Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SawStop Floating Dust Collection Guard TSG-FDC is a heavy-duty 4 inch overarm system that captures table-top dust while providing operator protection during both standard and non-through table saw cuts, helping keep the cut line clearer and the work area cleaner. The transparent blade cover is engineered to lift easily, so the user can raise it for quick blade access when changing setups or checking the cut area. The rigid steel overarm is built to swing smoothly away from the table and then back into its operating position, which supports fast transitions between guarded cuts and other operations on the saw. A wide pipe is designed to allow high air volume collection, so the connected dust extraction system can pull chips and dust from above the blade path more effectively. Blade guard dimensions of 3-1/2 inches by 18-1/2 inches define the covered area over typical table saw blades and cut lengths.
The distance between the blade and the end of the extension table is specified at 35-3/4 inches to 68 inches, which defines the saw setups this overarm layout is designed to span along the table length. An inner dust tube diameter of 3 inches and an outer dust tube diameter of 4 inches establish the airflow path from the blade area to the dust collection line for planning hose and system connections. The outer dust tube height above the table is 13-1/2 inches, giving clearance for typical workpieces while still positioning the collection point close to the blade area. Outer dust tube height above the floor is adjustable from 33-1/2 inches to 50 inches, which helps align the overarm assembly with different saw stand heights and working positions in the shop.
This overarm dust collection, floating system is built as a rigid steel overarm that locates above the table, so the collection point stays positioned over the blade and workpiece during cutting. The specified distance from the blade to the end of the extension table, 35-3/4 inches to 68 inches, defines the table and extension arrangement this guard is intended to span, helping the overarm reach across common extension configurations. With the blade guard dimensions of 3-1/2 inches by 18-1/2 inches, the guard extends both over and ahead of the blade path, helping capture dust along a substantial portion of the cut on the table surface. The outer dust tube sits 13-1/2 inches above the table, placing the suction point close to typical stock thicknesses so airborne dust is drawn toward the guard rather than dispersing across the table. Inner and outer tube diameters of 3 inches and 4 inches create a stepped airflow path that works with a wide pipe design to support high air volume extraction from above the cut.
The floating dust collection guard uses a transparent blade cover that is engineered to lift easily, so operators can raise the cover when changing blades or setting up cuts without removing the entire overarm. This quick-lift function reduces the time spent repositioning the guard while still letting the user return the cover to the same guarding location over the blade. The rigid steel overarm is designed to swing smoothly away from the cutting area, which helps when positioning large panels or long stock that extend beyond the normal guard area. Once the workpiece is in place, the overarm swings back into operating position, keeping the collection point over the blade for consistent dust capture. The adjustable outer dust tube height above the floor, from 33-1/2 inches to 50 inches, lets the assembly align with different saw heights so the swing motion and guard location remain consistent in various shop setups. A 1 year warranty backs the overarm dust collection, floating guard, providing defined support for this SawStop TSG-FDC dust collection component in regular woodworking use.
The SawStop Floating Dust Collection Guard TSG-FDC is designed for both standard and non-through table saw cuts, so it collects dust whether the blade passes fully through the material or stays partially buried in the workpiece.
The transparent blade cover is engineered to lift easily, letting the user raise it for quick blade access so blade changes and adjustments can be handled without disassembling the guard assembly.
The inner dust tube diameter of 3 inches and outer dust tube diameter of 4 inches define the airflow path, working with the wide pipe to allow high air volume collection from above the blade.
The overarm dust collection guard is specified for a distance between the blade and the end of the extension table from 35-3/4 inches to 68 inches, matching common table and extension setups.
The outer dust tube height above the table is 13-1/2 inches, positioning the collection point above typical workpieces to pull dust away from the blade area during cutting.
The outer dust tube height above the floor adjusts from 33-1/2 inches to 50 inches, allowing the overarm layout to align with different table saw stand heights in the shop.
The SawStop Floating Dust Collection Guard TSG-FDC combines a heavy-duty 4 inch overarm, a transparent lifting blade cover, and a wide high-volume dust pipe to control table-top dust on SawStop setups. Defined distances from the blade to the end of the extension table, along with specified tube diameters and heights, give clear layout parameters when positioning the guard on the saw. With a rigid steel overarm that swings smoothly and an over-table guard sized at 3-1/2 inches by 18-1/2 inches, this overarm dust collection, floating solution provides a structured way to manage dust during standard and non-through cuts while maintaining access to the blade area.
Sold In: 1 Each