
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Wesco swivel wheel drum cradle provides a safe, convenient way to tip, drain, and store 55 gallon drums, so crews can handle heavy drums with controlled movement instead of awkward lifting. This Northern Safety unit uses an easy-to-assemble design, which helps get the cradle into service quickly on the shop floor or in a maintenance area. The cradle is configured for 55 gallon drums, so the frame and wheel layout are set up to support that drum size during tipping and rolling. The design is focused on handling drums while they are being tipped for draining or repositioned for storage, which improves workflow when drums need to be moved between use points. For shops that regularly handle 55 gallon drums, this cradle turns what is normally a difficult two-person job into a more controlled, tool-based process.
This Wesco swivel wheel drum cradle is set up specifically for tipping, draining, and storing 55 gallon drums, so the frame geometry and wheel layout support that drum size through the full movement. The self-steering, load tipping bar is built into the cradle, giving the operator a controlled leverage point when starting or finishing a tip instead of pulling directly on the drum rim. With two swivel and two fixed polyolefin wheels as described in the SAP text, the cradle supports directional control during movement, with the fixed wheels guiding straight travel while the swivel wheels allow turning near racks or dispensing points. Because the wheels are non-sparking polyolefin, the rolling contact surface avoids steel-on-steel at the floor, which is relevant when drums hold flammable or sensitive contents. In day-to-day use, these handling details help turn drum tipping and repositioning into a defined, repeatable workflow.
The Wesco swivel wheel drum cradle is described as a safe, convenient way to tip, drain, and store 55 gallon drums, so it fits directly into workflows where drums are received, staged, dispensed, and then set aside. When a 55 gallon drum needs to be used for dispensing, the cradle supports tipping the drum from a vertical transport position toward a draining orientation while the frame carries the drum weight. Once tipped, the cradle holds the drum for draining operations, which is useful near pumps, valves, or funnels attached to the drum opening. After draining or partial use, the same cradle can be used to roll the drum into a storage area while it remains supported by the frame and wheels. This pattern keeps the drum in contact with a defined support surface rather than shifting repeatedly between pallets, racks, and floor spots. Because the cradle is focused on 55 gallon drums, shops that standardize on that drum size can assign it to common handling routes, from unloading areas to use points, with consistent behavior each time.
The easy-to-assemble design of this Northern Safety drum cradle helps installers and shop staff put the unit into service without complex build steps, so the cradle can be assigned quickly to a drum handling station instead of waiting for lengthy setup. The self-steering, load tipping bar gives a predictable leverage point each time a 55 gallon drum is tipped, which reduces variation in how different operators start the tipping motion and helps keep the drum travel path consistent. Non-sparking, polyolefin wheels support rolling the cradle across typical shop floors while reducing sparking behavior at the wheel interface, which matters when drums contain materials where vapor or spill exposure requires controlled handling. The wheel layout described as two swivel and two fixed positions in the SAP text allows straight-line tracking with fixed wheels while the swivel wheels aid maneuvering around obstacles or into tighter storage rows. With the cradle identified as manufacturer part number 8273, supervisors and buyers can tie this exact configuration to internal maintenance plans, knowing the tipping bar, wheel materials, and drum handling focus match the tasks expected in their facility.
The Wesco swivel wheel drum cradle is described for use with 55 gallon drums, so its frame and wheel layout are set up around the dimensions and weight distribution typical of that drum size.
The self-steering, load tipping bar provides leverage during drum movement, so the operator can control the tipping motion of a 55 gallon drum rather than pulling directly on the drum itself.
The non-sparking, polyolefin wheels reduce metal-on-metal contact at the wheel contact surface, which matters when handling drums that may contain flammable or sensitive materials in shop or maintenance areas.
The configuration with two swivel and two fixed wheels supports straight-line travel using the fixed wheels, while the swivel wheels help the cradle turn into aisles or align near dispensing and storage locations.
The drum cradle supports tipping and holding a 55 gallon drum in a draining orientation, so the frame carries the load while the operator manages the drum opening and connected dispensing equipment.
This Northern Safety drum cradle is identified by manufacturer part number 8273, which ties directly to the Wesco swivel wheel drum cradle configuration described in the product information.
The Wesco swivel wheel drum cradle from Northern Safety is centered on safe, convenient tipping, draining, and storing of 55 gallon drums, so it aligns with drum handling tasks in shops and maintenance areas. Its non-sparking, polyolefin wheels and self-steering, load tipping bar work together to support controlled drum movement from staging to dispensing to storage. With the configuration noted as two swivel and two fixed wheels and identified by manufacturer part number 8273, this cradle matches operations built around 55 gallon drums where consistent, repeatable handling is a priority. For buyers standardizing drum handling equipment, choosing this cradle links daily drum movement to a defined, purpose-built tool.