Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Roll-Ezy Aluminum Track System Ball Bearing Roller is a Knape and Vogt component designed for their Roll-Ezy 1/4 inch Aluminum Track System, so installers can match the roller directly to the specified track family. The product is identified by manufacturer part number 1098 ZC, giving an exact reference when ordering or matching to existing sheaves and tracks. This ball bearing roller is classified under builders hardware and sheaves and tracks, which positions it for sliding assemblies where guided movement along a track is required. The Web Description states it is for use with KV Roll-Ezy 1/4 inch Aluminum Track System, meaning it is tailored to that track size and profile for proper running clearance. Because the SAP Description defines it as a ball bearing roller that fits in KV1095 track, it links directly to that track designation for consistent system layout.
The SAP Description describing this as a ball bearing roller that fits in KV1095 track ties the component directly to that specific Knape and Vogt track label, so track selection and roller selection follow the same code. According to the Web Description, the steel ball bearing roller press fits into the bottom of the 1095 shoe, which defines how the roller is retained relative to the shoe used in the track assembly. The Web Description also indicates that it is for use with KV Roll-Ezy 1/4 inch Aluminum Track System, adding track family context for layout. Because the Web Description specifies 1/4 inch thick glass doors only, the door thickness and material pairing is clearly stated for projects built around the system.
The Web Description specifies that this component is for use with KV Roll-Ezy 1/4 inch Aluminum Track System, so it is applied in track runs based on that particular aluminum track family. The SAP Description calls it a ball bearing roller that fits in KV1095 track, which places it directly in track layouts identified with that KV1095 designation. Because the Web Description describes the part as a steel ball bearing roller that press fits into the bottom of the 1095 shoe, it is used in assemblies that are already using the 1095 shoe pattern and need a roller that conforms to that shoe interface. The Web Description also limits use to 1/4 inch thick glass doors only, so applications center on sliding glass doors in that thickness range where a matching Roll-Ezy track and shoe set is already specified.
The specific naming as Roll-Ezy Aluminum Track System Ball Bearing Roller, together with the manufacturer part number 1098 ZC, means an installer can order or reference the exact Knape and Vogt roller that corresponds to a KV Roll-Ezy 1/4 inch Aluminum Track System installation. The SAP Description that it fits in KV1095 track helps link the roller directly to track runs labeled KV1095 during planning or maintenance tasks. Since the Web Description states that the steel ball bearing roller press fits into the bottom of the 1095 shoe, the roller and shoe are matched for this interface, which matters when a consistent connection point between shoe and roller is needed in the sheaves and tracks assembly. The Web Description further specifying 1/4 inch thick glass doors only focuses the part on that door thickness, which matters when aligning door glass thickness to a known track, shoe, and roller arrangement.
The Roll-Ezy Aluminum Track System Ball Bearing Roller is described for use with the KV Roll-Ezy 1/4 inch Aluminum Track System, so it aligns with that specific Knape and Vogt track family designation.
The SAP Description states this ball bearing roller fits in KV1095 track, so the roller is tied directly to that track label for matching within a sheaves and tracks layout.
The Web Description notes that the steel ball bearing roller press fits into the bottom of the 1095 shoe, defining where the roller is held within that shoe during assembly.
The Web Description specifies 1/4 inch thick glass doors only, so this roller is aligned to door runs using glass at that thickness in the Roll-Ezy system.
The Product Data lists the manufacturer part number as 1098 ZC, giving an exact Knape and Vogt identifier for specifying this ball bearing roller.
The Product Data classifies it under builders hardware and sheaves and tracks, so it sits within sliding track and roller hardware selections.
The Roll-Ezy Aluminum Track System Ball Bearing Roller from Knape and Vogt, identified as 1098 ZC, is described for use with KV Roll-Ezy 1/4 inch Aluminum Track System and fits KV1095 track. The Web Description also notes it is a steel ball bearing roller that press fits into the bottom of the 1095 shoe and is specified for 1/4 inch thick glass doors only. For projects built around KV Roll-Ezy 1/4 inch aluminum track, KV1095 track, and the 1095 shoe with 1/4 inch glass doors, this defined combination points to this roller as the matching component.
Sold In: 1 Each
