Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
AED sign red and black on white clearly identifies automated external defibrillator locations using high contrast colors, which improves how quickly people can spot the sign in an emergency situation along a shop or facility route. The 3D AED sign design uses two panels that project out from the wall at a 45 degree angle, so the message is visible from both the front and the sides as people move through the area. The high impact plastic construction at 1/8 inch thick provides a rigid sign body, which helps the sign stay flat and readable when mounted in busy work environments. The Northern Safety branding on this AED sign ties it to a recognized safety sign line, which supports consistent visual standards across different safety locations in the same facility.
The double flanged AED sign layout supplies two solid legs on either side of the corner, which gives installers stable reference edges when positioning the sign on a flat wall surface above an AED station. Pre-drilled mounting holes in the flanges create fixed attachment points for screws, which saves layout time and supports consistent alignment from one installation to the next along a hallway. The option to use self-adhesive foam tape on this AED sign offers a no-drill mounting method, which helps when walls are finished with materials where drilling would be difficult or undesirable during safety sign placement. The two-panel format that projects from the wall at 45 degrees also influences mounting height and angle decisions, because installers can position the sign where both faces are visible across the intended approach paths.
The 3D AED sign built from high impact plastic fits typical indoor shop and facility environments, where walls line corridors, production areas, and break spaces served by AED units. Because the sign is double flanged and projects at a 45 degree angle, it is suited to flat wall sections near corners or along straight runs where people may approach from multiple directions. The red and black on white AED legend belongs to the safety signs product class, which aligns it with other standard shop and safety supplies used to mark hazards and safety equipment in commercial and industrial settings. The projecting two-panel design is especially useful in hallways, near doorways, or in open work areas where a flat wall sign might be harder to spot from the side as people move quickly past the AED location.
The fixed 45 degree projection angle on the 3D AED sign gives installers a predictable geometry, which supports repeating the same look and viewing angles across multiple AED locations within the same building. The 1/8 inch thick high impact plastic material keeps each panel rigid, which simplifies aligning the edges with nearby architectural lines such as door frames or ceiling grids during installation. Pre-drilled mounting holes on the double flanged design set consistent spacing for screws, which reduces layout measuring and helps different installers match placements when rolling out a safety sign program across several floors. The option to mount using self-adhesive foam tape means the same AED safety sign can be applied to substrates where mechanical fastening is limited, which lets facility planners standardize on one sign style across different wall constructions.
The 3D AED sign is made from 1/8 inch thick high impact plastic, which provides a rigid, durable panel that stays flat on the wall for clear AED identification.
The 3D AED sign projects from the wall at a 45 degree angle, so the AED message can be seen from the front and from the sides as people move through the area.
The AED sign has double flanged panels with pre-drilled mounting holes for screw attachment, and it can also be installed using self-adhesive foam tape on suitable wall surfaces.
The 3D AED sign is suited to indoor shop and facility locations, such as corridors and work areas, where AED equipment needs clear marking along normal traffic paths.
The red and black AED graphics on a white background create high contrast, which helps the AED symbol and wording stand out against common wall colors in workspaces.
The manufacturer part number 28498 identifies this specific Northern Safety 3D AED sign, which helps maintenance and safety teams reorder the same style for consistent signage.
This Northern Safety AED sign in red and black on white gives facilities a 3D wall-mounted marker that can be seen from front and side approaches. The high impact 1/8 inch plastic construction, 45 degree projection, and double flanged mounting design support consistent, visible AED identification wherever defibrillators are installed.
Sold In: 1 Each