1/4" NPT Female Conversion Fitting to #5 JIC Male
Description
1/4 NPT Female Conversion Fitting For Spray Setups
1/4 NPT female conversion fitting is a C.A. Technologies repair and replacement component designed to adapt spray equipment connections, so existing guns, pumps, and hoses can be reused rather than swapped out. This fitting connects a 1/4 inch NPT female side to a #5 JIC male side, so installers can bridge between threaded NPT ports and JIC-style hose or equipment connections in one step. As part of the C.A. Technologies spray equipment fittings line, it targets real-world spray finishing layouts where equipment from different systems must be tied together. The component is identified by manufacturer part number 53-591, giving a consistent reference when matching to parts lists or previous orders. Because it is classed as a repair and replacement component, it suits both new layout tweaks and in-field changes to existing spray lines using Wurth Baer Supply parts.
Key Fitting Details That Support Spray Work
- The 1/4 inch NPT female side mates to spray equipment or lines with NPT ports, letting existing pumps or guns remain in service when adapting connections.
- The #5 JIC male side provides a JIC-style connection point, so technicians can link to hoses or equipment using that interface without re-plumbing the whole system.
- The fitting is part of the C.A. Technologies spray equipment offering, helping maintain consistency when standardizing on that brand in a finishing shop.
- As a repair and replacement component, it suits maintenance tasks where changing one connection point restores or updates an existing spray setup efficiently.
- The fitting is used to convert C.A. Technologies guns for use with a Kremlin pump, aligning different brands in one working spray circuit.
- It also converts a C.A. Technologies pump for use with a Kremlin gun and hose, so cross-brand configurations can stay in regular production.
Connection Layout And Spray Line Integration
This C.A. Technologies fitting sits between components in a spray equipment line, with its 1/4 inch NPT female side threading onto spray guns or pumps that use NPT ports, turning that port into a workable connection point for different downstream gear. The #5 JIC male side then becomes a ready interface for spray lines or equipment set up for JIC-style connections, linking different systems without replacing core components. By giving a direct NPT-to-JIC transition, it supports clean routing of spray fluid paths when joining C.A. Technologies equipment with Kremlin pumps, guns, or hoses in a single line.
Using This Fitting In Mixed Spray Systems
Where This Conversion Fitting Is Applied
This 1/4 inch NPT female conversion fitting to #5 JIC male is used in spray equipment layouts that combine C.A. Technologies and Kremlin components, so installers can keep existing investment working together. When a C.A. Technologies spray gun must be run from a Kremlin pump, the fitting is placed so the 1/4 inch NPT female side threads to the CA Technologies gun or related connection point, allowing the Kremlin pump side to interface through the JIC connection. In the opposite situation, where a C.A. Technologies pump must feed a Kremlin gun and hose, the fitting serves as the transition piece, with its NPT female side tied to the CA pump connection and its #5 JIC male side used as the link toward the Kremlin gun and hose line. Because it belongs to the spray equipment fittings category, it fits naturally into shop setups already using Wurth Baer Supply spray components.
Why The 1/4 NPT To 5 JIC Design Matters
The specific combination of a 1/4 inch NPT female side and a #5 JIC male side means this fitting addresses a defined connection gap between NPT-based C.A. Technologies components and JIC-based Kremlin components, reducing rework when aligning mixed systems. Having the 1/4 inch NPT side as female allows direct threading onto many spray equipment ports without extra intermediates, so the existing CA gun or pump layout stays largely intact while adding only this one part. The #5 JIC male side then creates a stable interface for JIC hoses or equipment used with Kremlin guns or pumps, streamlining the path from pump to gun and hose in either direction. Identifying the part as 53-591 helps maintenance teams match documentation, so the same transition detail can be repeated across multiple spray stations for consistent setups.
Common Questions About This Spray Fitting
What connections does the 53-591 fitting provide?
The 53-591 fitting provides a 1/4 inch NPT female connection on one side and a #5 JIC male connection on the other, allowing a direct transition between those two thread styles in a spray system.
How is this fitting used with CA Technologies guns?
This fitting converts CA Technologies guns for use with a Kremlin pump, so a gun designed around CA Technologies connections can be tied into a Kremlin pumping setup using the two different thread interfaces.
How does the fitting help when using a CA Technologies pump?
The fitting converts a CA Technologies pump for use with a Kremlin gun and hose, allowing the pump outlet connection to transition through the 1/4 inch NPT female and #5 JIC male layout.
What product category does this fitting fall under?
This fitting is in the spray equipment fittings category and is classified as a repair and replacement component, supporting adjustments and maintenance of existing spray systems.
Which brand manufactures this conversion fitting?
The conversion fitting is manufactured by C.A. Technologies, aligning it with other CA Technologies spray equipment components carried by Wurth Baer Supply.
How does this fitting support mixed-brand spray setups?
The fitting links CA Technologies components to Kremlin pumps, guns, or hoses by bridging 1/4 inch NPT female and #5 JIC male connections, helping mixed-brand spray systems operate through a single fluid path.
Select This Fitting For Mixed Spray Lines
This 1/4 NPT female conversion fitting to #5 JIC male from C.A. Technologies gives a defined way to connect CA Technologies guns or pumps with Kremlin pumps, guns, and hoses, so spray lines can be aligned without changing core equipment. With its role as a spray equipment fitting and repair and replacement component, it supports both new layouts and updates to working systems. Use the 53-591 part number when standardizing across multiple spray stations, and source it through Wurth Baer Supply to match existing C.A. Technologies spray equipment in the shop.
