inch Spektra Extreme Tool Life coated up-cut O plastic cutting CNC spiral router bit from Amana Tool brings an ACo ceramic-coated cutting edge to MDF, laminate, and plastic machining. Its 1/4 inch shank works with common CNC collet sizes, and the single-flute up-cut design supports efficient chip evacuation in these materials. For shops running industrial CNC cutting in MDF, laminate, and plastic, this 51404-K bit offers a coated cutting edge built for longevity and consistent results across repeated jobs.
