Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice 200 Series concealed hinge is built for thick cabinet doors that need a wide 155-degree opening arc and a full overlay position, on both face-frame and frameless cabinets.
A 155-degree opening hinge is the right pick when full door clearance matters. On base cabinets with deep roll-out trays, on entertainment units with pull-out shelves, or anywhere a door left at 110 degrees would block the interior, the wider swing keeps the whole opening accessible. Combined with thick door geometry, this hinge handles doors that a standard concealed hinge cannot seat: the 35mm cup bores into the door at 11mm deep, and the arm's geometry is engineered to carry the added door mass without the arm binding against the cabinet face.
The hinge clips to a Salice base plate mounted to the cabinet, sold separately. Plates are Salice-specific, so pair this hinge with a plate from the same brand's range for a correct fit.
The hinge body is steel with a nickel finish. Screw-on mounting is the connection used when system holes are absent or when a mechanical screw hold is simply more appropriate for the cabinet construction. There are no press-in fasteners to worry about, just wood screws into the cabinet side or stile. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm and minus 1.5mm give you enough range to align doors accurately after the cabinet is set, which matters more on thick door work where the margin for error is smaller.
This hinge suits cabinet shops, millwork professionals, and serious installers working with doors that exceed the standard thickness window. It handles both face-frame and frameless construction, so it works across traditional American cabinetry with a front stile and modern European-style box cabinets. Designers specifying hardware for furniture-weight doors or slab fronts over 22mm will find the thick door geometry essential here. For doors in the standard 16 to 22mm range, a standard concealed hinge in this series is the better fit.
No. The hinge arm connects to a Salice base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet type and overlay requirement.
A standard concealed hinge is engineered for doors roughly 16 to 22mm thick. A thicker door changes the cup depth and arm geometry needed for the door to close flush without binding. Thick door hinges like this one are built with the geometry to handle that extra mass and depth correctly.
This hinge is self-close, meaning a spring pulls the door shut over the last few degrees. It does not have a built-in damper. For a cushioned, quiet close at this opening angle, check whether Salice offers a Silentia+ version in this thick door configuration.
Yes. This hinge works on both frameless and face-frame cabinets. Screw-on mounting fastens with wood screws directly to the cabinet side panel or face-frame stile, so no pre-drilled system holes are required.
Specify this hinge when the door is thicker than standard and the design calls for a wide-swing full overlay that keeps the cabinet completely open and out of the way.
Sold In: 1 Each