Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Subtle Surge knob gives you a polished nickel 1-9/16 inch long pull point for doors and drawers, so you get a consistent, easy hand feel across your run of cabinets. This Berenson Corporation knob uses solid brass construction, which provides a dense, weighty feel that installers and clients notice when they open and close doors repeatedly. The 3/4 inch width shapes a compact grip area, so the knob stays proportional on smaller fronts while still being comfortable for a fingertip pull. With a 1-1/4 inch projection, the knob stands off the face enough for fingers to clear the cabinet surface, reducing scuffing around the hardware in everyday use. The polished nickel finish gives a bright, reflective surface, which coordinates well with other polished nickel decorative hardware and supports a unified look in kitchens, baths, or built-ins.
This Subtle Surge series polished nickel knob has a length or diameter of 1-9/16 inches, which gives you a clear reference for setting reveals from door edges or drawer top rails during layout. The knob projection of 1-1/4 inches defines how far it stands off the cabinet face, which helps you plan clearances near adjacent walls, appliances, or neighboring doors. With a width of 3/4 inch, the knob occupies a modest footprint on the stile or drawer front, supporting clean layouts even on narrower fronts. The screw size specified as 8-32 x 1 inch establishes the thread and length pairing at the mounting point, so you can drill appropriate pilot holes and match this knob into common cabinet construction thicknesses.
The Subtle Surge knob from Berenson Corporation fits naturally into decorative hardware runs on cabinets where a polished nickel finish is already part of the design. Its 1-9/16 inch length keeps the knob visually substantial on standard kitchen and bath doors, which helps it hold its presence against full-overlay fronts. On smaller vanity or built-in doors, the 3/4 inch width allows the knob to sit comfortably on narrow stiles without overpowering the panel layout. The 1-1/4 inch projection helps when doors are set near casing or adjacent cabinetry, giving you enough hand clearance while staying tight enough to the face for a clean, tailored look. Because the material is solid brass, the knob suits higher-use areas such as kitchen bases, wall cabinets, and frequently opened drawers where a solid feel is expected.
The defined 1-9/16 inch length or diameter on this Subtle Surge knob makes it easier to repeat hole locations from door to door, which keeps hardware lines straight across a large installation. The combination of 3/4 inch width and 1-1/4 inch projection sets a predictable offset from the cabinet edge, so jigs or templates can be set once and used throughout a project to maintain consistent spacing. The specified 8-32 x 1 inch screw size standardizes the connection point, which streamlines drilling and tapping operations around a single fastener dimension on site or in the shop. Working with polished nickel finish also helps when coordinating with existing polished nickel hardware, since the bright surface supports a continuous appearance when knobs are installed across multiple rooms or cabinet banks.
The Subtle Surge knob uses solid brass material, which gives a dense feel and supports long-term performance on frequently used cabinet doors and drawers.
The knob has a length or diameter of 1-9/16 inches, a width of 3/4 inch, and a projection of 1-1/4 inches, which defines its footprint and stand-off on the cabinet face.
The 1-1/4 inch projection sets the knob far enough from the door or drawer face for finger clearance, helping reduce rubbing and wear around the pull point.
The 1238-1014-P knob has a polished nickel finish, which provides a bright, reflective surface that coordinates with other polished nickel decorative hardware.
This cabinet knob uses an 8-32 x 1 inch screw size, aligning with common cabinet construction and simplifying pilot hole sizing and hardware matching.
This polished nickel knob is part of the Subtle Surge collection from Berenson Corporation, helping you coordinate style across matching decorative hardware pieces.
The Subtle Surge knob in polished nickel gives you a solid brass option with a 1-9/16 inch length, 3/4 inch width, and 1-1/4 inch projection, so you can plan consistent layouts across a full cabinet project. With its 8-32 x 1 inch screw size and defined dimensions, this Berenson Corporation knob aligns smoothly with standard cabinet construction. For projects through Wurth Baer Supply that call for polished nickel decorative hardware, this knob fits into runs where a bright finish and solid feel are part of the design goal.
