Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding SO-63 Sequoia 1mm identifies this PVC edge banding as a Sequoia-themed finish in a 1mm thickness, so it covers raw panel edges with a defined profile that matches Sequoia decorative surfaces in cabinet and furniture work. The 1mm Thick x 15/16" Width detail means the material has enough thickness to handle everyday edge impact while giving you slightly proud coverage on nominal 3/4-inch panels for final flush trimming. The Edge Banding product class groups it with materials specifically intended to finish exposed edges, which keeps substrate cores out of sight and provides a uniform look around door, drawer, or casework perimeters. The Edgebanding & Surfacing|Edgebanding, PVC category shows that this is a PVC-based solution, so it pairs with common shop edgebanding equipment used on PVC rolls for repeatable results in production or serious DIY setups.
The 1mm Thick x 15/16" Width sizing works well when you want a slightly heavier edge detail on case parts, because that thickness leaves a clear band after trimming without feeling oversized. The 15/16" Width dimension also gives enough margin over typical 3/4-inch material for slight panel variation, so you can trim both faces flush while keeping the decorative Sequoia surface fully covering the core. The SEQUOIA EDGEBAND 23 MM 100M/RL description defines a 23 mm wide edgeband supplied in a 100-meter roll, which supports longer runs on edge banding machines and reduces interruptions for roll changes during cabinet or furniture production.
The Edgebanding SO-63 Sequoia 1mm Thick x 15/16" Width format suits cabinet boxes, shelves, and fronts where the Sequoia appearance needs to wrap the panel perimeter. The Edge Banding product class positions it for finishing exposed edges on wood-based panels, so it works along door stiles, drawer fronts, and case sides where raw core would otherwise be visible. The Sequoia SO-63 designation links the edge to Sequoia decorative surfaces, which matters when you want doors, drawer fronts, and carcass edges to read as one continuous finish rather than a mix of tones. The SEQUOIA EDGEBAND 23 MM 100M/RL detail pairs a 23 mm width with a 100-meter roll length, so it can be used efficiently on production edge banders across full cabinet runs, closets, or commercial casework that share the same Sequoia design.
The 1mm Thick profile on this Cleaf S.P.A. edgeband gives a defined shoulder for trimmers, which helps cutting heads track the edge without digging into the decorative layer, supporting clean passes along long panel edges. The 15/16" Width dimension provides a controlled overhang on both sides of typical 3/4-inch stock, which helps reduce rework from exposed core because the band fully covers the substrate before trimming. The PVC classification under Edgebanding & Surfacing|Edgebanding, PVC means it is intended for PVC-capable machines and tools, which supports predictable heating and trimming behavior in shops already set up for PVC rolls. The manufacturer part number 733391061A and SAP description SEQUOIA EDGEBAND 23 MM 100M/RL together create a clear ordering identity, which helps keep future replacements matching in thickness, width, and Sequoia appearance when adding cabinets or repairing panels later.
Edgebanding SO-63 Sequoia 1mm is a PVC edge banding from Cleaf S.P.A., which is used to cover and finish exposed edges on panels in cabinet and furniture projects.
The Sequoia edgeband is 15/16" wide, so it covers standard 3/4-inch panel edges with extra material for trimming both faces flush to the decorative surface.
The 1mm thick edge banding provides a substantial decorative layer on the panel edge, allowing trimming equipment to shape a clean profile without cutting through to the substrate.
SEQUOIA EDGEBAND 23 MM 100M/RL indicates a 23 mm wide Sequoia edgeband supplied in a 100-meter roll, which supports long, continuous edging runs on banding machines.
The SO-63 Sequoia identification ties the edgeband to a specific Sequoia appearance, helping panel edges visually coordinate with matching Sequoia decorative surfaces across a project.
The Cleaf S.P.A. brand and part 733391061A give a precise reference for this Sequoia edge banding, supporting consistent reordering when expanding or repairing matching installations.
The Edgebanding SO-63 Sequoia 1mm Thick x 15/16" Width from Cleaf S.P.A. combines Sequoia appearance, 1mm thickness, and 23 mm (15/16") coverage to address exposed panel edges in coordinated projects. The SEQUOIA EDGEBAND 23 MM 100M/RL format also supports longer cabinet or furniture runs where the same Sequoia finish is required across multiple pieces. For work that calls for PVC Edgebanding & Surfacing in a Sequoia design, this edge banding provides a defined way to carry that look around doors, drawer fronts, and casework in a consistent manner.
Sold In: 1 m