Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Moldex 8000 multi gas vapor respirator cartridge is designed for use with 8000 Series Half Face Piece Respirators, so it functions as the gas and vapor filtration component in that specific Moldex system. By matching the cartridge to the 8000 Series half facepiece, the assembly maintains the intended interface between the facepiece and the filter, which helps the respirator perform to its design when set up correctly on the job. This cartridge is recommended for respiratory protection against organic vapors, which means it targets many common solvent-type fumes encountered around coatings, cleaners, or similar shop chemicals. That recommendation gives installers and shop crews a defined option when planning work around those vapor exposures. The same cartridge is also recommended where a mix of listed gases and vapors is present, so a single cartridge type can be selected from the Moldex 8000 line for those specified contaminants.
The Smart Moldex 8000 multi gas/vapor respirator cartridge is specified for use with 8000 Series Half Face Piece Respirators, so selection is tied directly to that Moldex 8000 platform. Matching the 3483 cartridge to an 8000 Series half facepiece keeps the respirator set within the manufacturer-defined system, which helps maintain consistent interface geometry between the mask and the cartridge. That consistent interface matters when assembling or changing cartridges, because it supports repeatable attachment and helps the respirator function as intended within that product line.
The Moldex 8000 multi gas/vapor respirator cartridge, manufacturer part 3483, is recommended for respiratory protection against clearly listed contaminants: organic vapors; ammonia; methylamine; chlorine; hydrogen chloride; sulfur dioxide; hydrogen fluoride; chlorine dioxide; and formaldehyde, plus hydrogen sulfide for escape only. Having that defined list allows a shop or site to align the 3483 cartridge with work areas where those specific gases and vapors are part of the air environment. Because it is used with 8000 Series Half Face Piece Respirators, the cartridge fits into scenarios where workers are already standardized on that Moldex half facepiece system. That consistency supports planning around cartridge type when scheduling tasks that generate the listed vapors, so crews can rely on a known respirator configuration during those operations.
The Moldex 8000 multi gas/vapor respirator cartridge is recommended for a broad range of named contaminants, so each listing ties directly to practical job conditions. Organic vapors often arise from coatings or solvents, and having a cartridge recommended for those helps align respirator selection with those materials. Ammonia, methylamine, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, chlorine dioxide, and formaldehyde appear in various industrial and maintenance environments, and the cartridge recommendation for these gases or vapors lets planners match one cartridge type to that mix when present. Hydrogen sulfide being specified for escape only indicates that, for that particular gas, the cartridge role is focused on leaving an area where hydrogen sulfide is present. Using a cartridge that is recommended for all of these listed contaminants within the 8000 Series Half Face Piece Respirators system supports consistent respirator setup across different tasks that share the same group of specified gases and vapors.
The Moldex 8000 multi gas/vapor respirator cartridge is for use with 8000 Series Half Face Piece Respirators, so it is matched to that specific Moldex half facepiece system.
The cartridge is recommended for organic vapors, ammonia, methylamine, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, chlorine dioxide, formaldehyde, and hydrogen sulfide for escape only, so it targets that defined group of contaminants.
The Moldex 8000 multi gas/vapor respirator cartridge is recommended for hydrogen sulfide for escape only, so its hydrogen sulfide role is tied to leaving an exposure area.
The designation multi gas/vapor on the Moldex 8000 cartridge reflects that it is recommended for several named gases and vapors, so one cartridge type can address that specified mix.
The Smart Moldex 8000 multi gas/vapor respirator cartridge on this page is presented under the Northern Safety brand, so it aligns with that supplier identity.
Manufacturer Part 3483 identifies this specific Moldex 8000 multi gas/vapor respirator cartridge, so buyers can match documentation, inventory, and ordering to the same cartridge.
The Smart Moldex 8000 multi gas/vapor respirator cartridge, manufacturer part 3483, is built for the 8000 Series Half Face Piece Respirators and is recommended for a defined list of gases and vapors, including organic vapors and several named industrial contaminants. That combination of system match and clearly stated contaminant recommendations helps align respirator setup with the Moldex 8000 half facepiece when those specific gases and vapors are part of the work. When the job calls for an 8000 Series Half Face Piece Respirator and the listed contaminants are present, this multi gas/vapor cartridge provides a focused option within that respirator line.
Sold In: 1 Pair