3WAY POWER BLOCK 2FT 12/3 identifies a compact power block adapter that provides three outlets from a short, heavy cord, which helps distribute power to several tools or task lights in a tight work area without dragging a long cord around the shop or job.
The Southwire Jacket Contractor Grade Power Block Adapter description establishes that this adapter is intended for contractor use, which gives installers and shop teams a cord designed for repeated handling during daily setups and takedowns.
The product is categorized under power cords and shop lighting, so it is suited to feeding portable lights or corded tools, keeping temporary power organized wherever a small cluster of equipment is staged.
The 2-foot length referenced in the SAP description keeps the power block close to the tools instead of the wall outlet, which helps concentrate connections where work is happening while limiting excess cord that can create clutter on the floor.
The 12/3 designation in the SAP description refers to a 12-gauge, 3-conductor construction, which provides a robust cord structure for demanding shop and site tasks where cords are routed around benches, carts, or rolling cabinets.
The Northern Safety brand association ties this power block adapter to a supplier focused on shop and safety supplies, which fits environments where crews prioritize dependable power distribution as part of their daily workflow.
The 2-foot length in the SAP description places this power block adapter between a primary extension cord and the connected tools, which helps keep plug connections collected in one small area instead of dispersed along a long run of cable.
The 12/3 construction referenced in the SAP description specifies three conductors within a 12-gauge cable, which supports typical tool and lighting loads used in woodworking and shop environments where multiple pieces of equipment share one power point.
The solid-molded adapter noted in the web description keeps the outlet body fixed to the cord as a single unit, which helps the block sit as a stable hub when placed on a bench, hung from a support, or set at the base of a workstation.
The double thick exterior jacket rated for 600v in the web description allows the cord to be routed through normal shop pathways, which supports repeated positioning and repositioning around workpieces and fixtures during daily production.
The Powerlite power indicator that glows when energized means installation can be visually confirmed at a glance, which is useful when cords are daisy-chained or routed behind cabinets where receptacles are not always visible.
The category listing as shop and safety supplies with a power cords and shop lighting product class places this power block adapter squarely in environments where temporary power is needed for portable lights and corded equipment around benches and machines.
The Northern Safety branding associates the Southwire Jacket Contractor Grade Power Block Adapter with safety-focused shop gear, which aligns well with commercial woodworking operations that organize power distribution as part of their everyday process.
The three-way power block identity in the SAP description highlights that this adapter creates multiple outlets from a single feed, which is useful at assembly tables, finishing stations, or temporary tool clusters that need several devices running from one drop.
The 2-foot 12/3 configuration from the SAP description makes this adapter a short extension between a main extension cord and the tools, which keeps the outlet cluster within easy reach without adding excessive length onto existing cable runs.
The 600v double thick exterior jacket specified in the web description is suited for routes across shop floors and work platforms, which helps the cord perform when dragged, repositioned, or stepped on during normal tool movements.
The solid-molded adapter construction mentioned in the web description means the outlet body is bonded directly to the cable, which supports consistent performance when plugs are inserted and removed repeatedly through the day.
The Powerlite power indicator that glows when the cord has power delivers immediate feedback about circuit status, which helps crews quickly identify live blocks during setup or diagnose whether an issue is upstream from the adapter.
The UL listed statement in the web description confirms evaluation to an established standard, which gives facility managers and supervisors a documented basis when selecting power distribution components for use with shop equipment.
The note that this adapter complies with OSHA standards links its design to recognized workplace safety requirements, which supports its use on regulated jobsites where electrical equipment must align with those expectations.
The 12/3 construction referenced in the SAP description provides a defined conductor configuration within the jacket, which helps maintain performance when multiple tools draw power through the block during demanding shop tasks.
The 600v rating associated with the double thick exterior jacket in the web description reflects a jacket designed for higher-voltage environments, which fits industrial and commercial locations that use robust cords for general power distribution.
The manufacturer part number 8369 recorded in the product data uniquely identifies this specific Southwire Jacket Contractor Grade Power Block Adapter, which helps buyers reorder the same configuration whenever additional identical adapters are needed for expansion.
The Southwire Jacket Contractor Grade Power Block Adapter is a three-way power block adapter, so it functions as a compact hub for powering multiple tools or lights from a single cord run.
The 3WAY POWER BLOCK 2FT 12/3 description specifies a 2-foot length, which positions the outlet cluster close to your tools while keeping extra cord off the work surface.
The 12/3 designation indicates a 12-gauge, three-conductor cable, which supports typical shop and site tool or lighting loads in a compact, heavy-duty cord.
The Powerlite power indicator glows when the cord has power, so crews can see instantly whether the block is energized before plugging in tools or lights.
The 600v double thick exterior jacket provides a heavy outer layer, helping the cord handle normal movement across floors and around benches in busy work areas.
This contractor grade power block is UL listed and complies with OSHA standards, which supports its role in professional shop and jobsite power distribution.
The Southwire Jacket Contractor Grade Power Block Adapter combines a 2-foot 12/3 cable with a solid-molded three-way outlet body, giving shops and installers a compact way to cluster tool and lighting connections exactly where work is concentrated.
The 600v double thick exterior jacket, UL listing, and OSHA standards compliance outlined in the web description support use in professional environments that demand documented performance and safety alignment.
The glowing Powerlite power indicator shows when the cord has power, while manufacturer part number 8369 and the 3WAY POWER BLOCK 2FT 12/3 designation make selecting and reordering this specific configuration straightforward for expanding your power distribution layout.
Sold In: 1 Each