Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
TPI 30" commercial pedestal fan gives shops and work areas a 30 inch fan head sized to move serious air across equipment and workstations. The fan is identified as a heavy duty commercial pedestal fan, so it is suited to daily use in demanding shop environments where consistent airflow matters.
The pole adjusts from 43" - 60", so the fan height can be set low toward seated work or raised toward standing work areas. This adjustability supports positioning the airflow at the level where staff actually work, which helps improve comfort around benches, machines, and assembly stations.
The fan delivers 10200/6700 CFM, giving two airflow outputs for different ventilation needs. This lets the fan support higher movement in hotter or more congested zones and reduced airflow where gentler movement around tasks is preferred while still maintaining fresh air around workers and materials.
Wurth Baer Supply presents this commercial pedestal fan as part of its shop and safety supplies, aligning it with cooling tasks in woodworking or similar industrial spaces.
The pole adjusts from 43" - 60", which allows the pedestal fan to be fitted under mezzanines or raised near open production floors. This range helps installers align airflow with specific process areas, from lower worktables to taller equipment faces.
The 9' power cord with SJT-type 3-conductor plug lets the fan plug into standard shop circuits while still reaching interior floor locations. This length reduces the need to reposition outlets when arranging airflow paths across aisles, saw lines, or assembly rows.
The single phase motor requirement means the fan operates from common single phase power typical in many shops, simplifying placement wherever standard receptacles are present.
The SAP description identifies this as a commercial pedestal fan, 30IN, heavy duty, placing it in busy shop and industrial spaces that demand extended operation. Within Wurth Baer Supply offerings, it sits under shop and safety supplies for cooling, fans, and sport drinks, connecting it directly to work-area cooling in production and fabrication settings.
The 30 inch fan diameter pairs with 10200/6700 CFM airflow output, positioning the fan for larger bays, shared workbenches, or high-heat processes where small fans struggle to move enough air. This capacity supports creating air movement over wider spans, such as between parallel machines or across multiple workstations lined along a wall.
Because the pole adjusts from 43" - 60", the same fan can serve low work like bench assembly or higher work such as standing stations near panel saws or sanding equipment. Installers can stage several units at different heights to establish layered airflow zones across the shop floor without changing fan models.
The 9' cord length with SJT-type 3-conductor plug gives flexibility to place the fan between machines where cords must travel around bases or along walls. This helps position the fan where airflow is most useful rather than only where outlets happen to be located, improving coverage in dense layouts.
The single phase, ball bearing, open ventilated, permanently lubricated motor directly affects day-to-day reliability. Ball bearings support smooth shaft rotation during continuous use, which is common in commercial shops that run fans throughout shifts. Permanent lubrication means the bearings are prepared for extended operation without separate lubrication procedures, reducing routine service tasks around each unit.
The open ventilated motor construction exposes internal areas to surrounding air, helping remove motor heat as the fan operates. In hot shop environments, this aids in keeping motor temperatures moderated while it drives the 30 inch blade at airflow levels of 10200/6700 CFM, which places steady load on the motor.
UL listing confirms that the fan has been evaluated to UL electrical standards, which has practical implications wherever multiple electrical loads share panels, because it supports consistent behavior within known limits. Compliance with OSHA standards aligns the fan with workplace safety expectations, making it suitable for facilities that operate under OSHA oversight for shop cooling and ventilation aids.
The SJT-type 3-conductor plug confirms a three-wire power connection, supporting grounded operation in shop environments where conductive dust and metal tools are common. Combined with the 9' cord, this plug style lets installers route power safely to the fan while maintaining grounding continuity across receptacles and extension runs inside working areas.
The product is described as a commercial, heavy duty pedestal fan in the shop and safety supplies category, so it is intended for shop and industrial cooling tasks.
The pedestal fan pole adjusts from 43" - 60", so the fan head height can be set anywhere within that range to target different working levels.
The fan delivers 10200/6700 CFM, giving two airflow outputs so it can serve higher movement needs or more moderate air movement zones in the same facility.
The fan uses a single phase, ball bearing, open ventilated, permanently lubricated motor, which supports continuous operation on standard single phase power.
The fan has a 9' power cord with an SJT-type 3-conductor plug, giving extended reach from wall outlets to the desired fan position on the floor.
The fan is UL listed and complies with OSHA standards, tying its construction to recognized electrical and workplace safety requirements for commercial use.
This TPI 30" commercial pedestal fan from Northern Safety combines a 30 inch heavy duty fan head with 10200/6700 CFM airflow, so it supports ventilation in active shop and industrial areas. The pole adjusts from 43" - 60", letting installers place air where people work rather than only at floor level.
The single phase, ball bearing, open ventilated, permanently lubricated motor and 9' power cord with SJT-type 3-conductor plug simplify setup on common shop circuits. For buyers needing a commercial pedestal fan that aligns with UL listing and OSHA standards, this model offers targeted airflow, clear safety credentials, and placement flexibility for cooling real work areas.
Sold In: 1 Each